archseraphim 50 Posted February 6, 2020 Share Posted February 6, 2020 Tried to pair my Pro1 with my car's handsfree bluetooth and ran into issues. The pairing appears successful on the phone side but just waits forever and eventually times out on the car's console. The car appears in the pro1's "previously connected devices" list, and the pro1 is listed by the cars pairing menu as a paired device, but it won't ever connect. When I'm in the car the bluetooth screen on the pro1 just says "connecting..." forever under the vehicle handsfree device. Handsfree system lists "Phone Calls", "Media Audio", and "Contact Sharing" as available services. I've successfully connected my watch (Phone Calls, Input Device, Contact Sharing), and a set of bluetooth headphones (Phone Calls, Media Audio, Contact Sharing), with no issue at all. Has anyone else encountered a similar problem or have a solution? 1 Quote Link to post Share on other sites
sequestris 710 Posted February 6, 2020 Share Posted February 6, 2020 Yes. With my first device. It was, sadly, unfixable. It just kept dropping even though it showed that it was there. Second phone just worked instantly. 11 hours ago, archseraphim said: Has anyone else encountered a similar problem or have a solution? 3 Quote Link to post Share on other sites
archseraphim 50 Posted February 7, 2020 Author Share Posted February 7, 2020 (edited) Well that's disheartening. How did you go about getting a replacement device? edit: And I've just discovered my headphones have stopped working, though they were fine two days ago when I first got my Pro1. I've installed some updates since then, so it seems one of them broke something. Edited February 7, 2020 by archseraphim 1 Quote Link to post Share on other sites
_DW_ 628 Posted February 7, 2020 Share Posted February 7, 2020 7 hours ago, archseraphim said: Well that's disheartening. How did you go about getting a replacement device? She actually sold it then decided to buy another one 😂 1 Quote Link to post Share on other sites
_DW_ 628 Posted February 7, 2020 Share Posted February 7, 2020 7 hours ago, archseraphim said: Well that's disheartening. How did you go about getting a replacement device? She actually sold it then decided to buy another one 😂 Edit: Did you apply all the updates? 1 1 Quote Link to post Share on other sites
archseraphim 50 Posted February 7, 2020 Author Share Posted February 7, 2020 Everything that I've been prompted to install. Is there a way to confirm I have everything? 1 Quote Link to post Share on other sites
Craig 1,435 Posted February 7, 2020 Share Posted February 7, 2020 Check the date code in your version, in settings/about somewhere. If its 2020-01-06 I think that's the lastest. You could also check for updates, it'll tell you then if there are any more. 1 Quote Link to post Share on other sites
archseraphim 50 Posted February 7, 2020 Author Share Posted February 7, 2020 Build number starts with 20200106, so I guess that's the latest. Hopefully another update sorts it out. 1 Quote Link to post Share on other sites
foxfreejack 60 Posted February 16, 2020 Share Posted February 16, 2020 Hi all, Today I tried to connect my Pro1 on my Pioneer AVH-4100NEX head unit, but failed with the message in the included image. Tried to reconnect a few times giving the same message, but after few times the message no longer came up. I restarted the head unit and reconnected the Pro1, the error message came up again the two time I tried to connect it. The Pro1 was freshly started a few minutes before. Pro1 is on the current firmware. The radio unit is on its latest firmware v1.11 built on December 8, 2018. Message is in french: Android Auto is not responding. To continue, disconnect the USB cable from the phone, and reconnect. 1 Quote Link to post Share on other sites
EskeRahn 5,421 Posted February 16, 2020 Share Posted February 16, 2020 Others can use Android Auto, see e.g. this or this So could be some settings or specific protocol that are teasing you? Quote Link to post Share on other sites
Slion 1,200 Posted February 16, 2020 Share Posted February 16, 2020 Android auto works just fine here but my car setup is much simplier than yours. Mostly just connecting to car audio output over bluetooth. 1 Quote Link to post Share on other sites
foxfreejack 60 Posted February 18, 2020 Share Posted February 18, 2020 The stand alone app works well, with bluetooth, no surprise here. I'll try to get debug/log messages to assess if the issue is around the head unit or the Pro1. 1 Quote Link to post Share on other sites
windraver 63 Posted February 18, 2020 Share Posted February 18, 2020 (edited) try a different cable. I had this issue with some other phones being extremely sensitive to what cable I used. My Pro1 works with 4 different heatunits I've tested on. Edit: I should also note that the usb-c port is a bit loose so in some cases, bumps will cause the cable to disconnect android auto. It could also be the cable at fault but it is my observation. Edited February 18, 2020 by windraver Quote Link to post Share on other sites
foxfreejack 60 Posted February 19, 2020 Share Posted February 19, 2020 3 hours ago, windraver said: try a different cable. I had this issue with some other phones being extremely sensitive to what cable I used. My Pro1 works with 4 different heatunits I've tested on. Edit: I should also note that the usb-c port is a bit loose so in some cases, bumps will cause the cable to disconnect android auto. It could also be the cable at fault but it is my observation. Thank you, I will try this. However the USB connector being at the back of the unit, this is no quick task. With my Z2 Force it does work all the time with the cable currently in place. In the mean time, I've captured logs while connected to my head unit, so knowledgeable people can take a look at it. While I do some programming, I've barely touched Android programming for now. 20200218-pro1-androidauto-logsextract.txt 1 Quote Link to post Share on other sites
foxfreejack 60 Posted February 27, 2020 Share Posted February 27, 2020 (edited) Hi all, I have made a test with another USB cable and it worked. But I tried to go back to the previous cable and it also worked... This said, there was a different behavior on the device: I tried right away with the new cable with my head unit, and the phone asked to allow location while Android Auto was loading. Not sure why it wasn't asking this on my first tries the other day. Once this was done, using either cable loaded AA normally. I say "normally", but I also found out that the previous cable had an issue, at least one contact isn't perfect with the Pro1, but good enough for my other device. Edited February 27, 2020 by foxfreejack 1 1 Quote Link to post Share on other sites
archseraphim 50 Posted April 1, 2020 Author Share Posted April 1, 2020 Has any one else has problems connecting to bluetooth devices with the Pro1? I have three devices I want to use. My Gear S3 smartwatch, a pair of Anker Smartcore earbuds, and my car's handsfree audio. The watch has worked pretty much without issue from day one, but connection to the earbuds is sporadic at best, and I have made exactly zero successful connections to my car. This is the only major outstanding issue I've had and I've been holding out in hopes of an update sorting it out, but f(x)tec has been quiet to the point of non-existent about what we can expect going forward. Has anyone else encountered this or have any suggestions? 1 1 Quote Link to post Share on other sites
Hook 2,940 Posted April 1, 2020 Share Posted April 1, 2020 It works fine with both my Samsung Galaxy Smartwatch and with Android Auto in my car. I don't use my phone for listening to music, so haven't tried my Sony BT headphones. What I do find is that sometimes the phone has trouble pairing with the auto when the watch is paired, but not always. I should try and sort it out better, but especialy since I'm not using my car as much as I used to with limited travel, I'm just turning off my watch when I get in the car. This phone is not the only phone or device I've found that has trouble sorting multiple pairings. Quote Link to post Share on other sites
Laska 41 Posted April 1, 2020 Share Posted April 1, 2020 I've paired my pro1 with 2 speakers set, 3 computers and my car. All connections workiking flawless and there is even obex ftp protocol wich I haven't saw since symbian days. :) Quote Link to post Share on other sites
archseraphim 50 Posted April 1, 2020 Author Share Posted April 1, 2020 Hrm... I gave the "one device at a time" theory a try and at first seemed to be working. My headphones connected no problem after disconnecting my watch. But then I turned off my headphones and they failed to connect at all when I turned them back on again. Watch reconnected with no issue afterwards. Quote Link to post Share on other sites
PC_ 61 Posted April 2, 2020 Share Posted April 2, 2020 (edited) Mine works fine with a bluetooth mouse with no issues. My car's handsfree audio is a whole different story. Whilst it seems to connect to the car's system in that it shows my contacts information, phone history and I can instigate a phone call via the car's system, when making a call, the audio doesn't consistently transfers to the car's system. The annoying thing about it is that I can't tell if it's going to work or not until I make the call. Even if the phone is connected and the audio is transferred successfully at the start of a journey, if I make a call later in the journey it may not transfer the audio. I also have issues when trying to dictate text or liten to text messages through Google Assistant. My car is a 2017 BMW which doesn't include Android Auto. All these functions worked without issue with my Priv. I too would like some kind of acknowledgement that this is an issue F(x)Tec are aware of and looking in to. Edited April 4, 2020 by PC_ 1 Quote Link to post Share on other sites
VaZso 1,997 Posted April 2, 2020 Share Posted April 2, 2020 Anyway, it works well using my KMM-303BT receiver. (It doesn't mean it works on every receivers but it works on this specific one.) Handsfree mode and also audio playback function work well. Anyway, someone wrote here about some (lincence?) problem exists for a protocol which may be related. Quote Link to post Share on other sites
archseraphim 50 Posted April 3, 2020 Author Share Posted April 3, 2020 Finally had a chance to try again with my car handsfree while not connected to another device (not much need for me to drive around lately :P). Did not make a difference, still doesn't connect properly. Much like @PC_ my car's bluetooth is a simple media/handsfree device, no Android Auto capability. Quote Link to post Share on other sites
VaZso 1,997 Posted April 3, 2020 Share Posted April 3, 2020 40 minutes ago, archseraphim said: Did not make a difference, still doesn't connect properly. Much like @PC_ my car's bluetooth is a simple media/handsfree device, no Android Auto capability. Anyway, someone wrote here earlier about a problem with car bluetooth receiver because of too many learnt devices. So it may help if you could delete older, unused devices from receiver's memory. 1 Quote Link to post Share on other sites
PC_ 61 Posted April 4, 2020 Share Posted April 4, 2020 8 hours ago, VaZso said: Anyway, someone wrote here earlier about a problem with car bluetooth receiver because of too many learnt devices. So it may help if you could delete older, unused devices from receiver's memory. I still have my Priv configured on the car's bluetooth but no other devices. Quote Link to post Share on other sites
ivoanjo 33 Posted April 4, 2020 Share Posted April 4, 2020 I've definitely felt the issues coming from a Galaxy Note 8 where it worked flawlessly. I use both an Echo dot "alexa" and a taotronics device (turns my 3.5mm headphones into Bluetooth ones) and I get issues very often -- devices are not able to connect, especially *after* previously connecting and disconnecting to the devices. Going to the Bluetooth settings and manually clicking to connect to the devices does nothing. What I've found that works a lot of the time is toggling the Bluetooth on the Pro1 off and on again. This usually restores functionality, and it can connect again. But of course, it's mega awkward -- now rather than just being able to turn the Bluetooth devices on / ask alexa to connect, I also need to fiddle with the phone. On the other hand, I do have a Samsung Gear Fit2 Pro smartwatch, and that one works flawlessly on the Pro1. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.