cozd 3 Posted October 30, 2019 Share Posted October 30, 2019 On 10/29/2019 at 11:05 PM, Erik said: We’re going to setup a cloudflare proxy, which should in theory bypass whatever block is causing this. Expand Now it works! On 10/29/2019 at 6:00 PM, EskeRahn said: To see if it is a wide block on a range, try this site, that has an IP quite close by: butterfly-conservation.org (This site is -hidden-, that site is -hidden-,) Expand The butterfly site opens 2 1 Quote Link to post Share on other sites
EskeRahn 5,520 Posted October 30, 2019 Share Posted October 30, 2019 There is some post-duplications. An old comment of mine from March was duplicated seven fold. Quote Link to post Share on other sites
Wasmachineman_NL 99 Posted October 30, 2019 Share Posted October 30, 2019 On 10/29/2019 at 10:01 PM, EskeRahn said: Not to sound too sarcastic, but I do assume that you read the original post in this thread? It says: But I hope that they will get it fixed soon. Expand Even pics uploaded after that date? Huh, ok then. Lemme test that real quick: Quote Link to post Share on other sites
_DW_ 628 Posted October 30, 2019 Share Posted October 30, 2019 On 10/29/2019 at 11:05 PM, Erik said: We’re going to setup a cloudflare proxy, which should in theory bypass whatever block is causing this. Expand hopefully will unblock my work as well 😄 Quote Link to post Share on other sites
Erik 1,487 Posted October 30, 2019 Author Share Posted October 30, 2019 On 10/30/2019 at 8:50 PM, _DW_ said: hopefully will unblock my work as well 😄 Expand Cloudflare is already on, so unlikely :(. I believe your work firewall is blocking the forum platform we use, which is quite popular for being an efficient distraction :). 1 2 Quote Link to post Share on other sites
Erik 1,487 Posted October 30, 2019 Author Share Posted October 30, 2019 On 10/30/2019 at 3:09 PM, EskeRahn said: There is some post-duplications. An old comment of mine from March was duplicated seven fold. Expand I think the safest thing to do right now is to delete them. Before this forum went live, we had to reimport the WPbb database 5+ times, each time flushing this forums posts table. I have no clue why it didn’t flush yours and kept them hidden. Quote Link to post Share on other sites
EskeRahn 5,520 Posted October 30, 2019 Share Posted October 30, 2019 On 10/30/2019 at 9:07 PM, Erik said: I think the safest thing to do right now is to delete them. Before this forum went live, we had to reimport the WPbb database 5+ times, each time flushing this forums posts table. I have no clue why it didn’t flush yours and kept them hidden. Expand I hope I do not have to browse through my whole comment history to look for doublets. It seems a bit unlikely that it should have happened to one single comment only. (but weeded out the six copies) Quote Link to post Share on other sites
_DW_ 628 Posted October 31, 2019 Share Posted October 31, 2019 (edited) I hadn't tried it before you turned cloudflare on. It's now working fine they probably used the same safe list for websites. Edited October 31, 2019 by _DW_ 2 1 Quote Link to post Share on other sites
Wasmachineman_NL 99 Posted October 31, 2019 Share Posted October 31, 2019 (edited) On 10/30/2019 at 5:11 PM, Wasmachineman_NL said: Even pics uploaded after that date? Huh, ok then. Lemme test that real quick: Expand Pic broke again.. EDIT: In the quote it shows up. wtf? Edited October 31, 2019 by Wasmachineman_NL Quote Link to post Share on other sites
_DW_ 628 Posted October 31, 2019 Share Posted October 31, 2019 On 10/31/2019 at 2:43 PM, Wasmachineman_NL said: Pic broke again.. EDIT: In the quote it shows up. wtf? Expand was fine when I scrolled up it does delay load them I noticed Quote Link to post Share on other sites
david 929 Posted October 31, 2019 Share Posted October 31, 2019 On 10/31/2019 at 3:15 PM, _DW_ said: was fine when I scrolled up it does delay load them I noticed Expand Yes, that is very annoying and slows down reading posts with pictures. If anything could be done about that, it would really help in reading picture-heavy threads. 1 Quote Link to post Share on other sites
Erik 1,487 Posted October 31, 2019 Author Share Posted October 31, 2019 On 10/31/2019 at 6:31 PM, david said: Yes, that is very annoying and slows down reading posts with pictures. If anything could be done about that, it would really help in reading picture-heavy threads. Expand Could you link a thread with an example of this? Typically I see an image loading placeholder for a few seconds which is the way it should be. Quote Link to post Share on other sites
david 929 Posted October 31, 2019 Share Posted October 31, 2019 On 10/31/2019 at 6:35 PM, Erik said: Could you link a thread with an example of this? Typically I see an image loading placeholder for a few seconds which is the way it should be. Expand It happened in the Case for the Pro1 and Magnetic Cables threads when I was on my phone. However, I'm on my laptop now, and didn't notice the delay. It might be a browser issue. On my phone, I saw the placeholder image, but it took longer than a few seconds for the final picture to load. I scrolled up and down trying to get it to trigger and sometimes it would take longer than 10 seconds. I didn't time it exactly. It was just longer than what I would have expected. Quote Link to post Share on other sites
Craig 1,435 Posted November 1, 2019 Share Posted November 1, 2019 It seems ignoring someone has very little affect on new posts. I ignored this guy cuz when I check unread posts, it was full of Korean nonsense, yet unread posts is still showing his stuff, albeit with a note that says it's ignored. I'd rather just not see it at all than have it noted, what's the point of ignoring his posts if I still see his posts just saying they're ignored, the reason I ignored them was so I could see if there was anything else I not from him. 1 2 Quote Link to post Share on other sites
david 929 Posted November 1, 2019 Share Posted November 1, 2019 @Craig Where is the ignore button? Quote Link to post Share on other sites
Craig 1,435 Posted November 1, 2019 Share Posted November 1, 2019 Mouseover their username and wait; ignore is an option in the box that comes up, bottom center. 1 Quote Link to post Share on other sites
Erik 1,487 Posted November 1, 2019 Author Share Posted November 1, 2019 Changed the spam settings. We shouldn't see anymore spam, but I am also afraid it will flag the good users too 😕. Let info@fxtec.com know if anyone has trouble posting. 2 2 Quote Link to post Share on other sites
netman 1,424 Posted November 2, 2019 Share Posted November 2, 2019 (edited) Linking to other forum posts appears to sometimes break for no clear reason. I'm pretty sure the post I linked to here still exists but it tells me the content is not available... edit: if this link breaks too it'd be ironic but equally useful xD Edited November 2, 2019 by netman 1 Quote Link to post Share on other sites
david 929 Posted November 4, 2019 Share Posted November 4, 2019 On 11/1/2019 at 5:13 AM, Craig said: Mouseover their username and wait; ignore is an option in the box that comes up, bottom center. Expand Ah...I was on my phone, so no way to mouse over. I see it now on my laptop. Thanks. Quote Link to post Share on other sites
dreamflasher 120 Posted November 5, 2019 Share Posted November 5, 2019 "go to topic listing" does random things on FF Android. sometimes "quote" sometimes "edit response" sometimes it actually goes to topic listing. 1 Quote Link to post Share on other sites
_DW_ 628 Posted November 5, 2019 Share Posted November 5, 2019 Just noticed a bug when typing, if you press colon the arrow keys stop working pressing shift fixes it. 1 Quote Link to post Share on other sites
_DW_ 628 Posted November 7, 2019 Share Posted November 7, 2019 I've noticed when you quote people somethings it doesn't work properly. Not figured out the scenario yet I'll update when I do. 1 Quote Link to post Share on other sites
Craig 1,435 Posted November 7, 2019 Share Posted November 7, 2019 (edited) On 11/5/2019 at 8:39 AM, _DW_ said: Just noticed a bug when typing, if you press colon the arrow keys stop working pressing shift fixes it. Expand It's something to do with emoji. For me shift didnt fix it tho, had to press ESC. Edited November 7, 2019 by Craig Quote Link to post Share on other sites
itsdevilslettuce 85 Posted November 8, 2019 Share Posted November 8, 2019 Hey all not sure if it was mentioned before, but a neat feature for the forums would be to have a custom signature. Loads of other forums have this. I think it would be great way to represent peoples timeline of physical qwerty devices or whatever else. 1 Quote Link to post Share on other sites
_DW_ 628 Posted November 8, 2019 Share Posted November 8, 2019 On 11/8/2019 at 12:51 PM, dantegi said: Hey all not sure if it was mentioned before, but a neat feature for the forums would be to have a custom signature. Loads of other forums have this. I think it would be great way to represent peoples timeline of physical qwerty devices or whatever else. Expand There is an "About Me" section in Profile -> Edit Profile (top right on desktop) 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.