All Activity

Hmm I already did a very-long-power press deep boot, to no avail. I did not try the Power+VolDown hold, but did that just now, so will report back with any difference, though I highly doubt it. It seems like something with the significant motion detection not being deactivated when locked. Maybe some silly fitness crap that I forgot to disable, or the upgrade enabled??

I am actually seeing much better battery performance after the simulated battery pull. My Pro1x only dropped from my max of 85% to 77% in 7 hours, and my Pixel only dropped to 80% with quite a bit of use. I'll keep monitoring just to make sure I'm not jumping to conclusions, But I have to admit simulated battery pull is my go-to for weird stuff happening. However, now I need to try it with my Pro 1, which I haven't used much for a couple of weeks.

I can confirm the issue is their with yesterdays version also. 95% to 65% in just 4½h idle, screen off 'all' apps killed According to GSAM, it kept the Significant Motion Detector active for the full period, and I got no raise-to-wake or the like activated. ADD: 95% to 15% in just 13h !!! idle, screen off 'all' apps killed. When it has been recharged, I will turn it off and hope for better luck with next update... 😢

I think I am also seeing it on my Pro1x. I'm testing this week-end. But I also have been getting unusual battery drain on my Pixel 7 Pro. Coincidence? Or is the problem an Android 15 update problem and not a purely Lineage problem. I did a simulated battery pull on both devices (to clear out janky stuff going on and will watch both.

Lineage-22.2-20250426-nightly-pro1-signed.zip on April 5 (2025) security patch, installed smoothly using OTA. I can confirm the issue with the energy usage, since LOS 22.2

(lineage-22.2-20250426-nightly-pro1-signed.zip on April 5 security patch installed smoothly using adb sideload and MindTheGapps-15.0.0-arm64-20250214_082511) And we still can only select one keyboard layout, so no easy layout switching, for multilingual usage. Unfortunately I see no entries in the changelog that seems to address the power-wasting issue. But keep my fingers crossed...🤞

Interestingly, all reports OK here status.lineageos.org but still both manual download and OTA seems down?? Their recent history reports short bursts of outage, but is seems to have been continuously down for about a day. ...But strictly speaking you could say that it is not an outage as the page technically is answering It is just that it is not working and all direct device references go to the same page: Unable to contact upstream API ADD: They are back up 🙂

...And today download.lineageos.org/ seems down...

I was looking online, and guesstimating. There was a Moxee M2160 that looked similar, except for the charging connector being on the back of the case instead of at the bottom of the case. I might try to get a wallet case for that phone and see how close i get. Thank you for your reply!

Thank you for your reply and the kind offer! I ordered the Redmi Note 7 camera glass just now. I was guessing on the glass , perhaps Samsung A10? But now I will get the Redmi note 7 glass.

(The dotsrc.org mirror issue has been fixed)

I've 3d printed the hard case and glued it to a somewhat correct size leather case. There was a topic here somewhere that has a list of leather cases that fit the Pro1x dimension wise, though none just fit without tinkering with the case a bit.

I got it second hand. Was working - I was trying to flash the Ubuntu touch and it crashed during the flash. Sorry don't recall error. Was using UBPorts installer 😞

I don't know if I have a suggestion, but I suspect more information is needed. Is this a Pro1x that was formerly working ok and this just suddenly happened? Or did it do this when you got it. If the former, what kinds of things were you doing with the phone? Is it Stock Android or did you flash some other ROM? Anything you can tell people will help them decide if they know something you can try.

...glass over camera is just glued with good double side tape. If you want i can maybe sent you camera glass - but from Pro1 (notX) - so for double camera....but it is not problem i mean. ...if you want it then write me please tomorrow PM. BTW for protect camera glass buy tempered protection glass from ali - search for redmi note 7

Any suggestions?

What does everyone do with protecting their Pro 1x? My immediate question is actually, " how does one get their camera lens cover replaced..." because stupidly I dropped my phone twice in a day, and did not realize until the next day that the camera lens had cracked and a piece is actually gone (after I tried to tape over it, the tape lifted it off). So, as I felt really stupid for dropping the phone, I thought that if I HAD a protective case It might have been less damages done, but that I didn't have a case because it's a tricky phone for a case unless i had the skill to make one myself.

Same here for my 2nd of two Pro 1xs. Same amount, and had been promised that the Finance dept has my info and request for a refund instead.

I see a VERY horrible stamina after the 22.2 updates!!! It usually last for about four days on a charge, now it depletes over night (95% to 23% in 14 hours while idle on a table with display off, AND all user apps killed with Greenify as usual) It MIGHT be related to "Significant motion detector", But I would strongly recommend to avoid upgrading currently.

Maybe they use different regional mirrors, but it does not work here from their official site, that points to https://mirrorbits.lineageos.org/full/pro1/20250419/lineage-22.2-20250419-nightly-pro1-signed.zip that then reroutes to thepage that is (still) down

Another initial review of the phone: https://www.youtube.com/watch?v=FhonZR9VfJo The very pleasant, sympathetic-to-the-cause reviewer takes a philosophical approach in the video. I wish he had delved more into the hardware (mp3 playing, different rendering of browsed sites, etc), and I wish he tested a couple of third-party apps (eg TextMaker). In his defense, he said his reactions were just preliminary and more to come.

I don't really understand what mirrorbits is or what it's advantages are (even after reading their Github, lol), but Saturday's Pro1 update downloads just fine from the official Lineage download sites. Just FYI for folks.

As the download is still unavailable I did an OTA that WAS available. So now on lineage-22.2-20250419-nightly-pro1-signed.zip on April 5 security patch

Lineage-22.2-20250419-nightly-pro1-signed.zip on April 5 (2025) security patch, installed smoothly using OTA