Aramon 6 Posted February 24, 2023 Share Posted February 24, 2023 Hello, I would like to buy a fxtec-smartphone. For this reason, I would be interested in your opinion about the fxtec-smartphone. What are the Pros and Cons? And is an fxtec comparable to a Blackberry passport? Best regards Matthias Quote Link to post Share on other sites
doubleddav 34 Posted February 24, 2023 Share Posted February 24, 2023 Hi Matthias, You can see my experience here if you like: https://community.fxtec.com/topic/3782-experience-so-far-with-pro1x 1 Quote Link to post Share on other sites
Aramon 6 Posted February 24, 2023 Author Share Posted February 24, 2023 Thank you 👍 Quote Link to post Share on other sites
claude0001 1,315 Posted February 27, 2023 Share Posted February 27, 2023 It is important to understand that there are two F(x)tec phones: the Pro1 from late 2019 and the Pro1-X that is currently shipping (slowly). I own both of them. My original Pro1 has its flaws: its camera is not really good, the LTE and WiFi connectivity are ok-ish but not stellar, and even the keyboard -- the one distinctive feature of the phone -- has never been much fun to use. That being said, the Pro1 has served me reliably for almost three years as my only phone. I use it with a custom LineageOS ROM which I have configured to double as a miniature GNU/Linux palmtop. The latter functionality was very important to me, as I bought the Pro1 to replace my beloved, but ageing, Nokia N900. Overall, I am happy I got the Pro1 and never looked back. My Pro1-X ... well ... I cannot recommend. While I haven't battle-tested the device as my daily driver, I mostly agree with the experience @doubleddav has shared in that other thread. The Pro1-X does improve on my Pro1 in some aspects: its camera seems to perform better in difficult light conditions, its screen is of higher quality (no green tint at low brightness), and -- perhaps most importantly -- the keyboard is much more reliable/responsive compared to my Pro1. However (BIG "however"), my Pro1-X is practically useless as a phone due to its GSM/LTE connectivity issues (as also reported by @doubleddav in their report): using the device on the go (i.e. without WiFi connection) is practically impossible for me. Users around the globe share the same experience. The reasons for this are currently being explored but, sadly, up to now F(x)tec have done little beyond acknowledging that there indeed is a problem. While I do hope that I will find some use for my Pro1-X at some point, for now, I have have given up on the idea that it will ever replace my Pro1 as my regular phone. 1 1 Quote Link to post Share on other sites
Rob. S. 1,643 Posted February 28, 2023 Share Posted February 28, 2023 (edited) I can only add that for me, in Germany, with either Vodadone or T-Mobile as the carrier (the third of three German carriers, Telefónica/O2, may be a different story, I have no such SIM card to try), the device is usable for both telephony and mobile internet access with some but no too severe connectivity issues, at least since I've been running the LTE Discovery app in "No-LTE cycle" mode. (Until I installed LTE Discovery I used to carry a mobile Wifi router with VoWifi enabled on the phone, which I still sometimes do and which of course makes for an even better and actually quite perfect connection. For telephony via Wifi router, of course, VoWifi must be offered by the provider, too, and in Germany at least Vodafone and T-Online do, don't know about Telefónica/O2.) I'm using the Pro1X for half a year now as a daily driver (just moving from that half-year-old QWERTZ to a QWERTY Pro1X, only because I've got one and I've been moving everything else in my surroundings to a QWERTY keyboard, too) and I'm happy enough with it to not want my Pro1 back. I like the improved camera and even the stock Android 11 experience is good, in great contrast to what the original Pro1 came with. I do hope F(x)tec will get the bugs fixed somehow (and will continue to exist, for that matter), but even if they wouldn't, I'm determined to continue to use one of these phones for as long as mine still works or I can get it repaired or a replacement. Edited February 28, 2023 by Rob. S. 4 Quote Link to post Share on other sites
claude0001 1,315 Posted February 28, 2023 Share Posted February 28, 2023 4 hours ago, Rob. S. said: [...] (the third of three German carriers, Telefónica/O2, may be a different story, I have no such SIM card to try), the device is usable for both telephony and mobile internet access with some but no too severe connectivity issues, at least since I've been running the LTE Discovery app in "No-LTE cycle" mode. [...] I'm on German O2 (cannot recommend), and mobile communication is horrible. Unfortunately I couldn't get the LTE-Discovery app to work on LineageOS. What is that "No LTE cycle"-mode actually doing? Meanwhile I have found Rx Monitor, which at least allows me to see what radio frequencies the modem is using, though that app (to my knowledge) cannot influence the modem behaviour. Contrary to what others observe, my Pro1-X works when it manages to connect on band 3 or band 1. It seems to fail when forced to use band 20, the "long-range" LTE frequency (800 MHz). Unfortunately, both, my Pro1 and my Pro1-X fall back to that quite often, even though I am in the centre of a big city. I guess shitty O2 coverage is to blame. That having been said, the Pro1 works fine on 800 MHz, the Pro1-X doesn't. Plus, after its modem has once stalled on band 20, the Pro1-X can no longer communicate even on other bands if they become (re-)available. It then needs to be "reinitialised" by switching to airplane-mode and back. Maybe I could get a useful phone by switching to T-Mobile (known to have superior coverage compared to O2). But for the time being I'm not considering that as an option. I still regard mobile data as the core function of a smartphone that should "just work" without requiring any workarounds on my side. I might reconsider after my Pro1 breaks down on me ... 1 2 Quote Link to post Share on other sites
VaZso 1,997 Posted February 28, 2023 Share Posted February 28, 2023 1 hour ago, claude0001 said: Plus, after its modem has once stalled on band 20, the Pro1-X can no longer communicate even on other bands if they become (re-)available. It then needs to be "reinitialised" by switching to airplane-mode and back. It may happen that antenna design of Pro1X is worse than Pro1's design (I don't know) but this problem sounds like most likely the SoC's firmware also has problems which should be independent of F(x)tec... or other manufacturers are actively doing workarounds on poorly written software of the main component of the phone? ...or other manufacturers are receiving firmware updates from Qualcomm to address SoC-related issues but F(x)tec does not? ...or something happens which triggers an issue what does not happen on other phones? ... 1 2 Quote Link to post Share on other sites
doubleddav 34 Posted March 1, 2023 Share Posted March 1, 2023 I was wondering about that, is there a phone with the same chipset? Could we pull something from there and port it over to a ROM for the Pro 1x? 1 Quote Link to post Share on other sites
EskeRahn 5,421 Posted March 1, 2023 Share Posted March 1, 2023 9 hours ago, claude0001 said: Contrary to what others observe, my Pro1-X works when it manages to connect on band 3 or band 1. It seems to fail when forced to use band 20, the "long-range" LTE frequency (800 MHz). That is a really interesting observation. And this points towards software/firmware and not hardware! I mean the most likely common denominator is that it works when not switching bands. So it could really be the band-switching that is flawed! That would explain why testing on different frequencies might have worked well, but real life switching could still fail. It might be under particular conditions or special pairs of bands - I have no idea, just guessing... If some carriers use mainly one band (at the least in some areas), we might not see it, but other carriers might rely more heavily on multiple bands, and thus trigger the bug, On 2/27/2023 at 10:16 PM, claude0001 said: up to now F(x)tec have done little beyond acknowledging that there indeed is a problem. Not to split sticks, but we do not know on their efforts... For all we know they could be hard at work, but sure they have not provided a solution to the issue. We do know that they at some point said they were unable to reproduce the bug - and that obviously makes it REALLY hard for them to fix it. 1 Quote Link to post Share on other sites
claude0001 1,315 Posted March 1, 2023 Share Posted March 1, 2023 2 hours ago, EskeRahn said: I mean the most likely common denominator is that it works when not switching bands. So it could really be the band-switching that is flawed! I think I've seen it switch between bands 1 and 3 without loosing connection. Also, band 20 does not work for me even if it is the first frequency the modem tries after a "reset". Then again, my amount of testing has been really limited. I wouldn't dare jumping to any conclusions based on that. All-in-all, I believe these things are almost impossible to diagnose systematically in the wild. That really should have happened under laboratory conditions as part of QA ... 2 hours ago, EskeRahn said: we do not know on their efforts... For all we know they could be hard at work, but sure they have not provided a solution to the issue Sadly, I guess they are simply out of money and thus cannot afford the required diagnostic tests and fixes to the already manufactured phones (if the latter are at all possible). But let's see what happens ... Quote Link to post Share on other sites
EskeRahn 5,421 Posted March 1, 2023 Share Posted March 1, 2023 4 hours ago, claude0001 said: All-in-all, I believe these things are almost impossible to diagnose systematically in the wild Absolutely. but as other have it failing going from 20 to 3/1, and you see the complete opposite, to me indicates that it is the switching that could be the real culprit. Their communication has unfortunately always been sparse to put it mildly. So slim chances of them telling about work looking for the bug and/or looking for a fix. Once they told they are aware of the problem, the next we will hear is if (hopefully: when) they can offer something that improves or even fixes the bug. I have not got a clue on their financial situation, and have no clue on the resources allocated for bug-fixing either. I certainly hope that they are not in a catch22 having to choose between delivering phones in a condition a large portion can not really use, or fixing issues on a phone only delivered to very few of the ones awaiting it.IF the economy is the limiting factor, I would hope they delivered the phone as is, and then tried to crowd-source for some bugfixing. I have no idea how many would chip in, and how many would hope others will pay for it. Quote Link to post Share on other sites
Hook 2,940 Posted March 1, 2023 Share Posted March 1, 2023 I'm sure the Pro1x is not a money maker at this point, but Fxtec does have another venture that may be quite successful (you have to scroll to the very bottom of the page to find the FxTec link). https://www.linxdot.com/ I discovered it when Expansys sent me an add pairing the Pro1x with this device. It may be why they are not out of money. If so, great. 3 Quote Link to post Share on other sites
EskeRahn 5,421 Posted March 1, 2023 Share Posted March 1, 2023 Just now, steff said: That is crazy to me: They did not do the quality assurance, as claude0001 said, and you ask yourself how many of the angry and disappointed backers are willing to crowdfund more money for fixing the already paid and delayed device. I am running out of words Oh I'm not saying that that is where I want the whole thing to be&go! BUT trying to be pragmatic, I would rather pay (even) more money than having a device I could not use, I would expect that -though far from all- some others might feel the same. It is not a matter of right or wrong here. Sure feel free to criticize all that went wrong, but venting our frustrations does not change anything. It is a matter of looking at the possible alternatives. Neither many with not working devices nor few with better working ones sounds good to me. Nor does shelling out more money of course. But if those are the three alternatives, well...... Quote Link to post Share on other sites
claude0001 1,315 Posted March 1, 2023 Share Posted March 1, 2023 (edited) 3 hours ago, EskeRahn said: [...] venting our frustrations does not change anything [...] ... but it does provide relief sometimes. 🙂 3 hours ago, EskeRahn said: [...] those are the three alternatives [...] I'm afraid many will just consider this a lesson learned, walk away, and get themselves another phone. Last year, my wife bought a vendor-refurbished FP3+ (as the FP4 did not have a Lineage port yet), and its flawlessness makes F(x)tec look really disappointing. That neat device now serves me as an example that also smaller and think-outside-the-box companies can make competitive phones in today's market environment. As I wrote above, I do not regret getting my Pro1. But I must admit that, at significantly higher price, it can't even remotely compete with that (equally dated) FP3+ when it comes to build quality and user experience. Think of all the small, but systematic, problems we have discussed here over the years: green screen tint, poor camera performance, audio quality, radio strength, keyboard sensitivity, ... For that FP3+, we still have to find any such UX issues. Now, do not get me started on my prawn-X ... 😆 Edited March 1, 2023 by claude0001 Quote Link to post Share on other sites
Rob. S. 1,643 Posted March 1, 2023 Share Posted March 1, 2023 12 hours ago, EskeRahn said: 22 hours ago, claude0001 said: Contrary to what others observe, my Pro1-X works when it manages to connect on band 3 or band 1. It seems to fail when forced to use band 20, the "long-range" LTE frequency (800 MHz). That is a really interesting observation. And this points towards software/firmware and not hardware! I mean the most likely common denominator is that it works when not switching bands. So it could really be the band-switching that is flawed! Unfortunately I can report that while the Pro1X is rarely switching band at all when on Vodafone around here, it still loses connection frequently, every few minutes for long enough durations to prevent normal usage. The only good thing is that the LTE Discovery workaround mostly works for me. (And that mobile Wifi routers exist, for that matter...) 1 Quote Link to post Share on other sites
Rob. S. 1,643 Posted March 1, 2023 Share Posted March 1, 2023 (edited) [deleted] Edited March 1, 2023 by Rob. S. Quote Link to post Share on other sites
Rob. S. 1,643 Posted March 1, 2023 Share Posted March 1, 2023 2 hours ago, claude0001 said: Last year, my wife bought a vendor-refurbished FP3+ (as the FP4 did not have a Lineage port yet), and its flawlessness makes F(x)tec look really disappointing. Wife with FP3 (plus easily added FP3+ camera upgrade) here, too; excellent device (stock Android with exemplary update/upgrade service, though thinking about moving to an ungoogled alternative ROM). If it wasn't for the keyboard, that would be what I'd use, too. FP with hardware keyboard would have been be the greatest... I had been hoping for a bit of that originally from Fxtec... but that would inevitably have been clunkier and even more expensive. 2 Quote Link to post Share on other sites
EskeRahn 5,421 Posted March 2, 2023 Share Posted March 2, 2023 11 hours ago, Rob. S. said: Unfortunately I can report that while the Pro1X is rarely switching band at all when on Vodafone around here, it still loses connection frequently, every few minutes for long enough durations to prevent normal usage. The only good thing is that the LTE Discovery workaround mostly works for me. (And that mobile Wifi routers exist, for that matter...) Sad to hear... But could it be that when it fails, it is actually failing trying to switch to another band? I so not know if it is possible as a user, but could be interesting to see what would happen if we could lock it on a single band only. (Obviously not a solution, but just to help debug the issue, by narrowing it down) Quote Link to post Share on other sites
Rob. S. 1,643 Posted March 2, 2023 Share Posted March 2, 2023 Interesting idea. Goes beyond what I know of that stuff, unfortunately... Quote Link to post Share on other sites
sequestris 710 Posted March 2, 2023 Share Posted March 2, 2023 (edited) For the Pro 1 Pros: Keyboard is there which is what I really wanted Good battery life Works well on wi-fi calling Can send and receive MMS on Wifi FABULOUS camera now that I have the right software on it (see unedited images below) Expandable storage Cons: Phone call functionality sucks. I drop about 50% of my calls, when I am not on wifi text messages often get hung or don't go through Voice clarity blows and I need to use earbuds or put it on speaker Screen rotation gets hung and I have to lock and unlock the screen to fix Stuck on Android 9 forever Slow processor Menu search is horrid Keyboard is really inconvenient because of the width Bluetooth sometimes disconnects or hangs <more as I think of it> Edited March 4, 2023 by sequestris 2 1 Quote Link to post Share on other sites
jakfish 132 Posted March 2, 2023 Share Posted March 2, 2023 @sequestris I hadn't known that the original Pro also has call issues. After a minute of experimenting, I stopped using the Pro1x as a phone, but I knew the problems before buying. I admire you for hanging in there; it sounds as if it's still your daily. Would that be right? Quote Link to post Share on other sites
claude0001 1,315 Posted March 2, 2023 Share Posted March 2, 2023 (edited) 11 minutes ago, jakfish said: I hadn't known that the original Pro also has call issues. It has problems with VoLTE where the loudness setting of the handheld is ignored. For me, the VoLTE connection would also stall often while roaming - not sure is this is related to the Pro1 or to my carrier. However, I am in the comfortable position that German carriers will support GSM (ie. non-VoLTE) calls for years to come, so I just disabled VoLTE. Haven't had any call issues since. Regarding @sequestris saying the Pro1 is stuck on Android 9: This is true for the vendor-supplied ROM. There are very mature LineageOS ports from 16.0 (Android 9) all the way up to 20.0 (Android 13) if running a custom ROM is an option for you. Edited March 2, 2023 by claude0001 2 1 Quote Link to post Share on other sites
jakfish 132 Posted March 2, 2023 Share Posted March 2, 2023 Must be nice to make successful phone calls. 1 Quote Link to post Share on other sites
VaZso 1,997 Posted March 3, 2023 Share Posted March 3, 2023 6 hours ago, jakfish said: @sequestris I hadn't known that the original Pro also has call issues. After a minute of experimenting, I stopped using the Pro1x as a phone, but I knew the problems before buying. I admire you for hanging in there; it sounds as if it's still your daily. Would that be right? Basically Pro1 had a very loud speaker with limited effectiveness of volume setting. That was improved in a later firmware I think or maybe in LineageOS... Otherwise, microphone is a bit silent compared to other phones. I don't have problems with calling, signal strength / capability is not stunning but usable (my Motorola G6 was a bit worse but it was not stunning either), however, I think my service provider has not enabled VoLTE for me, at least it does not work... It also had a speaker miswiring where left and right speakers were swapped. It was also corrected (in software) in a later firmware upgrade, however, now the wrong speaker works in handsfree mode (which is right next to the microphone) causing worse handsfree capability. It had some radio band changing issue which has caused the phone to restart (it happened for me near a certain point of a motorway but only when I was traveling at one direction) but otherwise it was stable... however, it was also improved in a later firmware and I have no issues on the very same road since then. GPS positioning is perfect for me, bluetooth and NFS are working, also fingerprint reader became usable since I use LineageOS. Mobile network also works well and WiFi signal is also good, however sometimes it drops WiFi connection then reconnects... A few months ago we have found an interesting behaviour... after one of my friends has replaced his phone, he told me when he speaks with me, he hears excessive background noise but not when he speaks with others and also there is no noise when speaking with other phone at his site. I don't know its reason but it was not service provider-dependent or place dependent and during a side-by-side test, call quality was perfect using a Pro1X. (Anyway, generally Pro1X has much better call quality than Pro1 /what you hear and what other-party hears/, except its connectivity issues.) 1 Quote Link to post Share on other sites
sequestris 710 Posted March 4, 2023 Share Posted March 4, 2023 On 3/2/2023 at 2:31 PM, jakfish said: @sequestris I hadn't known that the original Pro also has call issues. After a minute of experimenting, I stopped using the Pro1x as a phone, but I knew the problems before buying. I admire you for hanging in there; it sounds as if it's still your daily. Would that be right? Yes. Still my daily driver. When you really love a device, you can work around its limitations. I can still make and receive calls and never get dropped when connected to external audio (car, headphones,speaker, etc). 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.