Laska 41 Posted March 17 Share Posted March 17 23 minutes ago, claude0001 said: Hi @Laska, The keyboard driver for the Pro1 has been completely rewritten by @tdm when he did the original port of LineageOS. The keymap file in LOS 16 is located in /sys/bus/i2c/drivers/aw9523b/6-0058/keymap. However, any changes to that file are not persistent across reboots. If you have root, the easiest way to make changes persistent is the following: Install the app Run Userinit from F-Droid. Execute Run-Userinit once and grant it root privilege. Next, place your modified keymap e.g. in /data/system/keyboard/keymap (you may have to create the "keyboard" folder first). Put an executable script named e.g. 01_install_keymap_mod.sh into /data/local/userinit.d/, with the following content: #!/system/bin/sh # cp /data/system/keyboard/keymap /sys/bus/i2c/drivers/aw9523b/6-0058/ Now Run-Userinit should take care of overwriting the default keymap with your modified one at every boot. Note that @tdm had actually intended keyboard modding to be more user-friendly. On the "keyboard" panel in Settings, you'll find an option named "Custom keymap" that should have automated copying of the keymap, as done above by our script. Unfortunately, the function got broken somewhere along the way after LOS 16 had become official, and was finally fixed only in LOS 18.1. As further changes to keyboard handling had already been introduced add that point, backporting the patch to LOS16 seemed no longer trivial and I did not try it. If possible, get root for your LOS16 (I miss addonsu ...) and use the above boot-script method for automating this. Yes, I'm rooted with Magisk so I think I can put scrpt in post-fs or service.d folder. But I don't understand content of this file -this is not lookng like .kl type file and I don't know how to remap keyboard with those codes. Quote Link to post Share on other sites
claude0001 1,340 Posted March 18 Share Posted March 18 (edited) 51 minutes ago, Laska said: But I don't understand content of this file -this is not lookng like .kl type file and I don't know how to remap keyboard with those codes @tdm's driver unfortunately does not come with much documentation outside the source code itself. @Sean McCreary has summarized things in a way I could not best: https://community.fxtec.com/topic/3347-how-to-customize-the-keyboard-layout-on-lineageos-181/?do=findComment&comment=57526 In short: The first column of the keymap is a decimal "key-number" specific to @tdm's driver. The next two columns are the hexadecimal Linux (not Android!) input codes to be generated by that key, either when pressed alone (second column), or together with the "Fn" (yellow arrow) modifier (third column). Edited March 18 by claude0001 2 Quote Link to post Share on other sites
Laska 41 Posted March 23 Share Posted March 23 So after some struggle I've returned to stock. After degoogle it's not bad, it's very fast and clean. And I can confirm now: time resets not happening on stock, even without SIM or any data connection. I've also checked it with my LG V50 -same thing, time and date is always correct. The one problem with stock rom is audio recording, no matter if it's on video ir in only voice in dictaphone app, the sound have cutted higher frequencies. Is there any fix for this? I'm ofcourse rooted. Quote Link to post Share on other sites
claude0001 1,340 Posted March 28 Share Posted March 28 Despite my previously announcing the opposite, I did it again. Here are updated builds of good-old LineageOS 16.0 for the SD835 Pro1 (QX1000): https://findus.zwergenschaenke.net/~puma/linux.html#lineagepro1 The ROM dated "20240327" gives you all backported ASB fixes up to March 2024. As always, my build includes some local modifications specific to the Pro1, as documented in the patch tarball. These have not changed since last year. Credit goes to @Laska for getting me to fire up my old Pro1 again. This made me realise how much LOS 16 was better suited for my use-case compared to recent versions of Android. In consequence, I bought another Pro1 (without defective keyboard) and plan to continue using it with LOS 16 for some time to come. I'll continue to make updated builds with backported ASB patches as long as possible and make them available on my website above. However, considering that this forum is no longer publicly accessible (which is a pity), I doubt that it makes much sense to announce new builds here any more. Anyone knows what is the best place to publish information on the Pro1/Pro1-X now? 1 4 Quote Link to post Share on other sites
Laska 41 Posted March 28 Share Posted March 28 22 minutes ago, claude0001 said: Despite my previously announcing the opposite, I did it again. Here are updated builds of good-old LineageOS 16.0 for the SD835 Pro1 (QX1000): https://findus.zwergenschaenke.net/~puma/linux.html#lineagepro1 The ROM dated "20240327" gives you all backported ASB fixes up to March 2024. As always, my build includes some local modifications specific to the Pro1, as documented in the patch tarball. These have not changed since last year. Credit goes to @Laska for getting me to fire up my old Pro1 again. This made me realise how much LOS 16 was better suited for my use-case compared to recent versions of Android. In consequence, I bought another Pro1 (without defective keyboard) and plan to continue using it with LOS 16 for some time to come. I'll continue to make updated builds with backported ASB patches as long as possible and make them available on my website above. However, considering that this forum is no longer publicly accessible (which is a pity), I doubt that it makes much sense to announce new builds here any more. Anyone knows what is the best place to publish information on the Pro1/Pro1-X now? We all shall to thank you. As I wrote before, Android 9 is last OS without major compromises. I like your website very much, it have some ineresting readings. Yes, I was suprised that without log-in one can not view this forum. Maybe XDA is the place? Quote Link to post Share on other sites
Laska 41 Posted March 28 Share Posted March 28 According to my previous question, how can I make audio recordings on Pro1 not so horrible and cut-off? Quote Link to post Share on other sites
claude0001 1,340 Posted March 29 Share Posted March 29 18 hours ago, Laska said: According to my previous question, how can I make audio recordings on Pro1 not so horrible and cut-off? There is a long thread about this: https://community.fxtec.com/topic/3427-sound-problems-with-no-response-from-fxtec-support-for-45-days-pre-christmas-device/?tab=comments#comment-59239 Unfortunately with no satisfactory solution. The Pro1 applies some aggressive filtering on the built-in mics that seemingly cannot be disabled. You get best results by using a USB microphone or by recording from the 3.5 mm jack. In the latter case, make sure to disable NFC during recording. It will otherwise introduce a low-amplitude, but clearly audible, "clicking" background. 2 Quote Link to post Share on other sites
claude0001 1,340 Posted May 15 Share Posted May 15 For the few remaining fans of Pie, I have just uploaded a new build of my unofficial LineageOS 16.0 for Pro1 (SDS835). At http://findus.zwergenschaenke.net/~puma/linux.html#lineagepro1 go for the ROM dated "20240515". After many months of near-inactivity on my side, this build again introduces significant improvements (or so I think). As usual, it gives you security patches backported from the ASB up to May 2024. Beyond that, I finally upgraded the bundled version of WebView -- which had not been updated in 2 years -- to Chromium 124.0.636.82 (the version used by recent LOS 21). I also updated the graphics stack to the level of LOS21 (which uses the blobs from the OnePlus 5T). This bumps the OpenGL ES 3.2 subversion from 331.0 to 415.0. As usual, all my modding with respect to the official LOS16 tree is documented at the link above. Have fun. 3 1 Quote Link to post Share on other sites
claude0001 1,340 Posted June 20 Share Posted June 20 I've uploaded my latest build of LineageOS 16.0 for Pro1 (SD835) at: http://findus.zwergenschaenke.net/~puma/linux.html#lineagepro1 Go for the ROM dated "20240620". Changes since last month: Include backported Android security patches up to the June 2024 ASB. Update bundled version of WebView to Chromium 125.0.6422.165. As usual, the full patchlog with respect to the unmodified, official LOS 16.0 tree is available at the link above. Have fun. 3 1 Quote Link to post Share on other sites
claude0001 1,340 Posted August 7 Share Posted August 7 I've uploaded my latest build of LineageOS 16.0 for OG Pro1 (SD835) to https://findus.zwergenschaenke.net/~puma/linux.html#lineagepro1 The ROM dated "20240807" gives you backported Android security patches up to the July 2024 ASB. There are no other changes since last time. The full patchlog, documenting all my changes relative to unmodified LOS 16.0 is also available, as usual. Have fun. 3 Quote Link to post Share on other sites
claude0001 1,340 Posted August 21 Share Posted August 21 (edited) I've just uploaded my latest build of LineageOS16.0 (for SD835 Pro1), dated 20240820, to https://findus.zwergenschaenke.net/~puma/linux.html#lineagepro1 Changes since last month: Includes backported security patches up to the August 2024 Android Security Bulletins. Updates the bundled system WebView to Chromium 127.0.6533.103 (as shipped with official LOS 20 and 21). Have a lot of fun! Edited August 21 by claude0001 2 1 Quote Link to post Share on other sites
claude0001 1,340 Posted September 24 Share Posted September 24 The latest build of LineageOS16.0 (for SD835 Pro1), dated 20240924, is available at https://findus.zwergenschaenke.net/~puma/linux.html#lineagepro1 (Kind of) full list of features: Backported security patches up to the September 2024 ASB. Improved keyboard behaviour (backported from later LOS releases) as documented in the local patch tarball. Several more improvements with respect to the upstream LOS 16 tree (GPS fix, touchscreen margin control, ...) as documented in that same patch tarball. Updated graphics driver stack (from LOS21). Update of the bundled System WebView and browser to Chromium 128.0.6613.88 (from LOS21). Have a lot of fun! 4 Quote Link to post Share on other sites
claude0001 1,340 Posted October 17 Share Posted October 17 The October build of LineageOS16.0 (for SD835 Pro1) is available. Head to https://findus.zwergenschaenke.net/~puma/linux.html#lineagepro1 and get the ROM dated 20241017. Changes since last month: Backported security fixes up to the October 2024 ASB. Update of the bundled System WebView and browser to Chromium 129.0.6668.70 (from LOS21). Have a lot of fun! 1 1 Quote Link to post Share on other sites
diejuse 0 Posted October 22 Share Posted October 22 Can you expla On 10/17/2024 at 7:47 PM, claude0001 said: The October build of LineageOS16.0 (for SD835 Pro1) is available. Head to https://findus.zwergenschaenke.net/~puma/linux.html#lineagepro1 and get the ROM dated 20241017. Changes since last month: Backported security fixes up to the October 2024 ASB. Update of the bundled System WebView and browser to Chromium 129.0.6668.70 (from LOS21). Have a lot of fun! Can you explain how Devuan is implemented and displayed? Using Termux-X11 or XSDL Xserver? Or only terminal like Termux? Quote Link to post Share on other sites
claude0001 1,340 Posted October 25 Share Posted October 25 On 10/23/2024 at 1:06 AM, diejuse said: Can you explain how Devuan is implemented and displayed? Using Termux-X11 or XSDL Xserver? Or only terminal like Termux? Note that the GNU/Devuan system is not part of the ROM as offered for download above. You'll have to set that up yourself. That being said, I still use that same Debian/Devuan setup I once described in this thread: It does not rely on Termux or any similar App-based solution. Rather, it runs in a native (rooted) chroot of LineageOS and starts in parallel to that upon boot. This is done via a Userinit script which you can download from that other post above for reference. All this relies on the native AddonSU root-management solution of LOS16, though you can certainly achieve the same thing via Magisk. AddonSU and native access to the SD-card are the main reasons why I'm still sticking to ancient LOS 16. My GNU/Linux setup is unusual in that I run the X11 server (Xorg) inside the chroot, and just connect to it via XRDP. This works both remotely from a PC (giving you kind of a "convergence" experience) or locally from any Android RDP-viewer App running on the phone itself. Not relying on any Android X11-server makes sure you do not accidentally kill all your Linux programs by inadvertently closing that XServer-App. Also, XRDP makes sure the desktop environment is loaded only when needed, and does not eat up RAM all the time. For most use cases one can just access the Linux CLI in text-only mode (via some SSH client). 1 Quote Link to post Share on other sites
claude0001 1,340 Posted 19 hours ago Share Posted 19 hours ago (edited) Newest unofficial LineageOS16.0 (for SD835 Pro1) is available. At https://findus.zwergenschaenke.net/~puma/linux.html#lineagepro1 get the ROM dated 20241116. Changes since last month: Backported security fixes up to the "1 November 2024" ASB. Update system webview and browser to Chromium 130.0.6723.73. Have fun. Edited 19 hours ago by claude0001 3 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.