Ilrilan

Already have locked. Now i need only restore all previous apps and settings - not big problem

Have flashed persist.img now. For doing it i need first unlock bootloader (and unlocking is full wipe), then flashing persist, then lock again - with unlocked BL Google pay doesn't work 😞 But, now i has worked fingerprint! Thanks

This thread? If yes - i have this fastboot files, but sadly, we haven't persist.img file in QX1000_user_20191028191838_0a493a1_Fastboot.rar archive.

I have no fingerprints stored after reboot. Then, i add some new fingerprints, use it some time, then reboot phone - and hasn't any fingerprints again. What else need I do to fix this bug? Have tried to add fingerprints, then manually remove, then add others - same state, all is lost after first reboot

After updating firmware to 20200825 fingerprints are lost after first reboot, as on previous firmware versions. Has anyone this fix works?

Will be great if keyboard backlight can be enabled on each key press with opened slider.

My phone is from clove.co.uk too, have try to lift screen now with nails on each edge and all corners - now, i can't, and there isn't any gaps, looks like monolith element with case, despite the fact that my device already was disassemlbed in the phone service some days ago.

Yes. All this files are clear stock images, not patched by Magisk. You need patch they in your own phone, then Magisk correctly create backups, and can after that restore stock boot.img for applying new OTA update - if you get magisk_patched.img from anywhere other source and flash by fastboot, "Restore images" button will not work.

Had you try this app? It also can adjust different volume with connected headset/without it

All boot.img are now in thread about magisk, on following updates i'll upload boot images to the same Google drive folder. After installing all OTA i have a bug: fingerprints are lost after each reboot 😞

If someone need - i upload to google drive stock versions of boot.img, backuped by Magisk from all versions i had: - 20191028 - 20191111 - 20191129 - 20191210 - 20200106 https://drive.google.com/drive/folders/1EHlG9ZWNMimAN55yKDvMUUE_ow-FDznG?usp=sharing

I try, and on uninstall magisk says " backup is missing". Device is rooted by flashing patched boot.img with adb, following guide from first post in this topic. UPD: had restored stock firmware to 20191028 from here - after all updates can't root. UPD2: had restored stock 20191028 again, trying to start OTA with Magisk rooted from this version. For doing "Restore images" you need patch stock boot.img by Magisk on your own phone, and not load already patched magisk_patched.img from anywhere, how i do by guide form first post. Sucessfully install first OTA update with

Very common service "we can repair Samsung, Nokia, iPhone, Xiaomi, or any other mobile phone/tablet/gadjet", i don't think that in Russia i can find special FX Tec specialists. Serviceman says that "inner slider mechanism and disassemblying is like old Nokia n9, nothing very difficult".

Thanks. Yes, problem was in selecting "US" layout in default driver for qwerty layout. I'll look at FinQerty too - haven't used it before, i used ExternalKeyboard for creating custom layouts.

Can't find, how can i type "?" and "/" on Pro1 keyboard. Yellow symbols are here: But it's buttons "l" and "p". Other yellow symbols typed with shift (f.ex. 9 is "9", shift+9 is "("). But this buttons with shift are "L" and "P". How must it work?.. I can write my own layout with ExternalKeyboard, but must be more simple way.

Yes. Slider mechanism can't be watertight, so Pro1 can't be full waterproof. I just want to protect it from small water drops in closed state - closing holes on the cover can be something better, than do nothing.

Or may be it's more simple just find tight silicon case, which can protect all holes from liquids. It's not so radikal solution, as disassembly and glueing.

I think, it's not so easy if you want to get water resist without any trade-off. You can't just fill 3.5mm jack with sealant - because socket will not work then. You can't glue micro/dynamic holes with plastic tape, because it will degrade sound quality. When you sell the phone, all parameters must be "new, perfect". But i don't need 3.5mm jack, and don't need great sound quality - if i want listen music, i'll connect bluetooth. Then i can't simple fill all holes with sealant, knowing that i don't want to sell the phone later.

Morning i took phone to the nearest service center - it was disassembled here. All connection loops where in salt and green oxide, after cleaning with Kontaktreiniger (Liqui Moly) and assembling it works now. Thanks God, electronics wasn't damaged by short curcuits. Serviceman said that all inner plate connectors are opened and vulnerable to water, and there are lot of holes in cover case - dynamic, microphone, sim-slot... now i try to find as tight silicon case, as it possible. May be glueing with silicon sealant unused holes - f.ex, i dont need 3.5mm jack, because of using bluetooth headset.

Phone was closed. And yes, unfortunately, as said EskeRahn, with big chance it was salt water, not pure - road workers often pour salt and sand to the snow on the roads.

Phone doesn't react to Power button. Now it is turned off - but i don't try to disassembly myself without manuals, it is very easy to broke more, for example damage connection loops. Great vulnerability to the water is very unpleasant - it wasn't falling to the toilet or water stream. No, just few drops on the coverage for some seconds.

Today my pro1 fell on rubber floor mat in a car with small amount of water - melted snow from boots. Now it don'react to the power button pressing, don't charge. Have asked support, what can i do - may be there is disassembly guide for cleaning it inner. Or only one variant is sending to.Europe for repairing?.. Yes, i know that water damage isn't warrantly coveored case.

Have received my qwerty version. Serial number 135, ordered from Clove. Need some work with settings, apps, layout - but in all, good device

Have received phone from Clove store to the resender storage in UK. Now i wait photo/video of power on/packaging, then sending to my address.

I'll post here later any information about shipping progress from Clove.