Leaderboard

This kind of charging problem exists for me since several months but I have noticed its cause is my worn USB connector. I did not use magnetic connector but I have found last year that only one direction works reliable for me... closer to the end of last year, I had problems with both directions... I have started to use a magnetic end but it did not look to be reliable from start because of my worn connector, so I have started to twist in one or other direction to have a mostly reliable charging... now I have reached a state where I starting to switch magnetic and normal cable as non

That board will be definitively somewhat different as they wrote in one of their update that they had to modify it because of some radio/reception problems... However, I don't know how it affects Pro1. Generally, I would think the new board may have the very same fixing and conection, but it would be good to know what was the problem with original board and how it may work (better or worse) if it was installed in Pro1. For example, it may have a charging controller which has some noise what causes problems at some bands of the SDM662-related board... but we know nothing about it.

@EskeRahn I tried pressurized air, but to no avail... Both the USB socket and the magnet adapter seem clean... @VaZso Sounds very similar to how my issue developed over the last few months. Mine is still in the state that charging is mostly reliable (although sometimes varying in current...) once it has started, as long as I don't touch the phone... I wonder whether the Pro1X might still have the same connector board, which would increase the dim chance to ever get such a thing from Fxtec as a spare part... My soldering skills wouldn't be up to the task of replacing the connector on

Using magnetic adapters my self, you might try to take a magnifying glass and see if some ferromagnetic dirt might have crept in, in either side. Normal dust from the garden soil can contain enough iron to cause issues, and can be quite hard to brush or blow away.

What ever it was, it fixed it self about 3d after install.... See this collage of roughly 2x5 days stitched together. (So must have been an app-issue, or net glitch after all) Note the slope of the two added green lines. 10 percent point a day idle consummation is not bad. :)

On the Pro1 *#*#4636#*#*

By the way, regarding my several charging problems, new observations substantiate a suspicion that those cases in which my phone simply drops to 'discharging' and stays there are now caused by the USB socket slowly becoming unreliable, even though I've been using magnetic adapters all the time...