Waxberry 637 Posted November 15, 2019 Share Posted November 15, 2019 Updated 18 Aug 2020: Updated flashable package to 188.8.131.52. Many thanks to Adam Pigg who has fixed many bugs and implemented many featured including fingerprint reader and encrypting user data, which will be available shortly. Another change for this package is after flashing, user will be on testing repository instead of devel, it's highly recommended for previous users to switch to. Disclaimer: This is the unofficial community build of Sailfish OS, and it's still work in progress and in Alpha state. It is not yet suitable for daily use. Flash at your own risk. If you wish to restore back to stock Android, please follow this thread. Fxtec is not responsible for any damage or data loss to the device during this process, and/or the use of Sailfish OS. If you want to learn more about Sailfish OS, please visit: https://sailfishos.org/ Credit to the developers: Nikita Ukhrenkov (TheKit) Michał Szczepaniak (Mister_Magister) Adam Pigg (Piggz) Download Sailfish OS for Fxtec Pro1 from the following link: https://drive.google.com/file/d/1tIyq1DgnwIR9533-qze2KKlUhy6-2npt/view?usp=sharing Preparation: TWRP for Pro1: Download here (Credit to Mccreary) Universal ADB Driver A MicroSD Card, preferably no more than 32GB Backup your data (if needed) and turn off the phone completely Transfer the TWRP image into the adb folder of your PC, and Sailfish OS package zip-file to MicroSD card. Insert the MicroSD card to your phone on SIM Slot 2. Procedures: For units shipped after November 19, you need to unlock Bootloader first, by enabling developer mode in Android, and enable OEM unlocking and USB debugging. Then following the steps. Hold Vol Down while pressing the power key, then release both fingers together and the phone should boot into bootloader Connect the phone to PC and run fastboot devices If the phone is successfully connected, the phone should be listed in command line. Then type: fashboot flashing unlock then using vol +/- navigate to "Unlock Booloader", and select with the power key Warning: All your data will be wiped after Bootloader is unlocked! Please back up! After unlocking bootloader, boot into BL again using vol- + power key, and perform: fastboot set_active a fastboot flash boot twrp-3.3.1-qx1000.img Use volume up/down to scroll, to Recovery mode and power key to select, from bootloader. And wait for TWRP to boot. In TWRP go to Wipe -- Format Data (Warning: All your data will lost.) --- type yes, and click blue tick When format is completed, go back three times and go to reboot and choose to reboot into recovery (swipe to confirm) Choose to install and select storage SD, In lower right click Install Zip (not image) navigate to where you put the Sailfish OS zip package click it. Make sure signature verification check is off. Swipe to install Wait until the installation is finished and choose reboot. The device will now boot into Sailfish OS. ============================================================================================ We will update this guide along with the development going on. And we welcome any contribution to the community version of Sailfish OS running on Pro1. 9 10 Quote Link to post Share on other sites
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.