Wasmachineman_NL 99 Posted July 7, 2020 Share Posted July 7, 2020 (edited) I tried filming my WT745 earlier tonight but I noticed I can't film with stereo audio for some reason, and the audio itself is very quiet. Wat do? Edited July 7, 2020 by Wasmachineman_NL 1 Quote Link to post Share on other sites
Wasmachineman_NL 99 Posted July 9, 2020 Author Share Posted July 9, 2020 Bump, I guess. Quote Link to post Share on other sites
Wasmachineman_NL 99 Posted July 13, 2020 Author Share Posted July 13, 2020 (edited) So I guess there's no fix for this and the Pro1 is just a broken POS software wise? Good thing I never retired my N900 because even that thing is far less buggy than the Pro1. Edited July 13, 2020 by Wasmachineman_NL Quote Link to post Share on other sites
tdm 2,322 Posted July 13, 2020 Share Posted July 13, 2020 12 hours ago, Wasmachineman_NL said: So I guess there's no fix for this and the Pro1 is just a broken POS software wise? Good thing I never retired my N900 because even that thing is far less buggy than the Pro1. I can't say much about stereo recording, because I'm not really into that. But I can say the software is .. well .. let's just say rather unpolished and leave it at that. But the hardware is generally very good. I highly recommend giving Lineage a try. It makes the software experience much better, in my (biased) opinion. 3 Quote Link to post Share on other sites
Zamasu 258 Posted July 14, 2020 Share Posted July 14, 2020 I'm pretty sure there's only 1 microphone in the Pro1, unlike the N900 which has a microphone at either end it seems? Quote Link to post Share on other sites
FlyingAntero 860 Posted July 14, 2020 Share Posted July 14, 2020 1 minute ago, Zamasu said: I'm pretty sure there's only 1 microphone in the Pro1, unlike the N900 which has a microphone at either end it seems? There are two mics on Pro1. First is next to the charging port and second is next to the camera module. On 7/8/2020 at 1:40 AM, Wasmachineman_NL said: I tried filming my WT745 earlier tonight but I noticed I can't film with stereo audio for some reason, and the audio itself is very quiet. Wat do? Make sure that you have not covered mics during filming. If you are using a case check that the mic next to the camera is not covered. 1 2 Quote Link to post Share on other sites
EskeRahn 5,421 Posted July 14, 2020 Share Posted July 14, 2020 2 hours ago, FlyingAntero said: There are two mics on Pro1. The mic placement is clearly intended for noise-reduction. And I have no idea if the mics are handled as individual mics and the noise-reduction are done software-wise, OR if it is some chipset function using two physical mics, but only giving one mono stream of input to the system. I would not be surprised if the second was the case. Anyone knows? @tdm ? 1 Quote Link to post Share on other sites
tdm 2,322 Posted July 14, 2020 Share Posted July 14, 2020 3 hours ago, EskeRahn said: The mic placement is clearly intended for noise-reduction. And I have no idea if the mics are handled as individual mics and the noise-reduction are done software-wise, OR if it is some chipset function using two physical mics, but only giving one mono stream of input to the system. I would not be surprised if the second was the case. Anyone knows? @tdm ? The msm8998 is definitely capable of stereo recording. But I don't know how the Pro1 has it wired up. You would probably have to ask @Waxberry. 1 Quote Link to post Share on other sites
Wasmachineman_NL 99 Posted July 25, 2020 Author Share Posted July 25, 2020 (edited) Look at this shit: I paid nearly €700 for this thing and I have to put up with broken as hell software with problems like not being able to record with proper sound or spontaneous reboots. Shame on you Fxtec! Software QA needs to become much better if you really want to break through because most people won't tolerate bugs like this. Edited July 25, 2020 by Wasmachineman_NL Quote Link to post Share on other sites
Craig 1,435 Posted July 25, 2020 Share Posted July 25, 2020 It's a 21 minute long video, what exactly are we supposed to be looking for? 1 3 Quote Link to post Share on other sites
Wasmachineman_NL 99 Posted July 25, 2020 Author Share Posted July 25, 2020 10 minutes ago, Craig said: It's a 21 minute long video, what exactly are we supposed to be looking for? Sound being borderline unhearable. I installed LineageOS and very briefly tried the camera: WOW WTF, it's miles ahead of the factory camera! 3 Quote Link to post Share on other sites
Craig 1,435 Posted July 25, 2020 Share Posted July 25, 2020 Yeah snapdragon camera has lots of issues. I watched a bit and was wondering if maybe it had to do with it seemed to sometimes keep trying to refocus. But yeah not much sound going on that I noticed. Lineagecamera is fine, yep. Another alternative for stock or Lineage is OpenCamera. It even recognizes our focus and shutter buttons. Although if you're trying to use the button with stock you'll need a 3rd party app to prevent the camera button from auto-launching snapdragon app, one of the many other problems with stock that were reported last year..... 2 Quote Link to post Share on other sites
daniel.schaaaf 177 Posted July 29, 2020 Share Posted July 29, 2020 Am I guessing correctly when I point to noise reduction? Some days ago I recorded a video on a construction site. The noise reduction converted most of the "background noise" to silence. Sometimes it "failed" and actually recorded sound as well. The result was a video that barely had audible sound, even at high volume, and intermittent bursts of eardrum piercing noise. The snapdragon camera is the worst camera app I have seen in my life Quote Link to post Share on other sites
Wasmachineman_NL 99 Posted July 30, 2020 Author Share Posted July 30, 2020 (edited) Still not great, but miles ahead of the stock Android camera. And I forgot to set it to 4k, LoL EDIT: Strange, I can't film in 4k with LineageOS. Edited July 30, 2020 by Wasmachineman_NL Quote Link to post Share on other sites
adflau 13 Posted August 24, 2020 Share Posted August 24, 2020 On 7/29/2020 at 1:00 PM, daniel.schaaaf said: Am I guessing correctly when I point to noise reduction? Some days ago I recorded a video on a construction site. The noise reduction converted most of the "background noise" to silence. Sometimes it "failed" and actually recorded sound as well. The result was a video that barely had audible sound, even at high volume, and intermittent bursts of eardrum piercing noise. The snapdragon camera is the worst camera app I have seen in my life I have been stalking these forums hoping for a fix for the audio recording but seemingly no signs of interest - when recording video it can't seem to handle a room with both background music and people talking. It's becoming too difficult to overlook family videos and Zoom meetings that don't sound like static with intermittent screeching. It breaks my heart because of this, poor volume control, and the earpiece easily losing physical connection, I am looking for a new phone now. On the other hand, everything else about the phone has been great...except everything audio related...for a phone... Quote Link to post Share on other sites
daniel.schaaaf 177 Posted August 25, 2020 Share Posted August 25, 2020 22 hours ago, adflau said: ... I am looking for a new phone now. You might want to investigate 3rd party camera apps first I cannot recommend any, since I rarely record video and the issue is not urgent to me. But others in the forum surely can help you with suggestions 2 Quote Link to post Share on other sites
adflau 13 Posted August 25, 2020 Share Posted August 25, 2020 2 hours ago, daniel.schaaaf said: You might want to investigate 3rd party camera apps first I cannot recommend any, since I rarely record video and the issue is not urgent to me. But others in the forum surely can help you with suggestions I have tried many and unfortunately they all behave similarly - fine picture quality with poor audio. The noise reduction is seemingly only set for voicecalls when the phone is next to your ear. Perhaps someone can correct me but I assume noise reduction would behave differently or switch to different settings when on speakerphone or any other form of mic use. For the time being the phone is unable to record sounds in an ambient setting, and keeps switching between nearby/further sounds, resulting in random clicks, silence, faint and intermittent sounds. By all means I still fully support this project and appreciate the efforts this company went through to ship this product - the keyboard and performance otherwise is excellent (remoting to PCs is great!) - but until the audio is fixed the phone part of this communication device has not been reliable enough for my current needs - especially during the pandemic (work meetings with my Moto Z Play is not a thrilling compromise). 1 Quote Link to post Share on other sites
OKSun 103 Posted August 25, 2020 Share Posted August 25, 2020 It would be interesting to understand if this is a software issue or hardware issue. Is it any better under lineage? Quote Link to post Share on other sites
Wasmachineman_NL 99 Posted September 7, 2020 Author Share Posted September 7, 2020 So I tried OpenCamera under LineageOS: Seems better but not perfect. Quote Link to post Share on other sites
Wasmachineman_NL 99 Posted September 8, 2020 Author Share Posted September 8, 2020 (edited) Sigh. If I can't get the mic to work properly i'm just going back to my N900's camera. I did manage to film in 4k this time around though, it was a setting uncovered by enabling Camera2 API. Edited September 8, 2020 by Wasmachineman_NL Quote Link to post Share on other sites
EskeRahn 5,421 Posted September 8, 2020 Share Posted September 8, 2020 24 minutes ago, Wasmachineman_NL said: Sigh. If I can't get the mic to work properly i'm just going back to my N900's camera. I did manage to film in 4k this time around though, it was a setting uncovered by enabling Camera2 API. You need a noisier washing machine.... 😇 There seem to be some sort of cut off level so that at levels below this nothing is recorded. In some contexts that can make a lot of sense but in others not, so what is lacking is a way for the user to select this level. 1 1 Quote Link to post Share on other sites
netman 1,424 Posted September 8, 2020 Share Posted September 8, 2020 1 hour ago, EskeRahn said: There seem to be some sort of cut off level so that at levels below this nothing is recorded. In some contexts that can make a lot of sense but in others not, so what is lacking is a way for the user to select this level. The mic is very much tuned for picking up nearby voice and nothing else, I believe this can be fixed in software fairly easily but wouldn't know how off-hand. I've tried many apps to see if any of them are able to record the audio unprocessed but that doesn't seem to be the case. 1 Quote Link to post Share on other sites
EskeRahn 5,421 Posted September 8, 2020 Share Posted September 8, 2020 35 minutes ago, netman said: The mic is very much tuned for picking up nearby voice and nothing else, I believe this can be fixed in software fairly easily but wouldn't know how off-hand. I've tried many apps to see if any of them are able to record the audio unprocessed but that doesn't seem to be the case. If used hand held (and that is not uncommon for a phone) fumbling with the device it self will unavoidably cause some noise, and my guess is that is the reason for the cut off. But sure it could make sense to give the user more control. It could be the same cut-off level that make the device hard to use for hands free calls, unless you raise your voice to 'meeting level'. So might be deep in the microphone driver/circuitry, Quote Link to post Share on other sites
netman 1,424 Posted September 8, 2020 Share Posted September 8, 2020 16 minutes ago, EskeRahn said: If used hand held (and that is not uncommon for a phone) fumbling with the device it self will unavoidably cause some noise, and my guess is that is the reason for the cut off. But sure it could make sense to give the user more control. It could be the same cut-off level that make the device hard to use for hands free calls, unless you raise your voice to 'meeting level'. So might be deep in the microphone driver/circuitry, I don't think it's related to the circuitry at all, I believe there's (compile time) settings for this. Pretty sure it filters out faraway based on phase offset between the two microphones and has a noise gate on that too. Some phones expose the unprocessed audio as an additional audio source if I am not wrong, but this isn't the case on the Pro1. 1 Quote Link to post Share on other sites
Rob. S. 1,643 Posted September 8, 2020 Share Posted September 8, 2020 (edited) 4 hours ago, EskeRahn said: There seem to be some sort of cut off level so that at levels below this nothing is recorded. In some contexts that can make a lot of sense but in others not, so what is lacking is a way for the user to select this level. I confess I rarely shoot video with phones, but I would expect such a noise suppression feature, if available, to be activated for voice calls, but never for video recording... There shouldn't anything at all be cancelled out... Edit: Tried it again with my Moto Z3 Play – unfortunately, it does it, too, although the cutoff level seems very low... Edited September 8, 2020 by Rob. S. 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.