fredrick 36 Posted February 2, 2020 Share Posted February 2, 2020 just wanted too keep this thread alive. got my phone earlier this week. looking forward to seeing the swedish letters on a replacement part keyboard soon. 🙂 Quote Link to post Share on other sites
EskeRahn 5,460 Posted February 2, 2020 Share Posted February 2, 2020 6 hours ago, sdx said: As a frequent typer of Swedish, I can positively say that DE QWERTZ physical layout is "good enough" with Finqwerty. I'm sure I would be almost equally bothered to see non-swedish ÅÄÖ on the keyboard. And to make one swedish/finnish and one danish/norwegian would probably not be financially viable. ...And unfortunately the standard Danish ÆØ is swapped from the Norwegian, so for either however it is printed will be wrong for the other... 😥 Quote Link to post Share on other sites
FlyingAntero 871 Posted February 3, 2020 Share Posted February 3, 2020 On 2/2/2020 at 7:11 AM, sdx said: As a frequent typer of Swedish, I can positively say that DE QWERTZ physical layout is "good enough" with Finqwerty. I'm sure I would be almost equally bothered to see non-swedish ÅÄÖ on the keyboard. And to make one swedish/finnish and one danish/norwegian would probably not be financially viable. I am also very happy with my QWERTZ unit running FinQWERTY (Finnish). There are only few buttons that needs to be swapped by software. Y<->Z, Ü->Å, ß->+ +->' Personally, I wouldn't have changed + character by software at all but current layout is fine. However, some of my friends are waiting for information about Scandic. Would be good to share if Scandic is still in the pipeline or should people just buy QWERTZ and use FinQwerty. I would definitely buy a spare part Scandic layout mat to myself and maybe considering selling current unit to buy Scandic from stock availability. 1 Quote Link to post Share on other sites
EskeRahn 5,460 Posted February 3, 2020 Share Posted February 3, 2020 38 minutes ago, FlyingAntero said: I am also very happy with my QWERTZ unit running FinQWERTY (Finnish). There are only few buttons that needs to be swapped by software. Y<->Z, Ü->Å, ß->+ +->' Personally, I wouldn't have changed + character by software at all but current layout is fine. However, some of my friends are waiting for information about Scandic. Would be good to share if Scandic is still in the pipeline or should people just buy QWERTZ and use FinQwerty. I would definitely buy a spare part Scandic layout mat to myself and maybe considering selling current unit to buy Scandic from stock availability. I do not expect to here anything on the subject before general availability of the device. If a Scandic mat was available and easily user replaceable I would also buy some of them. But as I understand it, the keyboard is the only thing glued on, needing a heat gun. So not super user-replaceable, and I assume swapping it our selves would void the warranty... (Though I bought a heat gun for the purpose already....) 2 Quote Link to post Share on other sites
VaZso 1,998 Posted February 3, 2020 Share Posted February 3, 2020 7 hours ago, EskeRahn said: I do not expect to here anything on the subject before general availability of the device. If a Scandic mat was available and easily user replaceable I would also buy some of them. But as I understand it, the keyboard is the only thing glued on, needing a heat gun. So not super user-replaceable, and I assume swapping it our selves would void the warranty... (Though I bought a heat gun for the purpose already....) Anyway, I have used my heat gun to perfectly remove the sticker on the back before it is worn out. 🙂 It is a good thing to have if you would like to remove glued parts anyway. 1 Quote Link to post Share on other sites
wapsi 8 Posted February 3, 2020 Share Posted February 3, 2020 7 minutes ago, VaZso said: Anyway, I have used my heat gun to perfectly remove the sticker on the back before it is worn out. 🙂 It is a good thing to have if you would like to remove glued parts anyway. Wait, do you mean you've somehow detached the keycap sticker of Pro1's keyboard and maybe change the location? Quote Link to post Share on other sites
FlyingAntero 871 Posted February 4, 2020 Share Posted February 4, 2020 (edited) 12 hours ago, wapsi said: Wait, do you mean you've somehow detached the keycap sticker of Pro1's keyboard and maybe change the location? I believe that @VaZso was talking about the sticker in the back. Keyboard layout seems to be a mat that is glued somehow. See these pictures. However, we have seen a faulty unit where one key was rotated. I don't if the key was printed upside down or is it possible to remove individual key. Edited February 4, 2020 by FlyingAntero I messed up the spoiler tag 1 Quote Link to post Share on other sites
VaZso 1,998 Posted February 4, 2020 Share Posted February 4, 2020 1 hour ago, FlyingAntero said: I believe that @VaZso was talking about the sticker in the back. Correct. 1 Quote Link to post Share on other sites
raphaelcno 21 Posted February 4, 2020 Share Posted February 4, 2020 On 1/25/2020 at 8:22 AM, MortisAngelus said: Hello, @waxberry Now a few months later I return with my question: any new info about if/when a scandi layout could be expected? Or should I just get a QWERTZ version? Albeit I really would not like to. The more and more time that goes by, the less sense the already high price makes... We are now essentially paying 650+€ for 3 year old tech apart from camera, RAM and keyboard... At this point in time, it feels like I will get a Pro² before there is a scandi pro¹ I'm not sure if you will get any official answer here, so you should send an e-mail to info@fxtec.com. I received an answer, but I'm not allowed to share it "without a written consent of the sender" . Quote Link to post Share on other sites
painkiller 0 Posted April 1, 2020 Share Posted April 1, 2020 Sound good and hopefully we will get it soon, as I'm holding my trigger on buy button until scandic version of keyboard is available. Quote Link to post Share on other sites
fredrick 36 Posted May 11, 2020 Share Posted May 11, 2020 (edited) +1 for the scandi (swedish) layout. (I would like to buy the part and install it myself though, since I already have the qwerty version) Edited May 11, 2020 by fredrick 1 Quote Link to post Share on other sites
raphaelcno 21 Posted October 27, 2020 Share Posted October 27, 2020 Nice to see that the Scandinavian layout is present on the Indiegogo page for the Pro1-X (https://www.indiegogo.com/projects/pro1-x-smartphone-functionality-choice-control#/). 😀 I just see that "$" and "€" are still swapped on the Scandinavian layout: Is there a particular reason why they are not located the same way as on the QWERTZ layout? 2 Quote Link to post Share on other sites
fredrick 36 Posted August 9, 2021 Share Posted August 9, 2021 On 5/11/2020 at 1:18 PM, fredrick said: +1 for the scandi (swedish) layout. (I would like to buy the part and install it myself though, since I already have the qwerty version) I'd like to buy this now please. 🙂 Still ve-ery interested! 2 Quote Link to post Share on other sites
pebert 98 Posted August 11, 2021 Share Posted August 11, 2021 On 8/9/2021 at 3:53 PM, fredrick said: I'd like to buy this now please. 🙂 Still ve-ery interested! Also very eager to have it. 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.