[3D printed case]

On 5/21/2021 at 12:45 PM, marmistrz said:

It looks like bottom v4 already contains the fix that I wanted to do. I'll print it within several weeks and report.

Meanwhile, these are the photos of my previous print. Because the mini-jack socket was partially covered by the case, I used some pliers to cut out the covering surface. Another thing that didn't go quite well is the upper part of the bottom case - I only used supports on the build plate and I should've also used them inside, so the upper rim is a little frayed - but it holds well enough.

The case was also battle-tested for the first time, the phone once fell screen down onto asphalt from about 30 centimeters and survived unscathed.

Thanks @ubuntuscofield! Do you accept donations?

Mmh never had anyone offer one before, im not against it, id appreciate the gesture too if you are willing to donate..

[3D printed case]

Just now, marmistrz said:

I mean the editable model. For instance if you're using Autodesk Fusion, it would be the .f3d file

Okay ill share my latest revisions

bottom_remade v4 (1).iges top_cut_remade v8 (1).iges top_full_remade v7.iges

[3D printed case]

On 5/18/2021 at 7:57 PM, marmistrz said:

Would you mind sharing the sources? I have issues with the shape of the headphones holes, which is partially covering the mini jack socket, and I'd like to tinker with it and try to fix it myself. Thanks!

I'll upload my photos in a while btw.

Sources? 

[3D printed case]

15 minutes ago, marmistrz said:

that's the sailfish tpu one?

 

Yap

[3D printed case]

5 hours ago, belletrist said:

They look good, Thank you once again. I'll take them for a test drive shortly.

I've been making progress on the 3d modelling front but they still all end up messy in the renders. Your work is appreciated.

im still making changes will show the progress later

[Display units with large tap-insensitive margin]

On 3/31/2021 at 4:10 PM, benoitjeffrey said:

I shattered a screen with a closed flip case, it won't protect the left side of the phone at all.

Personally I really enjoy the 3d printed case from @LIMA but I'm looking closely for the one from @ubuntuscofieldand @belletrist

Those 3d printed case can protect the phone way better than a flip case

Tru dat, ive dropped mine several times with the 3d case and its unfazed, its almost like it doesnt matter if it droips anymore hehe

[Protective Case Suggestions and Ideas]

On 3/31/2021 at 8:30 PM, JordanKirsch83 said:

Could you make one of these in black I will pay you handsomly for it. 

I would but am in Tanzania so far off, but ask @belletrist i gave him the schematics and he printed them well. He might be able to do it for you

[3D printed case]

On 4/7/2021 at 7:34 PM, marmistrz said:

@ubuntuscofieldbump

Attached

fx_tec_pro_1_case_bottom v3 v3 -mod.stl fx_tec_pro_1_case_top.stl

[Selling Pro1or Pro1x. Please no requests for devices, only post if you have one to sell yourself.]

On 3/20/2021 at 7:24 PM, fxtec-preorder-47xx said:

Naaa... mine looks even worse. And I already have my third screen. I mean, you are outside, slightly miss your jeans pocket and boom! 50/50 chance it falls display down onto the concrete.

Fortunatly the plastic frame around the screen still holds (I only swapped the touch+screen itself), but it already has some impact traces. And the keyboard slide mechanics also hold, though I often use it to clip the phone ontop of my notebook screen. Great quality!!1 Anyway... I don't know how you guys canNOT trash your phone that you use daily. Plush handbag? Rubber floors? 😉

Normally I save money by buying used stuff, it's usually 'new' to me 😄 If I buy new, then the stuff is in used condition the moment I unpacked it.

Edit: The edge of the keyboard part is quite sturdy... but you have to focus, when you open your bottle.

u should get a case. i have a 3d printed flexible one i can share the design

[3D printed case]

On 3/15/2021 at 1:58 PM, marmistrz said:

Could you please share the files, so that I could print it myself? Thanks.

which one, the sailfish design or typical one

[3D printed case]

14 hours ago, marmistrz said:

If it's a modified design, which design is it based on?

Well, it was based on @LIMA plus inspiration from keyhanig as he aimed to make a tpu case not a rigid pla case, and finally some minor modifications to make it hold one to the top/bottom halves, lastly some changes were made to allow sailfish users to swipe from the edge. So i guess the credit goes to @LIMA and @Keyhanig for making this possible

 

 

[3D printed case]

50 minutes ago, belletrist said:

The clack in case some of you were wondering.

LOOKS GOOD

[Protective Case Suggestions and Ideas]

3D printed TPU case for Lineage and sailfish users

[3D printed case]

18 hours ago, benoitjeffrey said:

Hi, I am pretty interested by the model, this isn't the shell shared by LIMA.

Is it already shared somewhere I missed or did you make it?

No it isn't, its a modified design

[3D printed case]

First Fully 3d printed TPU case. Done by someone on Telegram

[Selling Pro1or Pro1x. Please no requests for devices, only post if you have one to sell yourself.]

Dont want to wait

[Selling Pro1or Pro1x. Please no requests for devices, only post if you have one to sell yourself.]

Im also interested in buying, it can be sent in the UK/EU too

[Selling Pro1or Pro1x. Please no requests for devices, only post if you have one to sell yourself.]

10 hours ago, mosen said:

Sir, you asked in the discord and we created a buy+sell channel right after your request 😄
There is a never unboxed QWERTZ version up from a trusted member i personally met for 800€ if you did not see.
Or did you see and what you are looking for is QWERTY version?

Oh yes, this was made prior to meeting Noir, i dont mind the qwertz as i really just want the device, however im still waiting on him to reply and se how i can get it from him. Though i am not in Germany i have friends there.

[Selling Pro1or Pro1x. Please no requests for devices, only post if you have one to sell yourself.]

12 hours ago, _DW_ said:

New / Mint?  TBH I'd expect to have to pay more than RRP price.

Yes i am aware of that, do you have one?

[Selling Pro1or Pro1x. Please no requests for devices, only post if you have one to sell yourself.]

39 minutes ago, Asanti898 said:

Well then you may should precise that in your post. And I would also recommend stating what you are willing to pay for it.

New/mint in 2020 likely means around full price

Mr. Asanti898 are you willing to sell?

[Selling Pro1or Pro1x. Please no requests for devices, only post if you have one to sell yourself.]

Mr. Asanti898 are you willing to sell?

[Selling Pro1or Pro1x. Please no requests for devices, only post if you have one to sell yourself.]

Thanks for the reply but i would like to get one quickly and not have to wait sir,

[Selling Pro1or Pro1x. Please no requests for devices, only post if you have one to sell yourself.]

 I am willing to buy a new/mint Fx tec pro 1.As i don't want to wait for the device to ship

[Selling Pro1or Pro1x. Please no requests for devices, only post if you have one to sell yourself.]

Wil you sell?