trahe
-
Content Count
10 -
Joined
-
Last visited
Posts posted by trahe
-
-
1 hour ago, EskeRahn said:
I wa under the impression that the persist partiton contained unique information so copying it would sort of making the two devices clones. Interesting if that is NOT the case as we could thus have one available somewhere.
i still did not figure out, so i am not sure if the e.g. phone works. (e.g. IMEI is not shown)
So know we know, that the root of my problems was regarding to the corrupted persist
but wifi and bluetooth works just fine...
So the the keypoints for the fix:
having some ~working~ persist
i needed to the patched boot.img, which stops early and runs the telnet server,
so i was able to format userdata into ext4- 1
-
so with a lot of help and custom made images from TheKit, now i got it running.
Basically the persist of mine was corrupt.
Some other device persist.img flashed and it worked!- 1
- 2
-
11 minutes ago, brunoais said:
Looks like something really screwed up your partitions... This is now beyond what I can think at the moment. I'm currently out of ideas.
right something about the partitioning is my guess as well
- 1
-
7 hours ago, brunoais said:
I agree. There's no noticeable errors or warnings in the logs.
@trahe I found this almost by chance:
Does it help you? It shows that restoring some of the partitions worked to unbrick his phone.No unfortunately it did not help.
The backups i have are doubtful i guess...
But there is one noticeable difference after running the UBports installer:
the recovery starts with:
Can't load Android System. Your data may be corrupt. If you continue to get this message, you may need to perofrma a factory data reset and erase all user data stored on this device. Try again Factory data reset
So if i choose Factory data reset i get
--Wiping data... Formatting /data E:format_volume: fs_type "auto" unsupported Data wipe failed
- 1
-
OK sure, and thanks for helping
the edl backup procedure i logged,
and for further information i as well included
the output of
fastboot getvar all
the product is *bengal*
the last flash attempt has had been UBTouch
i can as well have Pro1x or QX1050,
depending on which ROM to flash (stock rom / Lineage21 i tried to no bootable avail)
As a sidenote, i as well tried to do the :
Pro1-X: Flash Stock Firmware in
fastbootd Mode
from the "official" Gdocs, and as well installed the newest platform-tools,
butfastboot create-logical-partition checkparti_a 1024 Creating 'checkparti_a' FAILED (remote: 'unknown command')
So i tried as well the QFIL on Windows method (btw:what a hassle to get the driver running)
to me it seems there is no error there, but again, it does not boot.
After the QFIL process, the device is in edl memory dump mode:
edl /Users/htr/Documents/develeop/edl/edlvenv/bin/edl:4: DeprecationWarning: pkg_resources is deprecated as an API. See https://setuptools.pypa.io/en/latest/pkg_resources.html __import__('pkg_resources').run_script('edlclient==3.62', 'edl') Capstone library is missing (optional). Keystone library is missing (optional). Qualcomm Sahara / Firehose Client V3.62 (c) B.Kerler 2018-2024. main - Trying with no loader given ... main - Waiting for the device main - Device detected :) sahara - Protocol version: 2, Version supported: 1 main - Mode detected: sahara Device is in memory dump mode, dumping memory Reading 64-Bit partition from 0x45ef20c0 with length of 0x780 OCIMEM.BIN(OCIMEM): Offset 0xc100000, Length 0x2a000, SavePref 0x1 CODERAM.BIN(RPM Code RAM region): Offset 0x4600000, Length 0x28000, SavePref 0x1 DATARAM.BIN(RPM Data RAM region): Offset 0x4690000, Length 0x14000, SavePref 0x1 MSGRAM.BIN(RPM MSG RAM region): Offset 0x45f0000, Length 0x7000, SavePref 0x1 DCC_SRAM.BIN(DCC SRAM region): Offset 0x1bed000, Length 0x3000, SavePref 0x1 DCC_CFG.BIN(DCC CFG region): Offset 0x1be2000, Length 0x1000, SavePref 0x1 CD_STRCT.BIN(CD STRCT region): Offset 0x40000000, Length 0x1f0, SavePref 0x1 CD_BTDDR.BIN(CD BTDDR region): Offset 0x400001f0, Length 0x100000, SavePref 0x1 CD_BTIMM.BIN(CD BTIMM region): Offset 0x401001f0, Length 0x180000, SavePref 0x1 CD_SHIMM.BIN(CD SHIMM region): Offset 0x402501f0, Length 0x1000, SavePref 0x1 DTDDR0_0.BIN(DDR0 DTTS0 region): Offset 0x44b9000, Length 0x0, SavePref 0x1 DTDDR0_1.BIN(DDR0 DTTS1 region): Offset 0x44b7000, Length 0x0, SavePref 0x1 IPA_IU.BIN(IPA IRAM region): Offset 0x5860000, Length 0x1f00, SavePref 0x1 IPA_SRAM.BIN(IPA SRAM region): Offset 0x5847000, Length 0x3000, SavePref 0x1 IPA_HRAM.BIN(IPA HRAM region): Offset 0x584a000, Length 0x1c54, SavePref 0x1 IPA_MBOX.BIN(IPA MBOX region): Offset 0x5872000, Length 0x100, SavePref 0x1 IPA_GSI.BIN(IPA GSI region): Offset 0x5806000, Length 0x1000, SavePref 0x1 IPA_SEQ.BIN(IPA SEQ region): Offset 0x585e000, Length 0x1fc, SavePref 0x1 PMIC_PON.BIN(Pmic PON stat): Offset 0x45e97000, Length 0x8, SavePref 0x1 PMON_HIS.BIN(PM PON HIST ): Offset 0x45e97008, Length 0xcc, SavePref 0x1 RST_STAT.BIN(Reset Status Region): Offset 0x45e970d4, Length 0x4, SavePref 0x1 DDR_DATA.BIN(DDR Training Data): Offset 0x45eb0964, Length 0x3000, SavePref 0x1 PIMEM.BIN(PIMEM region): Offset 0x10000000, Length 0x900000, SavePref 0x1 FSM_STS.BIN(Rst fsm stat): Offset 0x45e970d8, Length 0x4, SavePref 0x1 FSM_CTRL.BIN(Rst fsm ctrl): Offset 0x45e970dc, Length 0x4, SavePref 0x1 DDRCS0_0.BIN( DDR CS0 part0 Memo): Offset 0x40000000, Length 0x80000000, SavePref 0x1 DDRCS0_1.BIN( DDR CS0 part1 Memo): Offset 0xc0000000, Length 0x80000000, SavePref 0x1 DDRCS1_0.BIN( DDR CS1 part0 Memo): Offset 0x140000000, Length 0x80000000, SavePref 0x1 DDRCS1_1.BIN( DDR CS1 part1 Memo): Offset 0x1c0000000, Length 0x80000000, SavePref 0x1 load.cmm(CMM Script): Offset 0x45ebb084, Length 0x8cc, SavePref 0x2 Dumping OCIMEM.BIN(OCIMEM) at 0xc100000, length 0x2a000
- 1
-
Well i did not do any backup, but started the UB Installer, so it seems i lost this partition
- 2
-
2 hours ago, brunoais said:
If you can login to recovery, then the phone is not bricked. You can still do things with it.
Did you backup the partitions?
Thanks for your reply.
Yes that is for sure i good sign.
Anyhow whatever and however i flash onto it, the result is still a not usable device.
I did not backup the original phone, as i did not intend to use anything but UBTouch.
When booting into UBTOuch, it shows the Android logo, and once i was able, to
telnet 192.168.2.15
dmesg:
...
[ 4.648619] initrd: Halium rootfs is /dev/mapper/system_a
[ 4.649234] initrd: mounting system rootfs at /halium-system
[ 4.653391] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.655506] initrd: WARNING: Android system image not found.
[ 4.655650] initrd: mounting /dev/mapper/system_a (user mode)...
-
7 hours ago, brunoais said:
Just to double-check: Is secure boot confirmed turned off?
It is: I can boot into the ub recovery
-
I had the same issues, and did do all the steps as explained in:
https://drive.google.com/drive/folders/1h0NqcNvkcX0nV5V3VVie4-smEm5ijW36
mentioned here.
The result is still the same bricked phone, even so the QFIL process went flawlessly,
but the reboot still leads to the bricked phone,
this time not even having the recovery partition. (the Lineage and UBTouch recovery worked fine before)
Fairly to say this is the worst experience i had got with any kind of hardware i purchased.
Still have some old Motorola Atrix, for which i stil can use TWRP and flash it successfully with different ROMs on the SDCard.
P.S. Also important: as i reeived the phone it worked, i tried to flash UBTouch, which bricked it.
I really got tired and kept it on my shelf for about 4 weeks (fully charged!)
As i fetched it later and tried to turn it on, it seems the battery was drained below it should be
So finally i needed to do the Rubber Band trick over night to get it trying to power on again.
So this explains even more the worst experience with this piece ofshithardware, which is on top completely outdated,
which i would not even mind, if i would be able to use UBtouch and ssh, which was my intention anyhow
Pro1x is bricked, is there any way to save it?
in How Tos
Posted
As i installed UBTouch the first time, i think Pro1x was recognized.
After some messup i needed to manual select, indeed:
(QX 1050/Bengal i had shown mostly)