daniel.schaaaf 177 Posted October 7, 2020 Share Posted October 7, 2020 On 10/5/2020 at 8:57 PM, tdm said: @daniel.schaaaf the response that @Gigadoc2 has above is spot on. I would only add that instead of requesting changes in the OS to accommodate older apps, it is much better to use updated apps. Unmaintained apps can be a security risk. I know that is not always desirable or even possible, but it will surely be the official position of both Lineage and Google for this issue. Too bad, I really despise the way Google slowly turns Android into iOS @tdm Is vold prone to (frequent) important changes? I am thinking of compiling vold with a modified PublicVolume.cpp and replacing the binary with a Magisk module (like vold-posix).and Also: Thank you very much for providing LOS. The ROM works better than the original Pro1 Android Quote Link to post Share on other sites
claude0001 1,341 Posted October 7, 2020 Share Posted October 7, 2020 (edited) Hello community! First of all: Many thanks (mostly to @tdm I guess) for providing LOS -- I think it is the most useful and polished OS for the Pro1 by quite some margin. After trying, both, Stock and SFOS, I have used LOS exclusively on my device almost since day 1. My (small) problem: Even though this is supposed to be fixed, it still happens to me that the keyboard backlight switches off, and can be re-enabled only by sliding the keyboard in- and out. I notice this mostly when using Microsoft's "Remote Desktop 8" app (although I do not think the issue is related to the app). I use RDP to connect to a chrooted Debian Linux on the device. If I leave the device idle (usually while connected to USB power), *sometimes* the keyboard backlight switches off after a while, and does not re-enable on the next key-press (as I would expect), even though the environment is quite dark (so that typing without backlight is difficult). I would love to provide more detailed debugging information, but unfortunately the problem is not straightforward to reproduce. Understanding the logics of the backlighting would help: is it true that the backlight should switch on (if it isn't already) when a key is pressed and the ambient lighting is dim? If yes then I surely encounter a bug here. Edited October 7, 2020 by claude0001 1 Quote Link to post Share on other sites
silversolver 849 Posted October 8, 2020 Share Posted October 8, 2020 12 hours ago, daniel.schaaaf said: Also: Thank you very much for providing LOS. The ROM works better than the original Pro1 Android I just received mine today and after using LOS on my Droid 4 for many years, I was shocked, dismayed, and disgusted to find that Google was in every corner of my new device! I came here to find the solution, and haven't been disappointed. LOS on P1 coming soon to a desk near me. :) 5 Quote Link to post Share on other sites
raymo 177 Posted October 8, 2020 Share Posted October 8, 2020 I'm curious, I notice that internet (switching between wifi/4g) works perfect, also wifi has more connectivity power (it wasn't the case 1 month early). Could it be a link with LOS updates ? Anyway, I'm more and more pleased with this keyboarded piece of hardware 😄 3 Quote Link to post Share on other sites
silversolver 849 Posted October 9, 2020 Share Posted October 9, 2020 So I'm now using the klack with LOS to post this. I have not activated it yet since I can't make any major changes to my routine yet and Verizonk is a butthole. I've pretty much decided to use my D4 until it Zonk kills it because I hate change and am still learning klack ergonomics. I have found some things about the hardware that I wish were different, but nothing that I can't accommodate. This is not the place to discuss that. I have not found any deficiencies in the software, although so far I'm only using it as a UMPC. I do wonder if the updater works, or is just an unused feature at this point. Quote Link to post Share on other sites
Hook 3,022 Posted October 9, 2020 Share Posted October 9, 2020 4 minutes ago, silversolver said: I do wonder if the updater works, or is just an unused feature at this point. The updater works but is very slow. I can vouch on the slow part. I bailed on my only attempt to do it because it was taking so long even though it was a background process and I could still use it. I prefer the speed and (for me) simplicity of downloading the nightly and doing an adb sideload from my computer. 1 Quote Link to post Share on other sites
silversolver 849 Posted October 9, 2020 Share Posted October 9, 2020 39 minutes ago, Hook said: The updater works but is very slow. I can vouch on the slow part. I bailed on my only attempt to do it because it was taking so long even though it was a background process and I could still use it. I prefer the speed and (for me) simplicity of downloading the nightly and doing an adb sideload from my computer. Thank you for the clarification. Sideloading the firmware is settings and data non-destructive I assume. Quote Link to post Share on other sites
Hook 3,022 Posted October 9, 2020 Share Posted October 9, 2020 1 minute ago, silversolver said: Thank you for the clarification. Sideloading the firmware is settings and data non-destructive I assume. Correct. Just make sure you reboot to recovery after sideloading the new nightly so that you switch the slot it was actually installed to. Quote Link to post Share on other sites
silversolver 849 Posted October 9, 2020 Share Posted October 9, 2020 43 minutes ago, Hook said: Correct. Just make sure you reboot to recovery after sideloading the new nightly so that you switch the slot it was actually installed to. I don't have to reboot to recovery to sideload? That's interesting. If I don't it goes in the inactive slot, but if I do it goes to the active one, or both? I'm cornfused. Quote Link to post Share on other sites
Hook 3,022 Posted October 9, 2020 Share Posted October 9, 2020 1 minute ago, silversolver said: I don't have to reboot to recovery to sideload? That's interesting. If I don't it goes in the inactive slot, but if I do it goes to the active one, or both? I'm cornfused. Yes, you sideload from recovery. But then you use the advanced menu in Lineage Recovery to Reboot to recovery. That switches to and makes active the slot where the update was installed. The clearest instructions are @tdms. They were written for the test versions, but they work fine for the official nightlys. http://files.nwwn.com/android/pro1/lineage.html 1 Quote Link to post Share on other sites
jamescarruthers 37 Posted October 9, 2020 Share Posted October 9, 2020 On 10/5/2020 at 11:19 PM, tdm said: First, backup your boot image. If you are on official Lineage, this is the same file that is publish as the recovery. So you can just use that as your backup. Next, download my image and run something like this: adb reboot bootloader fastboot flash boot <image-name> fastboot reboot That's it! Great, thanks, I will have a look at this. Believe it or not I don't know how to do any of that or how to input terminal commands... but I can learn c/o t'internet Quote Link to post Share on other sites
tdm 2,322 Posted October 10, 2020 Author Share Posted October 10, 2020 On 10/7/2020 at 1:50 AM, DieBruine said: Just curious... Any news on this front? @npjohnson says it boots and many things work. The two biggest things to fix are radio and camera. 2 Quote Link to post Share on other sites
tdm 2,322 Posted October 10, 2020 Author Share Posted October 10, 2020 On 10/7/2020 at 5:20 AM, daniel.schaaaf said: Too bad, I really despise the way Google slowly turns Android into iOS @tdm Is vold prone to (frequent) important changes? I am thinking of compiling vold with a modified PublicVolume.cpp and replacing the binary with a Magisk module (like vold-posix).and Also: Thank you very much for providing LOS. The ROM works better than the original Pro1 Android No, vold mainly stays the same during a given release cycle. 1 Quote Link to post Share on other sites
tdm 2,322 Posted October 10, 2020 Author Share Posted October 10, 2020 (edited) On 10/7/2020 at 1:06 PM, claude0001 said: Understanding the logics of the backlighting would help: is it true that the backlight should switch on (if it isn't already) when a key is pressed and the ambient lighting is dim? If yes then I surely encounter a bug here. IIRC, the keyboard backlight should always be on if, and only if, both the display is on and the slider is out. The keyboard backlight code (and LED light code) is here: https://github.com/LineageOS/android_device_fxtec_pro1/blob/lineage-16.0/light/Light.cpp Edited October 10, 2020 by tdm 1 2 Quote Link to post Share on other sites
EskeRahn 5,460 Posted October 12, 2020 Share Posted October 12, 2020 (lineage-16.0-20201012-nightly-pro1-signed.zip including Ocotber security patch installed smoothly using sideload, with and without addonsu) 3 Quote Link to post Share on other sites
Wheeljack 212 Posted October 12, 2020 Share Posted October 12, 2020 No issues with the OTA update either. 1 Quote Link to post Share on other sites
DieBruine 397 Posted October 13, 2020 Share Posted October 13, 2020 12 hours ago, Wheeljack said: No issues with the OTA update either. How about Casper the keyboard? 👻 Quote Link to post Share on other sites
raymo 177 Posted October 13, 2020 Share Posted October 13, 2020 Quote How about Casper the keyboard? 👻 ouch ! He is back ! @tdm Should I flash the keyboard test *.img ? This is really annoying seeing this weird keyboard back... 1 Quote Link to post Share on other sites
jamescarruthers 37 Posted October 13, 2020 Share Posted October 13, 2020 (edited) On 10/5/2020 at 10:19 PM, tdm said: First, backup your boot image. If you are on official Lineage, this is the same file that is publish as the recovery. So you can just use that as your backup. Next, download my image and run something like this: adb reboot bootloader fastboot flash boot <image-name> fastboot reboot That's it! On 10/5/2020 at 10:19 PM, tdm said: First, backup your boot image. If you are on official Lineage, this is the same file that is publish as the recovery. So you can just use that as your backup. Next, download my image and run something like this: adb reboot bootloader fastboot flash boot <image-name> fastboot reboot That's it! I've messed this up big style! [url=https://postimages.org/][img]https://i.postimg.cc/Wp0vgWcx/Untitled.png[/img][/url] It rebooted to a screen with Lineage logo and RECOVERY at the top. In red it says: "Can't load Android system. Your data may continue to get this message, you may ne factory data reset and erase all user da device" [the above makes no sense as I assume the message is too wide ot fit on the screen] I have the option to "Try again" or "Factory data reset" Is there a way back from this mess I have made? Edited October 13, 2020 by jamescarruthers Quote Link to post Share on other sites
jamescarruthers 37 Posted October 13, 2020 Share Posted October 13, 2020 Then I thought that this might help.... but it didn't! Soime help would be greatly appreciated as I've basically wrecked my phone unless someone can give me a hand Quote Link to post Share on other sites
EskeRahn 5,460 Posted October 13, 2020 Share Posted October 13, 2020 7 minutes ago, jamescarruthers said: Soime help would be greatly appreciated as I've basically wrecked my phone unless someone can give me a hand I bet it is a matter of setting the right slot active before flashing - your data should still be there. I use this script, to help me remember what to do... With the images as parameters 1 and 2, e.g. LineageFLASH.BAT LineageOS\lineage-16.0-20201012-recovery-pro1.img LineageOS\lineage-16.0-20201012-nightly-pro1-signed.zip @ECHO off if %1.==. goto :EOF ECHO * Wait for boot to bootloader to finish (or do manually holding VolDown+Power) adb reboot bootloader pause fastboot flash boot_a %1 fastboot --set-active=a REM fastboot reboot recovery does not work, so do manually: ECHO * Roll down to "Recovery Mode" with VolDown, and press Power to select. ECHO * Await recovery boot. Select "Apply update", "Apply from ADB" for main flash pause adb sideload %2 TimeOut 5 /nobreak>nul ECHO * Click Advanced, "Reboot to recovery". ECHO * Await recovery boot. Select "Apply update", "Apply from ADB" to add Gapps pause ECHO * When prompted (shortly after 47%) click "yes" to "...Install anyway" adb sideload LineageOS\MindTheGapps-9.0.0-arm64-20190615_031441.zip TimeOut 5 /nobreak>nul if /I NOT %3.==ROOT. goto :NORM ECHO * Click Advanced, "Reboot to recovery". ECHO * Await recovery boot. Select "Apply update", "Apply from ADB" to add ROOT pause adb sideload LineageOS\addonsu-16.0-arm64-signed.zip TimeOut 5 /nobreak>nul :NORM ECHO * Click Reboot. ECHO **DONE** Should now boot into LineageOS Quote Link to post Share on other sites
jamescarruthers 37 Posted October 13, 2020 Share Posted October 13, 2020 this literally blows my tiny little mind! Quote Link to post Share on other sites
jamescarruthers 37 Posted October 13, 2020 Share Posted October 13, 2020 what are parameters 1 & 2? lineage-16.0-20201012-nightly-pro1-signed.zip and lineage-16.0-20201012-recovery-pro1.img Quote Link to post Share on other sites
EskeRahn 5,460 Posted October 13, 2020 Share Posted October 13, 2020 1 minute ago, jamescarruthers said: this literally blows my tiny little mind! The crucial steps here are these, to start right fastboot flash boot_a [TheImageNameGoesHere] fastboot --set-active=a Quote Link to post Share on other sites
EskeRahn 5,460 Posted October 13, 2020 Share Posted October 13, 2020 1 minute ago, jamescarruthers said: what are parameters 1 & 2? lineage-16.0-20201012-nightly-pro1-signed.zip and lineage-16.0-20201012-recovery-pro1.img Updated reply with example, but yes, though in the other order, the .img first then the .zip Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.