Leaderboard

Hello, Using gelraen teardown I disassemble my Pro1. I remove dust and (thanks to @DieBruine) screw down with loctite all what I see with abnormally operating clearance. I play a little with cameras stabilizer, everything looks normal. (My phone felt 2,50 m a month ago, and I only had VERY blurry pictures). I reassemble, and test. Oh, pictures look blurry (a little). Then I disassemble the cameras plastic-glass behind, play a little with cameras stabilizer, reassemble glass. (see attached picture from service manual) Surprise ! This camera works perfect, I can now taking pictures

Hi, yeah, I guess you'd be a great book writer :-) from the sound of it this won't help ya (my phone was rattling in the open position, not closed) but anyway. You gotta open the phone, turn it upside down, you'll see 5 black circles in a distinct 'W' pattern on the back of it; carefully remove them with a razor blade or something, there are screws under it. Unscrew, carefully pop out the display from the back frame with a plastic prying tool. Make sure not to break the flex cable, which needs to be disconnected. After the display itself is gone, you'll see where the hinges are; and

Selling my virtually unused Pro1 - in brand new condition with all near factory fresh packaging. In the UK and would prefer to sell there given postage costs elsewhere. Looking for around £550. I thought the keyboard would be to my liking but alas no. Pics below: https://photos.app.goo.gl/1Msg6CphVW4miWqi9

nop, the TOP PART is in place, it's fine for the last year or so. at that time i had to exchange the touch screen which works right ever since. but what definitely and robustly improved (no random behaviour) is the CALL VOLUME function for calls via SIGNAL. my ear drums finally don't get anymore perforated when i answer or do a call with SIGNAL. but i believe i still have no control whatsoever over call loudness when speaking over the REGULAR phone service. and what also seem to work reliably is the LED NOTIFICATION LIGHT, as said earlier, in terms of color control and actual blin

Just FWIW; after brief talk with support (wanted to claim warranty) they made me tighten the *inner* screws (didn't know about those - they act as the hinge axis). Now the rattling is back to something I agreed to call okay. I tried to tighten the bottom screw too (the one holding the support arm) to no luck. Basically the screw is too thin or the hinge is too wide. Now I see a way out though; next time I will take the thing apart I'll try to get hold of some PTFE sticky tape, they come in different thicknesses and just stick it around the screw; hopefully that will keep the thing in good

Certainly not my experience with their repair service. Have you emailed them recently? The pic above just looks like confirmation that it was sent. Has the courier provided any documentation or other proof that it was delivered? I understand your frustration, but I really don't think they have any interest in stealing customers' phones. @Erik, can you be of any help here?

Then I play a little with camera, I think the tricks is good, but maybe not for stabiliser. Anyway it makes good picture, but now you have to be very stable, so a picture taken with phone against a door or a table is perfect, but just with one hand, it's a little blurry... This make sense as the objective is equiped with stabiliser, and has now more limits of movement. Also it could be that problem with long range focus comes from stabiliser...I will investiguate this.

Ok it works, I have just pushed up the camera slice out (picture 62, page 20 in Service Manual V1.0) What I see the camera objective was moving in all directions, I put it back with a small needle or so. Using FV5 camera app (free) I put back objective in place until no blurry pictures. Then I made a very thin washer who cover objective to stabilize it between transparent-plastic-glass cover (the term is "slice" in service manual, is this correct ?), and I take the slice back in place. The result is (for now) very good, and it seems pictures are better because I had

Hello, My phone felt and I have a big scratch in metal near the glass of the camera. Pictures are completly blurry. It look like a misalignment, but It looks better when I press the glass and then I tap a little the phone near the camera objective, I suspect an internal problem with fixation maybe I can fix this, I will try by myself using this teardown. https://github.com/gelraen/fxtec-pro1-teardown It could be not so dramatic, I will give it a try and see what happens internally. I will post results here as I find time to try this quietly.

me too actually - it appears to follow some random pattern in terms of functionality. it worked initially for 2-3 days, what surprise, but now ... once in a while it plays the notification sound, quasi randomly, that's it, so much for the brief joy...sigh !