tdm 2,322 Posted August 4, 2020 Author Share Posted August 4, 2020 5 hours ago, DieBruine said: @tdm Did you add the rm /persist/data/fingerprint tot the new nightly? I ask because I'm having the same issues with my fingerprints being forgotten. I tried rm /persist/data/fingerprint via ADB. Permission denied is what I got. So just to be sure I sideloaded SU-arm64 and searched for /persist/data/fingerprint.... Nowhere to be found. Which is why I'm hoping you added your script. Otherwise I have no idea what's happening here. I will add my fingerprints and reboot again, see what happens. After a reboot my fingerprints are gone again. Unable to find nor delete /persist/data/fingerprint. Yessir, I certainly did. But I don't think it does what you expect. I have no way to correlate the system fingerprints with the vendor fingerprints. All the script does is check if the system data has been wiped. If so, it wipes the persist data. Note that removing all fingerprints does not (currently) count -- the script only checks for the presence of the system fingerprint file, not that it is empty. But you still have the issue of the vendor HAL never deleting fingerprints. So, if you enroll more than ten fingerprints without deleting the persist data, you will always run into this issue. There is one improvement that I can think to make: I could add a check to see if the system fingerprint file is empty and delete the persist data in that case. That would allow the persist data to be deleted without a data wipe. But really, how many people enroll more than ten fingerprints? And how many of those are not aware of this issue enough to erase the persist data themselves? 1 Quote Link to post Share on other sites
DieBruine 397 Posted August 4, 2020 Share Posted August 4, 2020 (edited) 1 hour ago, tdm said: My bad... I hope. I forgot to run adb root 😅. Now I will reboot and hope everything is fine... Give me a couple of minutes. After a reboot my fingerprints are gone again. Unable to find nor delete /persist/data/fingerprint.Which was completely my mistake. I forgot to run adb root 🥴 rm * /persist/data/fingerprint did the trick for me... Thanks anyway for the response. By the way, are there plans to enable unlocking before boot back in LOS? I think it was removed in 14.x. Edited August 4, 2020 by DieBruine 1 Quote Link to post Share on other sites
EskeRahn 5,460 Posted August 4, 2020 Share Posted August 4, 2020 I'm not sure if it is my memory failing me or something has changed with the 20200803 version. When I dial *#*#INFO#*#* in stock I can choose either "Phone1 information" or "Phone2 Information". And I remember it as the same on Lineage, but now I only see "Phone information" Is it my memory that fails me, or an accidental change? Quote Link to post Share on other sites
tdm 2,322 Posted August 4, 2020 Author Share Posted August 4, 2020 44 minutes ago, EskeRahn said: I'm not sure if it is my memory failing me or something has changed with the 20200803 version. When I dial *#*#INFO#*#* in stock I can choose either "Phone1 information" or "Phone2 Information". And I remember it as the same on Lineage, but now I only see "Phone information" Is it my memory that fails me, or an accidental change? Do you actually have two SIM cards inserted? I believe Lineage has cleaned up the Qualcomm stuff for multi-SIM so that it looks nicer. That may include hiding options that are not available/useful. Quote Link to post Share on other sites
EskeRahn 5,460 Posted August 4, 2020 Share Posted August 4, 2020 1 minute ago, tdm said: Do you actually have two SIM cards inserted? I believe Lineage has cleaned up the Qualcomm stuff for multi-SIM so that it looks nicer. That may include hiding options that are not available/useful. Usually not, but inserted two to test the VoLTE issues I got with my primary carrier and the Pro1. Quote Link to post Share on other sites
tdm 2,322 Posted August 4, 2020 Author Share Posted August 4, 2020 For users other than English and German, note... https://community.fxtec.com/topic/3050-yellow-arrow-key-different-usage-in-stock-and-lineageos/?do=findComment&comment=51003 1 Quote Link to post Share on other sites
puppymang 6 Posted August 4, 2020 Share Posted August 4, 2020 (edited) On 8/3/2020 at 8:07 AM, tdm said: Indeed. Before you lock, make absolutely sure that you have "allow bootloader unlock" enabled in the security settings. If you lock with that disabled and anything goes wrong, you need EDL to fix it. And trust me, EDL is much more finicky about USB ports than fastboot, as many here can testify. thanks for the tip. i was able to lock the device again safely and then unlocked it once more but still no dice. fastboot wont let me flash a custom recovery or the old stock firmware. if i try to choose a slot it says that slots aren't supported on the device Edited August 4, 2020 by puppymang Quote Link to post Share on other sites
tdm 2,322 Posted August 4, 2020 Author Share Posted August 4, 2020 3 minutes ago, puppymang said: thanks for the tip. i was able to lock the device again safely and then unlocked it once more but still no dice. fastboot wont let me flash a custom recovery or the old stock firmware. if i try to choose a slot it says that slots aren't supported on the device Then it is most likely a hardware issue. Try different cables and a different USB port, and even a different host PC. Many folks find that host USB-C ports do not work properly, they must use a host USB-A port. 1 1 Quote Link to post Share on other sites
jamescarruthers 37 Posted August 6, 2020 Share Posted August 6, 2020 Hi everyone, I received my Pro1 a few days ago and am trying Lineage OS for the first time. I'll say hello properly another time but for now I need some help and hope someone is around! It is currently on its first boot and has been on the little circle travelling right-to-left, following an arc for about 30 minutes. Is this normal? I searched online and read references to it taking a long time (e.g. 15 minutes) for its first boot. Mine is 30 minutes and counting! Shall I just leave it or has something gone wrong? Also, I couldn't get "fastbot oem unlock" to work (from this page: https://wiki.lineageos.org/devices/pro1/install) I now realise (from this thread!) that this instruction should have been written "fastboot flashing unlock". At the time I just missed this step out and went to the next step because I could see that under "Developer Options" OEM Unlock was already unlocked. Was it okay to miss this step or is this the cause of my non-stop first boot? To fix it, do I have to start again? Quote Link to post Share on other sites
jamescarruthers 37 Posted August 6, 2020 Share Posted August 6, 2020 Oh, and do I need to do something early on to avoid the forgetting of fingerprints or is this fixed in the latest verrsion of Lineage OS? Quote Link to post Share on other sites
DieBruine 397 Posted August 6, 2020 Share Posted August 6, 2020 (edited) 3 minutes ago, jamescarruthers said: Oh, and do I need to do something early on to avoid the forgetting of fingerprints or is this fixed in the latest verrsion of Lineage OS? Fingerprint issue was a stock thing as far as I know (and experienced). Edited August 6, 2020 by DieBruine Quote Link to post Share on other sites
jamescarruthers 37 Posted August 6, 2020 Share Posted August 6, 2020 1 minute ago, DieBruine said: Fingerprint issue was a stock thing as far as I know (and experienced). Thanks for the quick reply! I ran stock Google Android for a day or two and it seemed to remember my finger prints between the few reboots I did, so that is good. Fingers crossed for Lineage working with prints... if it ever boots? Do you know anothing about how long it should take to boot first time to Lineage OS and if me missing out the "fastbot oem unlock" or "fastboot flashing unlock" has wrecked my first install? Quote Link to post Share on other sites
EskeRahn 5,460 Posted August 6, 2020 Share Posted August 6, 2020 2 minutes ago, jamescarruthers said: Thanks for the quick reply! I ran stock Google Android for a day or two and it seemed to remember my finger prints between the few reboots I did, so that is good. Fingers crossed for Lineage working with prints... if it ever boots? Do you know anothing about how long it should take to boot first time to Lineage OS and if me missing out the "fastbot oem unlock" or "fastboot flashing unlock" has wrecked my first install? Did you remember to wipe the data partition going from Stock to LineageOS? It should not take half an hour to boot. Could be the unlock thing also. I'm not sure.... 😥 Quote Link to post Share on other sites
jamescarruthers 37 Posted August 6, 2020 Share Posted August 6, 2020 3 minutes ago, EskeRahn said: Did you remember to wipe the data partition going from Stock to LineageOS? Is that the same as: " Factory Reset, then Format data / factory reset" as in the instructions here: https://wiki.lineageos.org/devices/pro1/install I am completely new to Android, having been on BB10 since it came out! Quote Link to post Share on other sites
jamescarruthers 37 Posted August 6, 2020 Share Posted August 6, 2020 I started again, did the "fastboot flashing unlock" and it came back saying that it was already unlocked. From Recorvery I did a wipe. I sideloaded the two ZIP files (LOS and Mind the GApps), rebooting inbetween. They seemed to load fine, stating "Total xfer: 1.00x" on the command prompt screen on the computer. On the Pro1, there were errors at the beginning of the LOS load (something about couldn't find somethign on "D:" and "E:", but then went on to load. Sorry I didn't have anything to hand to record this. Also, when sideloading the Mind the GApps stuff, I got a prompt about signature, which I said 'load anyway' Selected Reboot from the main screen on Recovery Now on the same little LOS loading screen with a Circle moving in the arc, right-to-left. I guess I'll give it half an hour. Anyone got any ideas, please? Quote Link to post Share on other sites
tdm 2,322 Posted August 6, 2020 Author Share Posted August 6, 2020 (edited) 14 minutes ago, jamescarruthers said: I started again, did the "fastboot flashing unlock" and it came back saying that it was already unlocked. From Recorvery I did a wipe. I sideloaded the two ZIP files (LOS and Mind the GApps), rebooting inbetween. They seemed to load fine, stating "Total xfer: 1.00x" on the command prompt screen on the computer. On the Pro1, there were errors at the beginning of the LOS load (something about couldn't find somethign on "D:" and "E:", but then went on to load. Sorry I didn't have anything to hand to record this. Also, when sideloading the Mind the GApps stuff, I got a prompt about signature, which I said 'load anyway' Selected Reboot from the main screen on Recovery Now on the same little LOS loading screen with a Circle moving in the arc, right-to-left. I guess I'll give it half an hour. Anyone got any ideas, please? After loading lineage, reboot into recovery again to switch slots. Then load gapps. Edited August 6, 2020 by tdm Quote Link to post Share on other sites
jamescarruthers 37 Posted August 6, 2020 Share Posted August 6, 2020 I think I did that! I was following these instructions too from DieBruien: When you reboot in to recovery, does this automatically change the slots or is there something I should do in there to make it happen. BTW I have no idea what slots, but will learn later. Like I say, I am new to Android! Quote Link to post Share on other sites
jamescarruthers 37 Posted August 6, 2020 Share Posted August 6, 2020 I am loading: lineage-16.0-20200803-recovery-pro1.img lineage-16.0-20200803-nightly-pro1-signed.zip MindTheGapps-8.1.0-arm64-20180808_153856.zip 1 Quote Link to post Share on other sites
tdm 2,322 Posted August 6, 2020 Author Share Posted August 6, 2020 7 minutes ago, jamescarruthers said: I think I did that! I was following these instructions too from DieBruien: When you reboot in to recovery, does this automatically change the slots or is there something I should do in there to make it happen. BTW I have no idea what slots, but will learn later. Like I say, I am new to Android! It may be clearer to read and follow this (but use the official build files, not mine): https://files.nwwn.com/android/pro1/lineage.html 2 Quote Link to post Share on other sites
jamescarruthers 37 Posted August 6, 2020 Share Posted August 6, 2020 Thank you very much for that guide. I foloowed it and it jogged my mind to check the files I was trying to siddeload. I was trying to sideload the MindTheGapps-8.1.0-arm64-20180808_153856.zip (I guess for Android v. 8 ) when I should have been loading MindTheGapps-9.0.0-arm64-20190615_031441.zip (presumably for Android v. 9 ). Loading the v 9 Mind the G Apps resulted in booting in to Lineage. So USER ERROR on my behalf! A rather rough start in the Android world but I'm going to get started setting it up! 🙂 1 2 Quote Link to post Share on other sites
DieBruine 397 Posted August 6, 2020 Share Posted August 6, 2020 (edited) 1 hour ago, jamescarruthers said: I am loading: lineage-16.0-20200803-recovery-pro1.img lineage-16.0-20200803-nightly-pro1-signed.zip MindTheGapps-8.1.0-arm64-20180808_153856.zip Dude 🥴... Read 🧐 MindTheGapps-9999999999999999999999999999999999999999999999 😘 Guess I was too slow 😂 (I'm in a meeting, trying not to get caught). Edited August 6, 2020 by DieBruine 3 Quote Link to post Share on other sites
jamescarruthers 37 Posted August 6, 2020 Share Posted August 6, 2020 On the Home Screens, when you make a Folder of Apps the name of the folder is displayer in Portrait Mode. In Landscape Mode the names disappear. Is there a way to switch the names on in Landscape mode? Quote Link to post Share on other sites
EskeRahn 5,460 Posted August 6, 2020 Share Posted August 6, 2020 12 hours ago, jamescarruthers said: On the Home Screens, when you make a Folder of Apps the name of the folder is displayer in Portrait Mode. In Landscape Mode the names disappear. Is there a way to switch the names on in Landscape mode? How odd, it stays on mine? What is the name you gave it? (Mine is "Google") ADD: In Settings, Display, Advanced, I have Font size set to Large and Display size set to small - if that matters.... EDIT: Silly me, Lineage thread. See the same phenomena, sorry. 😔 Quote Link to post Share on other sites
jamescarruthers 37 Posted August 6, 2020 Share Posted August 6, 2020 (edited) I changed my settings to match you're but still no Folder labels in Landscape. Only a mild irritance but there must be a way to get round it. I just noticed that also the APPS have no name labels while in landscape either! Edited August 6, 2020 by jamescarruthers Quote Link to post Share on other sites
EskeRahn 5,460 Posted August 7, 2020 Share Posted August 7, 2020 9 hours ago, jamescarruthers said: I changed my settings to match you're but still no Folder labels in Landscape. Only a mild irritance but there must be a way to get round it. I just noticed that also the APPS have no name labels while in landscape either! Oh silly me!! This is the Lineage thread. Yes I see it too. (I do not see it in Stock) Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.