kevg 14 Posted January 26 Share Posted January 26 I just got a new Pro1-X and I'm following the rooting with Magisk document: https://community.fxtec.com/topic/3690-pro1-x-rooting-with-magisk/ Everything works up to step 11 of the "Root Pro1-X via Magisk" section. I have magisk_patched-25200_HsxJg.img locally downloaded from step 10. Next, in step 11, I run adb reboot bootloader. It restarts to the attached image (IMG_20230125_213340_947.jpg). If I try to run fastboot flash boot magisk_patched-25200_HsxJg.img, I just get the following: $ fastboot flash boot magisk_patched-25200_HsxJg.img < waiting for any device > So then I tried scrolling to Recovery mode, and pressing power. That then restarts to the "No command" screen (IMG_20230125_213942_773.jpg). I get the same "waiting for any device" output if I try the fastboot flash command here. I found elsewhere that from this screen, I can hold the power button and press the volume up key and then release both and I see the Android recovery screen (IMG_20230125_214520_909.jpg). I get the same "waiting for any device" output if I try the fastboot flash command here. Then I scroll down to Enter fastboot and press power to enter that. But I get the same "waiting for any device" output if I try the fastboot flash command here. If I go back to recovery mode, and instead go to Apply update from ADB, I then see the following from adb devices, but I still can't run fastboot flash. $ adb devices List of devices attached 8ce396c8 sideload How do I run fastboot flash? Quote Link to post Share on other sites
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.