dattel

Love you, man. That's great. Now, the problem is to understand how Method 1 (via PBL) for getting into EDL mode is used. If anyone knows which two pads need to be shorted and how it needs to be done, I would be very thankful. Also writing a mail to the user "tdm". Maybe, with a little bit of luck he'll respond.

Well, the problem is, that the bootloader is locked. Therefore the files sent to the device can't be written. e.g. QX1000_user_20200825231445_dd49dd0dd1>fastboot flash mdtpsecapp_a mdtpsecapp.mbn Warning: skip copying mdtpsecapp_a image avb footer (mdtpsecapp_a partition size: 0, mdtpsecapp_a image size: 1078864). Sending 'mdtpsecapp_a' (1053 KB) OKAY [ 0.030s] Writing 'mdtpsecapp_a' FAILED (remote: 'Flashing is not allowed in Lock State') fastboot: error: Command failed Manually unlocking it, isn't also allowed: QX1000_user_202

Yes, I already tried them but most of them are for flashing with fastboot and that's no oppurtunity for this device. The required files (firehose_progammer.edl) are missing. Maybe I could use a Firehose file from a different device which uses the same CPU (SD835)?

Hello guys, I have a bricked QX1000 (Pro1) which I'm trying to reflash but I can't find any files regarding the flashing with QFIL. Would be a shame if it can't be done. QFIL and Windows is not a must. Every method or opportunity would be helpful. The biggets problem seems to be to get the required files. There is also this "Factory Restore Tool" which someone reuploaded last year but the image is missing. Therefore I'm not able to get further... Thanks in advance, Dattel