Ivaylo Hubanov

Hey guys, Anyone managed to run wireguard vpn client so far? I'm trying but it seems it's module needs newer kernel and to run it with older kernel I need to compile from source, but it fails to compile. Any help is much appreciated.

Man, you are awesome!!! It works! However I'm able to use it only in landscape mode... anyone have the same issue?

$ waydroid status Session: RUNNING Container: RUNNING Vendor type: HALIUM_11 Session user: droidian(32011) Wayland display: wayland-0 $ waydroid show-full-ui [12:36:04] Failed to get service waydroidplatform, trying again... [12:36:05] Failed to get service waydroidplatform, trying again... [12:36:06] Failed to get service waydroidplatform, trying again... [12:36:07] Failed to get service waydroidplatform, trying again... [12:36:08] Failed to get service waydroidplatform, trying again... [12:36:09] Failed to get service waydroidplatform, trying again... ... forever Tried waiting more than

That's what I've already tested... didn't work for me 😞

Hey man, Can you help me out with running Waydroid on my Pro1X with Droidian? Simple apt install waydroid works and I can see Waydroid's icon, but when I tap on it, nothing really happens. Any advise will be much appreciated! Thanks.

Anyone managed to run Waydroid? Please share your experience and possible steps to get it up and running.

awesome! thank you very much!

Can find instructions you used for PinePhone? Might be usefull to find the file.

Hey guys, droidian is awesome! I even managed to disable haptic feedback, as i'm using the phone overnight while the baby is sleeping and the noise from vibration is waking him up. However, I'm still having issues making droidian to remember my Displays>Scale factor. Every time when I reboot, it gets reset back to 300% which is kind of too big for me. Any ideas why this change is not permanent will be much appreciated!

I forgot to put it, but it doesn't seem I can edit the title... 😞

My physical keyboard backlight does not light on automatically when I open the keyboard... I've found how to manually switch it on/off by echoing 1/0 in /sys/class/leds/:kbd_backlight/brightness But now I need to find out how to detect when the keyboard is open or closed...

Any guide on how to install anbox will be much appreciated! 🙂

You mean it's not just mine, and we all suffer the same?

Hey guys, I'm experiencing some issues with connectivity at all... WiFi gets 2-5% packet loss and avg 35-40ms latency when pinging my home gateway... Compared to my old Android device where I get 0% loss and 20-25ms avg latency by holding both next to each other for the test... Also switching from WiFi to LTE sometimes require turning off mobile data and then back on... To restore connectivity... Strange is that when I switch to LTE and browsers show no connection... I can ping google.com from termux... (Which indicates name resolution and connection are fine) maybe network tran

Would be nice to disable fingerprint reader while it is not required for unlock or authenticate... I'm having trouble when holding the phone with right hand and typing on the keyboard... My palm seems to trigger fingerprint reads all the time which causes flickering and strange behavior. I know it's the perfect place for landscape mode, but come on... It's a mobile after all... I would really like to not use the physical keyboard, just to say hi to someone or type short answers like Yes, No... Also I don't see any good reason for keeping active this sensor all the time while it'

Hey guys, It turns out that fingerprint reader is placed in a very inconvenient place, so while holding my phone with right hand, it constantly gets triggered from my palm... Is it possible to disable while phone is unlocked and while it is not expecting me to authenticate using the finger?

Nice work just one clarification you might want to update the guide... To me this command doesn't execute: edl --loader=prog_firehose_ddr.elf reset reboot So I use "edl --loader=prog_firehose_ddr.elf reset" instead... I think the reboot at the end is not necessary and I'm not sure if it properly executes on any device at all 🤔

What you mean? Is Pro¹X supported by anbox? I can't see it in the official list in anbox website 🤔 If you have more information please share 😄

Worked! Thanks!

Hello, I'm facing an issue after restore my device from Ubuntu Touch. It seems my partition table is not properly restored and my stock android now shows 8gig storage... Used this guide to flash Ubuntu Touch: Then this guide to revert back to stock: Anyone knows how to restore partition sizes properly?

@mosenok, so while stuck in the boot logo I was trying to restart the phone, but dropped the button before it actually restart and it seems something triggered in the background and phone booted android properly!!! 🎆🎉🙈 So now I'm on the backup step then going back to try and flash Ubuntu Touch 🥵

One thing to note here, lsusb says it's in fastboot mode and display shows that under maintenance android with "no command" text... This is when I choose "Recovery mode" from menu

This is what I get: ``` # adb sideload merged-qssi_bengal-ota.zip adb: sideload connection failed: device unauthorized This adb server's $ADB_VENDOR_KEYS is not se Try 'adb kill-server' if that seems wrong Otherwise check for a confirmation dialog on your device adb: trying pre-KitKat sideload method.. adb: pre-KitKat sideload connection failed: device unauthorized This adb server's $ADB_VENDOR_KEYS is not se Try 'adb kill-server' if that seems wrong Otherwise check for a confirmation dialog on your device.

@mosenwell all seems fine then with me... Only last step fail so I remove reboot at the end of command... However I already did flash my device more than 10 times now and result is still the same... Stuck on the F(x)tec logo... Really open for more brave ideas... I only got my device yesterday... Waiting for it more than a year, just checked it was working fine with android then tried flashing Ubuntu Touch via UBports which failed and I'm stuck now... 🙈 If I can make it work with Ubuntu Touch that will be just fine... Was trying to restore stock firmware after I read about that

@mosenare you using special edl cable or normal USB type C cable that comes with device?