patrykgrzesiak

No - the same plug, the same voltage, similar capacity, but no way to fit it into Pro1 case

Update: Battery was the culprit. I have replaced the battery with Xiaomi Mi6 BM39 and my Pro1 has successfully booted to Lineage 🙂 Now I can at least transfer all my data...

It is not just the screen - the phone is not detected when connected to computer When I connect 5v to the VBUS line it draws 0.5A for 1-2s, my impression is that it does not go through any initial first step when powered on

I just let it discharge to zero by accident, no other special circumstances - definitely not water damage.

I don't know if anyone still reads it - but I will share my experiences with dead Pro1 Yesterday it discharged and turned off - I connected it to a USB charger and got no reaction, black screen, no diode. I disassembled it and charged the battery to 3.85v on an external power supply, reconnected the battery and still the same, black screen, no reaction. The voltage on the VBAT pin is 3.85v, on the POWER ON pin is 1.8v both with USB charger connected and not connected. The voltage on 1.8v pin is 0 (0.7v with USB connected) When I press the power button the voltage on 1.8v pi

I have received my screen from Aliexpress and it is missing the connector board. Are there any specific instructions how to move it from the broken screen without damaging? edit: There were 2 small screws near the camera and some glue in the middle Screen has been replaced successfully. The screen is ok, everything works as intended. I can recommend the full frame Pro1 screen from Aliexpress 🙂

Thank you. I have ordered one from Aliexpress

And I just broke my screen... 😭 Is it still possible to order a replacement from FxTec?

My Pro1 is running happily again with a brand new display I finally got from FxTec, but thanks anyway! 🙂

Was it tested on LineageOS 18.1?

Thank you for posting. The instructions are in Chinese 🙁

Either this or someone (FxTec maybe) will be selling a working replacement screen 😜

Still, my data will be lost. In such case, I will endure the annoyance of broken screen for now and wait for some less invasive solution to this problem

So there is no solution currently? Either broken screen (which is annoying, but bearable) or flashing to stock? I prefere to be sure before I remove my old screen.

I finally got mine replacement screen from Aliexpress https://www.aliexpress.com/item/32956500815.html?spm=a2g0o.store_pc_home.productList_5428177.pic_4 What exactly is this firmware problem mentioned somewhere above? I am on LineageOS 18.1 - will upgrading to 19.1 help me in any way?