aaroncv3
-
Content Count
9 -
Joined
-
Last visited
Posts posted by aaroncv3
-
-
On 7/15/2023 at 2:03 AM, Jormsen said:
As it seems to be hardware issues i wonder if it has something to do with missing connection springs.
Is it only my device looking like this?Can't find a seller for these, the closest contacts i can find are these:
OGSC-T-302020 https://www.kitagawa.de/wp-content/uploads/OGSC-TB-302020-1.pdf
SImilar for me. I have one of the springs that you're missing:
I will try using a small bit of metallic tape to bridge the presumed connection to case edge. Will report back.
-
10 hours ago, Hook said:
Thank you, @Hook!
-
On 8/14/2022 at 4:32 AM, spam71 said:
Pro1 disassembly is not very hard - I had some experience, because I replaced screen in my Pro1. So dismounting of screen part was not a problem. Also there is a movie on vimeo showing how to do it, BUT BEWARE! It's misleading!
@spam71, would you kindly link to said video? A cursory search was unsuccessful.
-
1 hour ago, Rob. S. said:
programmer, but intuitively I would locate the reason at the bottom of the driver stack, like in the speakers driver,
Agreed. This is not a manufacturing problem. I would intuitively say this is a bug in 1 line of code in the DSP.
Some mundane detail, like a decimal point. 😆
-
2
-
2
-
-
Yes, right/bottom speaker on mine also cuts in and out. I have not tested pressing on the case. My assumption is that this is a firmware issue. The cutting out seems to occur when the audio exceeds a certain level. I have applied no scientific method to confirm this, yet.
-
1
-
-
On 8/9/2022 at 7:04 AM, sdl said:
My experience isn't quite that bad, I suppose, although it is struggling to keep a 5ghz wifi connection 10ft from my router - and you have to get within 6 before it gets to 'Good'.
Having taken it outside for the first time over my lunch break, its also failing to keep a reliable 4G connection outside when its never been a problem before.It loses the ability to use our wifi on either 2.4 or 5 far closer (8ft closer at least) than my Priv can keep a very reliable 5ghz connection going.
Really hoping something can be done to make it better than it is, its bordering on unusable - I'll happily try stuff out...
Well i thought i double posted a response to this, but now i only see the one i edited and removed everything.
Anyway, I have two 5 GHz access points in the house, one is 25~30 feet away, mounted on the ceiling, within perfect, unobstructed line-of-sight. And the signal strength is "Fair" to "Poor".
No 2.4Ghz access points in the house.
-
1
-
-
20 hours ago, sdl said:
Edit: Oops, duplicate post, because of fumbling with the phone...
-
1
-
-
Same. I bet this is a radio firmware problem, not a radio hardware problem.
I'm sure as more people get their devices, these kinks will get worked out.
-
4
-
Pro1x - really poor connectivity to both wifi and cellular.
in Support
Posted
Yeah, I don't know. Hard to say if it made a connection, but in the attempt the spring that I have that @Jormsen did not have fell off. What a piece of trash.
I held a wire to the other spring under the GPS and that seems to positively affect my 5GHz signal. FWIW.