kelvin

I found that the official firmware in the pinned post may not be suitable for my phone. My model is pro1x, which was produced before it was discontinued. It has the same 1050 model as my friend’s other CPU model, but the cameras are different. Taking pictures is obviously different. It's good, so I downloaded the top post Release_SM6115_S701_V2.1.5_20220906-2009_user and used QFIL 9008 to flash the machine. I can flash it in, but I can't start it. I flashed the ROOT of LINEOAGES and I can start it, but there is no WIFI and sound. Is it official before the discontinuation of production? Small c

I found that the official firmware in the pinned post may not be suitable for my phone. My model is pro1x, which was produced before it was discontinued. It has the same 1050 model as my friend’s other CPU model, but the cameras are different. Taking pictures is obviously different. It's good, so I downloaded the top post Release_SM6115_S701_V2.1.5_20220906-2009_user and used QFIL 9008 to flash the machine. I can flash it in, but I can't start it. I flashed the ROOT of LINEOAGES and I can start it, but there is no WIFI and sound. Is it official before the discontinuation of production? Small c

The phone did not fall, but when I flashed it back to Android from Ubuntu, I found that the available space was only 8GB. I thought there was something wrong. It was QFIL that wiped the hard disk. During the process, I canceled the operation and then flashed the phone again and the problem appeared. This is the problem.

I encountered the same problem as you and wanted to fix it through your method, but your backup file cannot be downloaded. Can you send another one?

There are no errors in QFIL flashing, and the flashing can be completed normally, but it just cannot be started. The problem is as mentioned in my post above.

My mobile phone is PRO1X. You are right. After using QFIL to flash the official firmware in 9008 mode, it will not enter the system. It jumps to 900E mode after 20 seconds. If I flash the lineageos system, the same version of BOOT.IMG will not enter. To start, you can only enter the lineage system by flashing a different version of boot.img, but there is no wifi and sound, and everything else is normal. What is the reason for this? Help.

After flashing the machine with 9008, enter the bootloader interface. As shown in the picture, the bootloader version and baseband version are both blank. After flashing the official firmware, it cannot be started. Is there any solution? Someone help me.

I contacted [email protected] and their response was I came here for help and I'm really speechless, what product is this selling? Now my phone has been flashed with the official firmware using 9008, and after turning on the phone, the screen will go black and enter 900E mode after waiting for 10 seconds. I have re-flashed the phone dozens of times, and the situation is the same. It is the same whether it is firmware with or without GMS.

My situation is the same as yours, did you solve it later? If it's solved, can you tell me how? Thanks.

My phone was flashed with Ubuntu Touch and then I tried to flash it back to the Android system, but my computer crashed during the process. Now, I have used the 9008 method to flash the official package back to the original system, but I panicked when I saw that the available space was only 8GB, so I flashed it again. This time, I selected some options on QFIL that I shouldn't have, including the option to clear all partitions. During the process, the computer froze, and after I forcefully shut it down, it turned into its current state. Now, the situation is that it boots to the Android logo s

1.Open the terminal and run the command to edit the `logind.conf` file: sudo nano /etc/systemd/logind.conf 2.Find this value and modify it to, be careful not to remove #. HandleLidSwitch=ignore 3.Finally, apply the changes by running: systemctl restart systemd-logind.service 4.restart cellphone Before starting, please modify the permissions of logind.conf to read and write.