EskeRahn 5,421 Posted January 27, 2020 Share Posted January 27, 2020 56 minutes ago, fredrick said: The nokia n97 did not have that problem at all. Don't know about the n97 mini though. One of the n97 trailers from nokia has a tech guy showing off the "click" and "clack" noises that the phone makes when opening and closing it. 🙂 E.g. the E7 had four rubber 'feet' between the two halves that did this. 2 Quote Link to post Share on other sites
EskeRahn 5,421 Posted January 27, 2020 Share Posted January 27, 2020 1 hour ago, John Veness said: A nice side effect of this is that it also makes the bang when you open or close it a little quieter! (I wanted to add more pics but the 2 MB limit seems to apply even if you add multiple posts‽) You can get some self adhesive felt/velour that is thinner. E.g. used in jewel-boxes. e.g. https://www.ebay.co.uk/itm/223087344986 And yes, applying at the corners gives a more swoof than clang sound. When you have those four I would suggest adding two more in the middle, so it is more firm 'squeezing' in the hand. 1 Quote Link to post Share on other sites
david 921 Posted January 27, 2020 Share Posted January 27, 2020 2 minutes ago, EskeRahn said: You can get some self adhesive felt/velour that is thinner. E.g. used in jewel-boxes. e.g. https://www.ebay.co.uk/itm/223087344986 And yes, applying at the corners gives a more swoof than clang sound. When you have those four I would suggest adding two more in the middle, so it is more firm 'squeezing' in the hand. Is there any reason not to try using rubber instead of felt, that you can think of? 1 Quote Link to post Share on other sites
EskeRahn 5,421 Posted January 27, 2020 Share Posted January 27, 2020 7 minutes ago, david said: Is there any reason not to try using rubber instead of felt, that you can think of? Only that I do not know where to get it just as thin/soft. 🙂 But sure should technically be expected to be more durable, and easier to keep clean. ADD: I already ordered some 1mm neoprene adhesive, but it has not arrived yet, so do not how good/bad it would work. https://www.ebay.co.uk/itm/223689641795 2 Quote Link to post Share on other sites
david 921 Posted January 27, 2020 Share Posted January 27, 2020 19 minutes ago, EskeRahn said: Only that I do not know where to get it just as thin/soft. 🙂 But sure should technically be expected to be more durable, and easier to keep clean. ADD: I already ordered some 1mm neoprene adhesive, but it has not arrived yet, so do not how good/bad it would work. https://www.ebay.co.uk/itm/223689641795 Yeah, I was wondering about the proper thickness too. Any idea how thick your felt is? That neoprene looks like a nice way to do it. 1 Quote Link to post Share on other sites
altwouss 22 Posted January 27, 2020 Share Posted January 27, 2020 (edited) My screen seems to rattle when the keyboard is folded out. It's the first thing I noticed after I am finally done applying a screen protector. Is that the same rattle? Edited January 27, 2020 by altwouss Clarification. Quote Link to post Share on other sites
EskeRahn 5,421 Posted January 27, 2020 Share Posted January 27, 2020 3 hours ago, david said: Yeah, I was wondering about the proper thickness too. Any idea how thick your felt is? That neoprene looks like a nice way to do it. The self adhesive felt is about 0.50mm (EXCLUDING the wax-paper it delivered on) 1 Quote Link to post Share on other sites
david 921 Posted January 27, 2020 Share Posted January 27, 2020 9 minutes ago, EskeRahn said: The self adhesive felt is about 0.50mm (EXCLUDING the wax-paper it delivered on) I'll probably wait for your neoprene experiment and go that route if it works well for you. 1 Quote Link to post Share on other sites
John Veness 57 Posted January 27, 2020 Author Share Posted January 27, 2020 The felt is working well for me, but something a bit more smooth like rubber might be better. I worry little felt hairs may get into the keyboard. Quote Link to post Share on other sites
John Veness 57 Posted January 27, 2020 Author Share Posted January 27, 2020 1 hour ago, altwouss said: My screen seems to rattle when the keyboard is folded out. It's the first thing I noticed after I am finally done applying a screen protector. Is that the same rattle? That doesn't sound like the rattle I'm describing, so you may have a different problem. 1 Quote Link to post Share on other sites
EskeRahn 5,421 Posted January 27, 2020 Share Posted January 27, 2020 1 hour ago, altwouss said: My screen seems to rattle when the keyboard is folded out. It's the first thing I noticed after I am finally done applying a screen protector. Is that the same rattle? I think what you are describe is what I thought was originally meant with the small support arm. Try and close it on a thin piece of paper, touching the support arm. if that changes the sound, you nailed the culprit. 1 Quote Link to post Share on other sites
EskeRahn 5,421 Posted January 27, 2020 Share Posted January 27, 2020 37 minutes ago, david said: I'll probably wait for your neoprene experiment and go that route if it works well for you. Will report. But I fear the 1mm is too thick, unless it is very soft. (I ordered it for experimenting with self adhesive bumpers) 3 1 Quote Link to post Share on other sites
altwouss 22 Posted January 27, 2020 Share Posted January 27, 2020 (edited) 20 minutes ago, EskeRahn said: I think what you are describe is what I thought was originally meant with the small support arm. Try and close it on a thin piece of paper, touching the support arm. if that changes the sound, you nailed the culprit. I have opened a separate topic for my issue with a video. However, the issue seems to originate in the right arm. I will try and see if the support arm is involved. The support arm doesn't seem to have any out of place movement at all, I did just now notice that the right part of the screen does not contact the standoff that seems to be designed for the screen to rest on. Edited January 27, 2020 by altwouss Quote Link to post Share on other sites
fredrick 36 Posted January 29, 2020 Share Posted January 29, 2020 On 1/27/2020 at 4:42 PM, _DW_ said: yeah definitely didn't have the problem on the n97 mine is same as in video I spoke too soon though. Got my phone yesterday, then went and got my old n97 from the basement. They both have the same issue. A small gap. And i actually remember the extra noise noise the phone made each hard tap i made. Were can one get that felt tape? Any recommendations? (I live in sweden) 1 1 Quote Link to post Share on other sites
david 921 Posted January 29, 2020 Share Posted January 29, 2020 I tested this just now on my new phone. It was barely there. Then I realized that my P20 Pro TPU case is acting as a bumper for this purpose, so the screen doesn't contact the keyboard when tapping. If I peel back the case a bit on one corner, then it does make a louder noise. Hard to tell if it is as much as the video or not. I'd say similar or less. 1 Quote Link to post Share on other sites
_DW_ 628 Posted January 29, 2020 Share Posted January 29, 2020 2 hours ago, fredrick said: I spoke too soon though. Got my phone yesterday, then went and got my old n97 from the basement. They both have the same issue. A small gap. And i actually remember the extra noise noise the phone made each hard tap i made. Were can one get that felt tape? Any recommendations? (I live in sweden) I spotted mine the other week my son was messing with it i'll have to see if he remembers where he put it Quote Link to post Share on other sites
EskeRahn 5,421 Posted January 29, 2020 Share Posted January 29, 2020 5 hours ago, fredrick said: I spoke too soon though. Got my phone yesterday, then went and got my old n97 from the basement. They both have the same issue. A small gap. And i actually remember the extra noise noise the phone made each hard tap i made. Were can one get that felt tape? Any recommendations? (I live in sweden) Well ebay is the easy choice "Self adhesive felt" But for a physical store I would ask somewhere they sell either a DIY-stuff, silverware, jewels or furnitures, as it is often used in drawers for cutlery or jewel boxes. (though here often in red or green) 1 Quote Link to post Share on other sites
OliverTypes 152 Posted January 29, 2020 Share Posted January 29, 2020 Already bookmarked me some 0,5mm silicone tape in case ever get my device 😆 I would rather use something with a closed surface that is less likely to accumulate particles. It seems to be an easy fix that should be implemented at the production level for future runs. Just look at the E7 some more. That one didn't rattle so fxtec can get there too. 2 Quote Link to post Share on other sites
EskeRahn 5,421 Posted January 29, 2020 Share Posted January 29, 2020 1 hour ago, OliverTypes said: Already bookmarked me some 0,5mm silicone tape in case ever get my device 😆 I would rather use something with a closed surface that is less likely to accumulate particles. It seems to be an easy fix that should be implemented at the production level for future runs. Just look at the E7 some more. That one didn't rattle so fxtec can get there too. Have you got a link by any chance 🙂 Quote Link to post Share on other sites
lameboyadvance 98 Posted January 29, 2020 Share Posted January 29, 2020 All the local felt tape is super thick stuff made for furniture. This 0.5mm tape might be what I'm after to soften my clacking... 1 Quote Link to post Share on other sites
EskeRahn 5,421 Posted January 29, 2020 Share Posted January 29, 2020 8 minutes ago, lameboyadvance said: All the local felt tape is super thick stuff made for furniture. This 0.5mm tape might be what I'm after to soften my clacking... I just ordered some of these 1 Quote Link to post Share on other sites
OliverTypes 152 Posted January 29, 2020 Share Posted January 29, 2020 Sure. Found on Amazon Germany: Number 1: better price Number 2: better presentation Popping by and hardware store should also do it. Your local Mom&Pop migth even sell you a short piece for a much better price. Quote Link to post Share on other sites
OliverTypes 152 Posted January 29, 2020 Share Posted January 29, 2020 (edited) 2 hours ago, EskeRahn said: I just ordered some of these Those look great, too! Also available via ebay.de. They are in Shenzen though. Tell you what, I'll turn this into a challenge: Pro1 or Strap, which will arrive first? Strap seller estimates late February to early April 😅 Edited January 29, 2020 by OliverTypes addition 2 Quote Link to post Share on other sites
david 921 Posted January 30, 2020 Share Posted January 30, 2020 (edited) 9 hours ago, EskeRahn said: I just ordered some of these Found it on USA ebay too. Same source, however, so still a long delay. https://www.ebay.com/itm/Black-Silicone-Rubber-Strip-Self-Adhesive-Seal-Gasket-300x10-20-30x0-5-1-2-3mm/333378056295 I'm plan on putting these on my phone case. They might also work for dampening the noise of the phone when opening. https://www.amazon.com/Dragon-Grips-Clear-Hexagons/dp/B07DD5XRXF Edited January 30, 2020 by david 1 Quote Link to post Share on other sites
YelloDumpling 23 Posted February 19, 2020 Share Posted February 19, 2020 My pro1 just started doing this yesterday. I had to work on some machines underneath; When I went down and got on my knees, I heard a slight crack noise but didn't think anything of it. Well, not I know what it was. Part of me.. heck, ALL of me does not think this is by design. It's putting me off on the build quality, as if the software couldn't be hassle enough sometimes. I guess you must REALLY want a keyboard to put up with this phone. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.