kif 1 Posted December 9, 2023 Share Posted December 9, 2023 (edited) Hi I have recently replaced the screen with one found on Aliexpress, it works but now i have an unresponsive margin on both sides! On this forum I have seen that the problem was known on the Pro1 (see: Display units with large tap-insensitive margin), and the solution was to restore the stock android and boot, that should calibrate the digitizer. I have tried the same on my Pro1X, without any success! So: Does any one know how to calibrate the digitizer on pro1x? Thanks. Edited December 9, 2023 by kif Typos 1 Quote Link to post Share on other sites
Hook 3,020 Posted December 10, 2023 Share Posted December 10, 2023 1 hour ago, kif said: Hi I have recently replaced the screen with one found on Aliexpress, it works but now i have an unresponsive margin on both sides! On this forum I have seen that the problem was known on the Pro1 (see: Display units with large tap-insensitive margin), and the solution was to restore the stock android and boot, that should calibrate the digitizer. I have tried the same on my Pro1X, without any success! So: Does any one know how to calibrate the digitizer on pro1x? Thanks. The problem is the fix for the Pro1 was a patch from the Screen manufacturer that requires Android 10 or less. FxTec was able to incorporate that patch into their version of Android 9. Since the Pro1x starts with Android 11, there is no way to patch the Elephone U screens for the Pro1x. At this juncture, at least as far as I know, there is no fix until FxTec is able to provide replacement screens. 1 Quote Link to post Share on other sites
Hook 3,020 Posted December 10, 2023 Share Posted December 10, 2023 There is one rather insane possibility for anyone who has both a Pro 1 and a Pro1x... install the display first in the Pro1 (probably wouldn't have to even glue it) and flash the firmware of the screen. Then remove it from the Pro1 and install it on the Pro1x. I'm no expert and I'm just guessing, but would that work, I wonder. 2 Quote Link to post Share on other sites
Rob. S. 1,660 Posted December 10, 2023 Share Posted December 10, 2023 As bad as the situation is for @kif, this at least is a piece of information that was missing until now. I would have thought they'd have included that patch routine in the Pro1X stock ROM, too... And it is seems a good thing I didn't venture to replace my broken Pro1X screen with my the last Elephone replacement screen just yet... @Hook's recipe actually sounds like the one promising option that remains. Maybe someone with a Pro1 that's defective enough in other parts to still be useful could offer it as a service? 😉 I'm afraid I can't offer mine just yet as it is still kind of working and it has a brand-new display assembly from Fxtec I'd be rather reluctant to unglue... 2 Quote Link to post Share on other sites
Hook 3,020 Posted December 11, 2023 Share Posted December 11, 2023 8 hours ago, Rob. S. said: I would have thought they'd have included that patch routine in the Pro1X stock ROM, too... I'm not clear on this, but I think the patch to the firmware was intended for the Elephone U Pro and just plain doesn't work in anything higher than Android 10. I don't know what keeps the native Pro1 and Pro1x screens from having this problem... but whatever it is, it is not compatible with Elephone U Pro screens. I wonder if @Casey has any guidance on this matter? Quote Link to post Share on other sites
EskeRahn 5,460 Posted December 11, 2023 Share Posted December 11, 2023 4 hours ago, Hook said: I wonder if @Casey has any guidance on this matter? Yes! Would be wonderful if the patch could be isolated into something that could be executed simpler. For Pro1 as well as Pro1X. We have another thread on this somewhere, so the two threads ought to be merged Quote Link to post Share on other sites
CornholioGSM 338 Posted December 11, 2023 Share Posted December 11, 2023 ....idea....maybe test to patch display on old pro1 and then put it to 1X ? 1 Quote Link to post Share on other sites
CornholioGSM 338 Posted December 12, 2023 Share Posted December 12, 2023 I have now one pro1X for repair....and i have one old pro1 spare display...i will test it 🙂 2 4 Quote Link to post Share on other sites
kif 1 Posted December 13, 2023 Author Share Posted December 13, 2023 Hm too bad, it may be a goodbye to the Pro1x 😭 I have contacted the seller, they probably do not answer, but it is worth a try. Quote Link to post Share on other sites
CornholioGSM 338 Posted December 15, 2023 Share Posted December 15, 2023 Soo i can confirm, that display pulled from pro1 is fully working on pro1X...no margins no problems 🙂 3 4 Quote Link to post Share on other sites
Noir 112 Posted March 22 Share Posted March 22 On 12/10/2023 at 6:23 PM, Hook said: There is one rather insane possibility for anyone who has both a Pro 1 and a Pro1x... install the display first in the Pro1 (probably wouldn't have to even glue it) and flash the firmware of the screen. Then remove it from the Pro1 and install it on the Pro1x. I'm no expert and I'm just guessing, but would that work, I wonder. I can confirm this working. I am able to install the display driver on the replacement screen attached to my pro1 and then it is working as expected on the Pro1x. 5 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.