Craig 1,435 Posted March 2, 2020 Author Share Posted March 2, 2020 Just a note, if you're installing Magisk on LIneage, you don't need to go to all this effort. Just use lineageos recovery to adb sideload it. 1 2 Quote Link to post Share on other sites
Laska 41 Posted March 5, 2020 Share Posted March 5, 2020 7 minutes ago, EskeRahn said: I have no idea... Sorry I'm little worried... Quote Link to post Share on other sites
Laska 41 Posted March 5, 2020 Share Posted March 5, 2020 Does anyone update with magisk root? Quote Link to post Share on other sites
david 929 Posted March 5, 2020 Share Posted March 5, 2020 6 minutes ago, Laska said: Does anyone update with magisk root? I am rooted with magisk. I am doing a backup of my apps and settings before I do the update (just to be safe...that has nothing to do with being rooted). I'll then tell Magisk Manager to disable root, do the OTA, not reboot, and then tell Magisk Manager that the OTA is done, then reboot. If the OTA is flaky and forces a reboot in the middle of the update, I'll lose root and will have to manually re-root the phone. I'm hoping that doesn't happen. I should be able to report my results in the next hour. 2 Quote Link to post Share on other sites
Laska 41 Posted March 5, 2020 Share Posted March 5, 2020 6 minutes ago, david said: I am rooted with magisk. I am doing a backup of my apps and settings before I do the update (just to be safe...that has nothing to do with being rooted). I'll then tell Magisk Manager to disable root, do the OTA, not reboot, and then tell Magisk Manager that the OTA is done, then reboot. If the OTA is flaky and forces a reboot in the middle of the update, I'll lose root and will have to manually re-root the phone. I'm hoping that doesn't happen. I should be able to report my results in the next hour. How you gonna "tell" magisk about OTA...? Quote Link to post Share on other sites
david 929 Posted March 5, 2020 Share Posted March 5, 2020 5 minutes ago, Laska said: How you gonna "tell" magisk about OTA...? Follow the first part of this tutorial (not the FlashFire part): https://github.com/topjohnwu/Magisk/blob/master/docs/tutorials.md 2 Quote Link to post Share on other sites
Laska 41 Posted March 5, 2020 Share Posted March 5, 2020 25 minutes ago, david said: Follow the first part of this tutorial (not the FlashFire part): https://github.com/topjohnwu/Magisk/blob/master/docs/tutorials.md Well, after reading this I'm affraid I'm screwed -I've modified my /system partition... Is there any other way to install update? Quote Link to post Share on other sites
david 929 Posted March 5, 2020 Share Posted March 5, 2020 11 minutes ago, Laska said: Well, after reading this I'm affraid I'm screwed -I've modified my /system partition... Is there any other way to install update? You can download it like the people did at the start of this topic and pick it that way. I have no idea how that interacts with Magisk though. The point of Magisk is to have a system-less root. Why did you need to update /system? Quote Link to post Share on other sites
david 929 Posted March 5, 2020 Share Posted March 5, 2020 (edited) 26 minutes ago, Laska said: Is it make ane difference? After all, OTA app is downloading update package to SD, am I right? Mainly I've uninstalled many apps from /system. To be honest, I've never done a manual OTA .zip install in the way the people at the beginning of this topic were talking about. My guess is that will undo your /system updates and your boot image updates (magisk) and you will be left with stock without root. You can then reroot and re-uninstall apps from /system. You could also use other standard methods to apply the .zip: https://www.theandroidsoul.com/how-to-install-ota-updates-manually-using-recovery-and-adb-sideload/ Getting into recovery on the Pro1 requires some extra button presses: Edited March 5, 2020 by david 1 Quote Link to post Share on other sites
Laska 41 Posted March 5, 2020 Share Posted March 5, 2020 11 minutes ago, david said: To be honest, I've never done a manual OTA .zip install in the way the people at the beginning of this topic were talking about. My guess is that will undo your /system updates and your boot image updates (magisk) and you will be left with stock without root. You can then reroot and re-uninstall apps from /system. You could also use other standard methods to apply the .zip: https://www.theandroidsoul.com/how-to-install-ota-updates-manually-using-recovery-and-adb-sideload/ Getting into recovery on the Pro1 requires some extra button presses: Hmm, I think that update package is to small to contain apps from /system partition, it is only 69mb... Quote Link to post Share on other sites
david 929 Posted March 5, 2020 Share Posted March 5, 2020 (edited) 18 minutes ago, david said: To be honest, I've never done a manual OTA .zip install in the way the people at the beginning of this topic were talking about. My guess is that will undo your /system updates and your boot image updates (magisk) and you will be left with stock without root. Thinking about this more, the update is probably incremental, so it wouldn't have everything in it to replace everything in /system. I guess that could leave you in a weird state, depending on the exact changes to /system that you made vs what the incremental update is trying to modify. Hopefully it would recognize this and give you an error during the flash. If none of these methods work, then you could always go back to the factory image and do all the OTAs from there forward and reroot after that. UPDATE: I'm making educated guesses here. If anything looks out of place, other people should feel free to correct the wrong information. Edited March 5, 2020 by david Quote Link to post Share on other sites
david 929 Posted March 5, 2020 Share Posted March 5, 2020 (edited) 4 minutes ago, Laska said: Hmm, I think that update package is to small to contain apps from /system partition, it is only 69mb... Yeah, see my next post above. Edited March 5, 2020 by david 1 Quote Link to post Share on other sites
david 929 Posted March 5, 2020 Share Posted March 5, 2020 Also, going forward, if you have root, you can use various apps to to freeze the apps you want to get rid of instead of modifying /system to uninstall them. Alternatively, if the app has the "Disable" option in its system settings screen, you can use that to stop it from running. Quote Link to post Share on other sites
Laska 41 Posted March 5, 2020 Share Posted March 5, 2020 12 minutes ago, david said: Yeah, see my next post above. This is what I'm afraid of, it will eventually lead me to lose everything because when I flash stock system.img I will have to wipe /data partition because of forced encryption... Quote Link to post Share on other sites
david 929 Posted March 5, 2020 Share Posted March 5, 2020 22 minutes ago, Laska said: This is what I'm afraid of, it will eventually lead me to lose everything because when I flash stock system.img I will have to wipe /data partition because of forced encryption... Did you disable encryption on /data somehow? Quote Link to post Share on other sites
david 929 Posted March 5, 2020 Share Posted March 5, 2020 (edited) 4 hours ago, david said: I am rooted with magisk. I am doing a backup of my apps and settings before I do the update (just to be safe...that has nothing to do with being rooted). I'll then tell Magisk Manager to disable root, do the OTA, not reboot, and then tell Magisk Manager that the OTA is done, then reboot. If the OTA is flaky and forces a reboot in the middle of the update, I'll lose root and will have to manually re-root the phone. I'm hoping that doesn't happen. I should be able to report my results in the next hour. It worked. OTA info screen: I then went into Magisk Manager and uninstalled it, telling it to restore the previous image. Next, started the download for the OTA: One interesting thing was that it automatically started installing after the download. I thought in the past that it gave you an option tap something to start the install after the download was done, but I could be mistaken about that. This means it is important to uninstall Magisk before even starting the download. It also showed 100% complete immediately after the download was complete and the installation started. However, there was a notification for the install, so I tapped on that and then got this screen: After a while, without any progress bar change, that changed to: Be very careful at this point. You aren't just responding "OK" to the message. If you tap "OK", it will restart the phone. I'm guessing "CANCEL" will not restart the phone, but I didn't test that. At this point, without tapping either button, I went back into Magisk Manager and told it to install Magisk, picking the "Install to Inactive Slot (After OTA)" option. It then did the Magisk install over the top of the OTA, in the inactive slot, backing up the boot image first, so that it is ready to do this whole process again with the next OTA: I then went back into the OTA screen and tapped "OK", causing it to reboot. That could have been done in the Magisk Manager screen with the yellow Reboot button or I could have manually done it with the power button. The method of reboot shouldn't matter at this point. After rebooting: And root was maintained, which is the whole point of this exercise. NOTE: You have to originally achieve root in the proper way for this method to work. And that proper way is for Magisk Manager to be given a non-patched boot image file that is identical to the one you are currently using. It will make a backup of that file (for later use in the OTA process) and will also create a patched version of that file. You then copy that patched file to your PC and use fastboot to flash it. (https://android.gadgethacks.com/how-to/make-ota-updates-easy-by-rooting-your-pixel-3-with-magisks-boot-image-patch-0189139/) If you don't go through the proper steps to acquire root with Magisk Manager, then you won't be able to use the Magisk Manager features to survive the next OTA update. SUB-NOTE: Technically there is a way to hack it and give Magisk Manager a backup boot image that it didn't backup itself, but I haven't tried that. https://forum.xda-developers.com/pixel-4-xl/how-to/guide-alternative-method-applying-ota-t4023175 If you attempt this, there has been a change to where Magisk Manager stores its backup images now. They are now at /data/magisk_backup_(hash)/boot.img.gz instead of having the .gz file right in /data. Also read the comments about changing the recoverymode variable in the config file to false if it is true. If anyone is in a phone state where they don't have root and have the 20200304 firmware on their phone, and they want to root it, let me know and I can upload the boot image for the 20200304 firmware so that you can have Magisk Manager patch it, etc. Edited March 6, 2020 by david 6 Quote Link to post Share on other sites
EskeRahn 5,460 Posted March 5, 2020 Share Posted March 5, 2020 8 minutes ago, david said: It worked. It would be easier to read if you sorted them chronologically... *LOL* 1 Quote Link to post Share on other sites
david 929 Posted March 5, 2020 Share Posted March 5, 2020 9 minutes ago, EskeRahn said: It would be easier to read if you sorted them chronologically... *LOL* I uploaded them from my phone and posted it as-is, and then edited the post on my laptop. You caught it in between my edits. :-) 1 1 Quote Link to post Share on other sites
Craig 1,435 Posted March 5, 2020 Author Share Posted March 5, 2020 @david just documented a walkthru of the procedure to update stock to the March 4th OTA while keeping magisk root: https://community.fxtec.com/topic/2849-new-ota-update-stamped-2020-03-04/?do=findComment&comment=46403 1 2 Quote Link to post Share on other sites
SirBaconIII 66 Posted March 5, 2020 Share Posted March 5, 2020 30 minutes ago, david said: It worked. Thanks for being the guinea pig here. I got this notification about the ota, and the part about it restarting to recovery to apply the update made me think this update would force a restart before installing. Glad to know that isn't the case. Quote Link to post Share on other sites
david 929 Posted March 5, 2020 Share Posted March 5, 2020 14 minutes ago, SirBaconIII said: Thanks for being the guinea pig here. I got this notification about the ota, and the part about it restarting to recovery to apply the update made me think this update would force a restart before installing. Glad to know that isn't the case. Yeah, I forgot to comment on that. That message was really weird. There is no "Install now" button to select. And why in the world would it go into Recovery Mode to install an OTA update to an A/B device, since the whole point is that you can install it while you are using the phone and not need to restart until you want to. :-) Quote Link to post Share on other sites
david 929 Posted March 5, 2020 Share Posted March 5, 2020 (edited) I added this to my post above, but I'm duplicating it here in case anyone missed it because it is important. If you don't follow the steps properly the first time you root, you won't be able to do what I documented above (which has also been documented elsewhere on the forums by other people, but for people reading this topic, and not seeing the others, it is good to have it here as well). ... NOTE: You have to originally achieve root in the proper way for this method to work. And that proper way is for Magisk Manager to be given a non-patched boot image file that is identical to the one you are currently using. It will make a backup of that file (for later use in the OTA process) and will also create a patched version of that file. You then copy that patched file to your PC and use fastboot to flash it. (https://android.gadgethacks.com/how-to/make-ota-updates-easy-by-rooting-your-pixel-3-with-magisks-boot-image-patch-0189139/) If you don't go through the proper steps to acquire root with Magisk Manager, then you won't be able to use the Magisk Manager features to survive the next OTA update. SUB-NOTE: Technically there is a way to hack it and give Magisk Manager a backup boot image that it didn't backup itself, but I haven't tried that. https://forum.xda-developers.com/pixel-4-xl/how-to/guide-alternative-method-applying-ota-t4023175 If you attempt this, there has been a change to where Magisk Manager stores its backup images now. They are now at /data/magisk_backup_(hash)/boot.img.gz instead of having the .gz file right in /data. Also read the comments about changing the recoverymode variable in the config file to false if it is true. If anyone is in a phone state where they don't have root and have the 20200304 firmware on their phone, and they want to root it, let me know and I can upload the boot image for the 20200304 firmware so that you can have Magisk Manager patch it, etc. See below for the link to the file. Edited March 6, 2020 by david 1 Quote Link to post Share on other sites
david 929 Posted March 6, 2020 Share Posted March 6, 2020 On 3/1/2020 at 8:10 PM, Craig said: Just a note, if you're installing Magisk on LIneage, you don't need to go to all this effort. Just use lineageos recovery to adb sideload it. Question on this. Are you saying this is because there is no normal OTA process for LineageOS, so every time you update LineageOS, you'll lose root anyway, and have to re-flash magisk? Quote Link to post Share on other sites
EskeRahn 5,460 Posted March 6, 2020 Share Posted March 6, 2020 1 hour ago, Craig said: @david just documented a walkthru of the procedure to update stock to the March 4th OTA while keeping magisk root: https://community.fxtec.com/topic/2849-new-ota-update-stamped-2020-03-04/?do=findComment&comment=46403 Sorry, moved it all over here, as it is not related to the specific OTA, but more general usable 🙂 1 Quote Link to post Share on other sites
david 929 Posted March 6, 2020 Share Posted March 6, 2020 3 minutes ago, EskeRahn said: Sorry, moved it all over here, as it is not related to the specific OTA, but more general usable 🙂 Thanks! I put a pointer post in the other thread for people over there to follow back here if they are dealing with root issues. 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.