Leaderboard

Thanks for the replies Peter and Slion, I wish I knew how the heck this got remedied without an update and the power off for 6+ weeks. Could I have forgotten to reboot and try again after the last update?! (I thought that was automatic.) Can't imagine that, but anything's possible. So glad I don't have to write keyboard code myself. Apologies, this Keyboard Mod backer is finally a fan after 2 1/2 years.

@BlindDroid I could prepare one for you and ship it if you have no better option. I have a few premium quality leather flip case from SnakeHive I could use. Trouble is I'm based in Germany so it's probably not your cheapest and fastest option. I'd just charge you the cost of the case and shipping.

You're talking about N-Key rollover, which many desktops don't even support. My advice -- as a fellow musician and fast-typist -- would be to play with the Pro1 in its present state and see what everyday problems you encounter. I haven't had problems with the keyboard since the OTA upgrade in early March. The only typos come from my own mistakes.

Slion, You are right. I concur. Let's support this team as they take on the world during an unprecedented world crisis. Luke

My Pro1 has been sitting in the box since I got it in January, hoping, praying that the horrible multi-key keyboard issue gets fixed. After about another 6 weeks, I took it out tonight, and there is still no software update that fixes it. I'm a virtuoso musician and lightning-fast typist that simply can't use this device as it is because it doesn't respond correctly if the last key doesn't get released before the next key is pressed, which is an absolutely unacceptable problem. Try this... Hold the letter A and then quickly press every other key and see if it got the next letter correctly. Th

If you download split apk installer from play store it will install the disney + app, I downloaded the 3 files in zip form from android sage, not sure if I'm allowed to put that name in here, so sorry if I've got it wrong. My phone is as out of the box with one ota update.

Hey Guys, I didn't get to work on this at all this week. I'm sorry. The good news is that I ordered a batch of PCTPE. This is a flexible rubber like material. I'll see if my design will work with this material and if not I'll have to make a design for it. That being said, I'll have a hard case and a soft case. No guarantees for being able to work on it this week. I have a lot on my plate work wise.

The one you are looking for is the fifth from the bottom just above the one with OTG. But look out for the emergency calls test!

@BlindDroid Here are links to pictures of that case I mentioned, I'm not sure you can see them but here they are anyway: Here is again that same case from another community member: In case you can't see those pictures at all, it's basically a premium leather book case which securely closes with a magnetic strap. I'm no expert but it feels like very usable for visually impaired people.

Hello everyone, I'm hoping I'll receive my Pro1 shortly so I'm getting prepared.... I've seen some people on this forum adapt cases to fit their Pro1, and even a 3D printed case. I'm visually impaired and won't be able to reliably adapt a case to my Pro1 - if I were to try making the needed cut-outs, it'd look like a disaster I'm sure. Would anyone be interested in making a compatible case for me and I'll pay for the case + shipping + time (I'm in Winnipeg, Canada)? I'd be interested in any standard hard-shell or soft-shell cases as long as it had a decent fit and all buttons

I would gladly help by sending you one, but as shipping from Denmark is pretty absurdly priced, I hope someone else closer by can help you out. It is really easy to modify a shell type of case for "Huawei P20 Pro" , so you could have anyone around you do it. It does not require much. For a soft silicon case, I would say 5-10 minutes with a pair of scissors. I have used the small scissors in a Swiss army knife for the dozen or so I've cut If you got a friend that can do it for you, i have explained it in quite a lot of details and pictures in this post: https://eskerahn.dk/?p=3620

It could be that you last time tried inside a program that tries to interact with the keyboard a little too smart. I think I recall some have reported specific keyboard issues in specific apps - can not recall neither the issues nor the app, sorry. Check the date of the update you got. The last update is from the first week of March and thus quite close to the 6 weeks ago you mention.

Hmmm... I held down a+s and after that started going with my finger over the keyboard. It worked, even though I got a string of s's first. But that might be because my finger wasn't pressing it down correctly, registering a new press every so often. Works like a charm though. I do understand where your anxiety comes from though, as I had some keyboard problems myself in the beginning as well. But even the missing spacebar presses were fixed by that OTA. What a wonder of modern technology...

Just published release v0.1.0 notably with tabs recovery and back button to show tool bar.

I admit, this is Very strange. That actually does work. When I performed that test 2 months ago, it certainly did not work at all after updating the software, so back in the box it went. Today when I took it back out, I immediately looked for a software update, and there were none, so back in the box it went again, because how could anything be different? That test actually works now, yet no software update was performed. How could that be???? But I have found a similar keyboard issue which is reminiscent of the previous issue, but with 2 keys held down, not one... Try holding A

asdfghjkl' That's looking good here. I got the above by holding down 'a' and then sliding a finger across that keyboard row. Could you please describe how to exactly reproduce your problem?

elvissteinjr, I very much appreciate that info. But the latest update did not fix the keyboard issue as I described. Does anyone know if the source code for the keyboard microcontroller is available to be modified, and if so, where to find it, as I believe it is not reporting key events correctly to the OS, therefore no OS workarounds will make the Pro1 usable for serious typists. If it's not available, we'll have to beat it out of Liangchen so I can fix it, lol. Please, let's get this thing right!!!!

The issues you're talking about should be fixed in OTA update 2020-03-06. I have not had my Pro1 for almost 2 months now so I can't confirm myself, but from what I've read it should be fine now. There have been two keyboard driver programming efforts from the community already, one of which ended up in the official system update (dunno which though). You can also install Lineage if you want, which has had keyboard fixes for even longer already.

Or could the noise cancelling be reversed with the phone mic and rear mic. It makes sense to have more aggressive noise cancelling when talking on the phone.

I had exactly the same thing - run the hall sensor diagnostics and You will know if the problem is software or hardware, but looks like a hardware issue to me. You can try to push the housing here and there or gently twist the device back and forth, it worked for me for 1 day before becoming completely unresponsive to open/close. Too bad they don't have any replacements on stock, so if You send Yours on warranty You'll end up being without a phone for... who knows how long, I'm already waiting almost 2 months and something tells me there are a few more weeks to go...

...That update seems to be delayed.... 😜

Dare we ask for an update on the delay of the update on a delay?

No. She's mine. I wear a lot of black clothes so the hair doesn't show up as much. An orange cat just won't do.

Thanks for the suggestion Slion. I bought the same one. Here is the Amazon U.S.A. listing that I used. https://www.amazon.com/gp/product/B07DFP6P35 I used an Exacto knife to trim away the plastic rim that holds the phone. Very easy and now I have access to the ports. I have been using this case for a couple of days and I am very satisfied.

For me, this one (simple case made for P20 Pro) seems to be very good. It is not as rubberized anyway, but it clips slightly in at the top side of the lower part - so it holds perfectly. Especially as I have a SIM adapter on the back and some rubber pads to not sit on SIM holder while it is laying on a table - that is why it seems to be uneven at its back. However, seller sent me two types of this case (I have received two of one type and two of the other). This type has one oval hole at back, the other has three separate ones - I like this much better as I need to cut less to be