sequestris 710 Posted January 30, 2023 Share Posted January 30, 2023 I haven't vetted it yet.@EskeRahn can you put this somewhere appropriate?FXtec Phone Case 1 Quote Link to post Share on other sites
jakfish 133 Posted January 30, 2023 Share Posted January 30, 2023 Intriguing, but its demo is a simple slab phone (iphone?) How would its physical setup work for a slider? Quote Link to post Share on other sites
sequestris 710 Posted January 30, 2023 Author Share Posted January 30, 2023 Not sure. But I figure if the dimensions are right then cutting out holes would be simple enough. Quote Link to post Share on other sites
EskeRahn 5,460 Posted January 30, 2023 Share Posted January 30, 2023 41 minutes ago, jakfish said: Intriguing, but its demo is a simple slab phone (iphone?) How would its physical setup work for a slider? Flip cases works just fine, see e.g. https://eskerahn.dk/?p=3620 on how to modify cases yourself and exampless with flip cases 1 Quote Link to post Share on other sites
jakfish 133 Posted January 30, 2023 Share Posted January 30, 2023 🙂 Your page has already been indispensable in guiding me through the choice and hole-making of Huawei clear case. Thank you for the time and all your experimenting. I just went ahead and ordered the one cited in this thread, just to see. Beside, seller was giving 33 cents off original price. I can't resist a sale. 1 1 Quote Link to post Share on other sites
sequestris 710 Posted January 30, 2023 Author Share Posted January 30, 2023 OOh. Prime. Will have tomorrow.https://www.amazon.com/gp/product/B0BG28XJK8/ref=ox_sc_act_title_1?smid 1 Quote Link to post Share on other sites
Hook 3,020 Posted January 30, 2023 Share Posted January 30, 2023 This is like the AlieExpress merchant who figured out that the Elephone U Pro screen could be used for the F(x) Tec Pro 1 and relabeled the screen (and, then, in this case, jacked up the price-- you can get Elephone U Pro screens much cheaper on Alie Express). 😄 https://www.aliexpress.us/item/3256804530146022.html?gatewayAdapt=deu2usa4itemAdapt&_randl_shipto=US 2 Quote Link to post Share on other sites
jakfish 133 Posted January 30, 2023 Share Posted January 30, 2023 I'm trying to envision the geography of these cases that open left-to-right. It seems that most controls are on the right side of the phone, so that would circumvent a lot of cutting. Hole for the camera would obviously need addressing. The potential rub: if the phone is physically attached to the case, the kb opens on the left, meaning the case's credit card side could get in the way of typing, unless the credit card side folded under everything somehow. Or perhaps you don't physically attach the case (though the manufacturer in this thread suggests that you do). Or perhaps there's a way to reverse the portrait viewing, allowing the kb to open from the right. But at least in stock Android, portrait seems stuck in one direction only. @sequestris -- nice find. 1 Quote Link to post Share on other sites
claude0001 1,341 Posted January 30, 2023 Share Posted January 30, 2023 Looking at the pictures, its camera aperture does not seem to be low enough to accommodate the Pro1-X's lens. And certainly not its flash LED. Wouldn't recommend. Quote Link to post Share on other sites
EskeRahn 5,460 Posted January 30, 2023 Share Posted January 30, 2023 Just checked... Would have bought one, but the interest have been so massive that they sold out.... 😁 Quote Link to post Share on other sites
EskeRahn 5,460 Posted January 30, 2023 Share Posted January 30, 2023 Just now, claude0001 said: Looking at the pictures, its camera aperture does not seem to be low enough to accommodate the Pro1-X's lens. And certainly not its flash LED. Wouldn't recommend. The pictures in this kind of listings are usually generic with 'some' phones, the last looks like an Iphone e.g. But what they actually sell could fit well. Quote Link to post Share on other sites
EskeRahn 5,460 Posted January 30, 2023 Share Posted January 30, 2023 1 hour ago, jakfish said: I'm trying to envision the geography of these cases that open left-to-right. It seems that most controls are on the right side of the phone, so that would circumvent a lot of cutting. Hole for the camera would obviously need addressing. Exactly. for an example, i made a slo-mo video that I put here:https://community.fxtec.com/topic/2681-how-to-openshut-the-pro1pro1x/?tab=comments#comment-42061 Note that flip-cases come in several variants, of the simple one with a magnetic clasp, there are two. The one in the OP with a long 'latch', and the one with two short latches that meet at the side (like in the video) 1 Quote Link to post Share on other sites
claude0001 1,341 Posted January 30, 2023 Share Posted January 30, 2023 @EskeRahn Maybe you're right and I am too negative. But for me it's listed as "currently unavailable" anyway, so ... Quote Link to post Share on other sites
Tim6263 134 Posted January 30, 2023 Share Posted January 30, 2023 1 minute ago, claude0001 said: @EskeRahn Maybe you're right and I am too negative. But for me it's listed as "currently unavailable" anyway, so ... Likewise for me (in UK) too Quote Link to post Share on other sites
EskeRahn 5,460 Posted January 30, 2023 Share Posted January 30, 2023 2 minutes ago, claude0001 said: @EskeRahn Maybe you're right and I am too negative. But for me it's listed as "currently unavailable" anyway, so ... Yes and that could well indicate that it is not just a 100% generic one. 😉 Quote Link to post Share on other sites
jakfish 133 Posted January 30, 2023 Share Posted January 30, 2023 @EskeRahn -- your custom flip cases seem to be designed so the kb extends to the right of of the case, allowing the credit card side of the case to lie behind the phone. That makes the best sense, but how do you address the need for reverse portrait (otherwise, when you open the case, the portrait screen is upside down)? Or are you working with an OS that allows auto-rotate to reverse portrait? Or do I have my geography completely wrong? 🙂 Quote Link to post Share on other sites
EskeRahn 5,460 Posted January 30, 2023 Share Posted January 30, 2023 20 minutes ago, jakfish said: @EskeRahn -- your custom flip cases seem to be designed so the kb extends to the right of of the case, allowing the credit card side of the case to lie behind the phone. That makes the best sense, but how do you address the need for reverse portrait (otherwise, when you open the case, the portrait screen is upside down)? Or are you working with an OS that allows auto-rotate to reverse portrait? Or do I have my geography completely wrong? 🙂 The flap goes under the screen when opened. In portrait I open the flap like e.g. a Manga or a Quran. So the button are protected when the flap is closed. BUT that means that you will either have to make a hole for the camera OR fold the flap all the way over for taking a photo. I keep the inner shell of a P20 pro flipcase with the camerahole at the top, bt remove the whole flap, so it is glued on the other way. Let me do a few photos, just a sec.... Add: And yes, some of the cases i got are made with more care than other - this one so sloppy that I even forgot the hole over the secondary microphone - though I did do the v-cut for it....in the inner shell... 1 Quote Link to post Share on other sites
jakfish 133 Posted January 30, 2023 Share Posted January 30, 2023 >> So the button are protected when the flap is closed. << Okay, I understand now. You could do it vice-versa, less holes to cut, but exposed button. Got it. 1 Quote Link to post Share on other sites
EskeRahn 5,460 Posted January 30, 2023 Share Posted January 30, 2023 5 minutes ago, jakfish said: >> So the button are protected when the flap is closed. << Okay, I understand now. You could do it vice-versa, less holes to cut, but exposed button. Got it. Yup. But as I do not use the camera that often, I see it as an added benefit that the camera is protected when closed.... 1 Quote Link to post Share on other sites
jakfish 133 Posted January 30, 2023 Share Posted January 30, 2023 Very much appreciate the follow-up pics. You've made your work very clear. You should be selling on Amazon yourself. Quote Link to post Share on other sites
claude0001 1,341 Posted January 30, 2023 Share Posted January 30, 2023 1 hour ago, EskeRahn said: I see it as an added benefit that the camera is protected when closed... Not to disregard that it may work for some, but just my 2 cents to all others: Think about how often you use your phone's camera, for family pictures, barcode scanning and all that ... In many cases, a flip case that does not have the holes where they should be will not make you happy. Quote Link to post Share on other sites
jakfish 133 Posted January 30, 2023 Share Posted January 30, 2023 Apropos of custom cases, but not for the fxtex, this arrived today. Through a comedy of mailing errors, a fellow user on a handheld site received two and bequeathed one to me. It's custom-made for the HP 200LX. It must've cost a pretty penny. Wonder what price Aldona would charge for something custom for the phones here. Quote Link to post Share on other sites
EskeRahn 5,460 Posted January 31, 2023 Share Posted January 31, 2023 7 hours ago, claude0001 said: Not to disregard that it may work for some, but just my 2 cents to all others: Think about how often you use your phone's camera, for family pictures, barcode scanning and all that ... In many cases, a flip case that does not have the holes where they should be will not make you happy. It is quite easy to cut an additional hole for the camera, if the ease of use outweigh the need of protecting the lenses - to each their own. The best to use for round holes to look nice is to use a pipe of suitable size, like for making holes in leather. Do it from the front side to make the edges of the holes bend in nicely. The straight edges should be done with a chisel. A Stanley-knife can do, but is hard to control. Quote Link to post Share on other sites
sequestris 710 Posted January 31, 2023 Author Share Posted January 31, 2023 19 hours ago, jakfish said: I'm trying to envision the geography of these cases that open left-to-right. It seems that most controls are on the right side of the phone, so that would circumvent a lot of cutting. Hole for the camera would obviously need addressing. The potential rub: if the phone is physically attached to the case, the kb opens on the left, meaning the case's credit card side could get in the way of typing, unless the credit card side folded under everything somehow. Or perhaps you don't physically attach the case (though the manufacturer in this thread suggests that you do). Or perhaps there's a way to reverse the portrait viewing, allowing the kb to open from the right. But at least in stock Android, portrait seems stuck in one direction only. @sequestris -- nice find. Phone attached landscape Quote Link to post Share on other sites
sequestris 710 Posted January 31, 2023 Author Share Posted January 31, 2023 Phone attached Portrait Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.