JJB 24 Posted July 8 Author Share Posted July 8 Will check for more devices. Quote Link to post Share on other sites
Kilrah 11 Posted July 8 Share Posted July 8 (edited) Decided to try lineage, turns out UT installer didn't work because I had the adb driver but not the bootloader one, SDIO found a Panasonic driver that was compatible and works, here's a copy here. https://fileshare.kilrah.xyz/s/U0NjYwM Edited July 8 by Kilrah Quote Link to post Share on other sites
JJB 24 Posted July 8 Author Share Posted July 8 Used a Win 10 tablet now. Pluging in the device shows the Qx1050 in device manager instantly, no need for driver updates. Copied files and linked path, run "adb devices" command and everything seem working. Sideload passed on the second attempt as on the first one it told me the recovery file is corrupted and system cannot reboot anymore. But I just redid the wipe and install. Gonna test now. 2 Quote Link to post Share on other sites
chrissv 7 Posted July 8 Share Posted July 8 7 hours ago, EskeRahn said: Also remember that both ports and cables can be problematic with fastboot on newer PC's Meanwhile, I never ran into these kinds of problems on my Linux machine (Debian 11 or 12). Always just plugged in a USB-C to USB-C cable (or Micro-USb gor older devices), so this problem might be Windows-specific (unless I just got really really lucky, for once 🙃). Quote Link to post Share on other sites
EskeRahn 5,421 Posted July 8 Share Posted July 8 38 minutes ago, chrissv said: ...so this problem might be Windows-specific´... Quite possible, it could be some ever so slightly different handling of some handshaking (or lack of handshaking?) At first I thought it was USB3.0 that was the problem, as USB2.0 seem to 'always' work. But it is more complex than that, as it works just fine with USB3.0 from the Thunderbolt4.0 hub. My guess is that the presence of a hub adds ever so slightly to the latency, and it just MIGHT be that the Linux driver has ever so slightly longer latency build in. Quote Link to post Share on other sites
JJB 24 Posted July 8 Author Share Posted July 8 For my case it looked like a drivers issue, as those manual additions did not seem to work well. If the devices register and install themselves, things seem a bit more smooth. 1 Quote Link to post Share on other sites
JJB 24 Posted July 8 Author Share Posted July 8 What worked for me now: - Installing adb and fastboot (partially as no FxTec USB Drivers available) https://wiki.lineageos.org/adb_fastboot_guide - ADB driver install (probably no effect) https://adb.clockworkmod.com/ - Reboot into bootloader mode With the device powered off, hold Volume Down + Power Enter recovera with Volume Up + Power - Enable offline charging fastboot oem enable-charger-screen fastboot oem off-mode-charge 1 fastboot reboot - Unlocking the bootloader (skipped as already by default) fastboot flashing unlock - Flashing additional partitions additional partitions to be flashed for recovery to work properly fastboot flash dtbo dtbo.img - Installing Lineage Recovery using fastboot Other recoveries may not work for installation or updates. fastboot flash recovery recovery.img - Installing LineageOS from recovery Factory Reset, then Format data / factory reset and continue with the formatting process adb -d sideload filename.zip - Installing Add-Ons (skipped as no GApps added) Apply Update Apply from ADB adb -d sideload filename.zip (for all packages) - Reboot system now Using Pro1X shipped with Stock Android connected to Win7 and Win10. 1 2 Quote Link to post Share on other sites
JJB 24 Posted July 8 Author Share Posted July 8 Thanks guys for your support. Those last days were exhausting. Wouldn't make it without you. 2 1 Quote Link to post Share on other sites
JJB 24 Posted July 8 Author Share Posted July 8 Next up I will check that F-Droid stuff and app stores 😅 1 Quote Link to post Share on other sites
claude0001 1,315 Posted July 8 Share Posted July 8 (edited) 3 hours ago, JJB said: Next up I will check that F-Droid stuff and app stores Depending on your needs, you might want to add the Izzy repository to F-Droid. It has a lot of interesting open-source stuff that does not (yet) meet the acceptance criteria for the official F-Droid repo. Aurora Store is what you want to be able to install (free) software from the Google Appstore. Some apps (e.g. official Firefox) are not on F-Droid, despite being open source ... Congrats on getting things going at last! Edited July 8 by claude0001 Quote Link to post Share on other sites
Hook 2,940 Posted July 8 Share Posted July 8 4 hours ago, JJB said: Thanks guys for your support. Those last days were exhausting. Wouldn't make it without you. So glad it worked out finally. I will say, this stuff is tricky on Windows (and I am mostly a Windows user), However, I have an old Thinkpad that I installed Manjaro on. All the fastboot and adb tools were already installed and doing all this stuff just works smoothly. I now exclusively use that Linux laptop for doing this even though I am not all that skilled with Linux (luckily have a couple of knowledgeable friends that give me support). I don't know why it's such a hassle with Windows, but it always is and I can no longer imagine doing fastboot and adb without Linux. The ironic thing is I don't use my Linux laptop for much else except to ssh into my friend's Linux server and irc. Lol. 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.