Polaris 423 Posted February 18, 2020 Share Posted February 18, 2020 7 hours ago, EskeRahn said: The odd thing is that I have no real trouble with the RIGHT hand on the qwertY only the LEFT. My GUESS would be that the right side generally varies more between keyboards. Different shape of Enter, Some got a numeric keyboard right of the letter block... The left side on the other hand, there has been total agreement on since the typewriter days... So that is anchored firmer in my brain. And that the numbers are NOT shifted makes the whole thing worse, as they in my brain are misalligned with the letters... I have been using Lenovo Laptop keyboards for long, and I STILL can not find the F-keys as they are slightly smaller than the rest (6:5) so cannot just remember that F2 is just above 2. It is, but F8 is just above 7 and F11 is mid between 9 and 0, and my mind don't like that *LOL* Interesting stuff, thanks for the response. To be clear, I have no problem at all with my RIGHT hand on the qwertY. It lines up perfectly every time, it's only my LEFT where there is an issue. However, when I shift the keys to mimic the Pro1 qwertZ, then my RIGHT hand has constant trouble, but my left hand lines up perfectly every time. So for me it's the asymmetry that is leading to the problem. IMO, for thumb touch typing on a phone, I don't think that a miniature PC keyboard is the ticket since with a PC keyboard one uses fingers and thumbs. Quote Link to post Share on other sites
EskeRahn 5,421 Posted February 18, 2020 Share Posted February 18, 2020 51 minutes ago, Polaris said: Interesting stuff, thanks for the response. To be clear, I have no problem at all with my RIGHT hand on the qwertY. It lines up perfectly every time, it's only my LEFT where there is an issue. However, when I shift the keys to mimic the Pro1 qwertZ, then my RIGHT hand has constant trouble, but my left hand lines up perfectly every time. So for me it's the asymmetry that is leading to the problem. IMO, for thumb touch typing on a phone, I don't think that a miniature PC keyboard is the ticket since with a PC keyboard one uses fingers and thumbs. I almost solely use thumb-typing on the Pro1. Quote Link to post Share on other sites
Uncledingo 25 Posted February 18, 2020 Share Posted February 18, 2020 My screen doesn’t “wake up” when I’m getting a phone call. It doesn’t light up or anything. If I push the power button to wake up to screen, it ends the phone call before I can even see who it was. I can’t find anything in the basic settings for this. Is there a way to set it up so that the screen will automatically turn on when a phone call is coming in? Quote Link to post Share on other sites
EskeRahn 5,421 Posted February 18, 2020 Share Posted February 18, 2020 19 minutes ago, Uncledingo said: My screen doesn’t “wake up” when I’m getting a phone call. It doesn’t light up or anything. If I push the power button to wake up to screen, it ends the phone call before I can even see who it was. I can’t find anything in the basic settings for this. Is there a way to set it up so that the screen will automatically turn on when a phone call is coming in? Hmm. Mine does, so sounds like something conflicting. Does sliding open the keyboard wake the display as it should, or only pressing power? Quote Link to post Share on other sites
Polaris 423 Posted February 19, 2020 Share Posted February 19, 2020 (edited) 2 hours ago, Uncledingo said: My screen doesn’t “wake up” when I’m getting a phone call. It doesn’t light up or anything. If I push the power button to wake up to screen, it ends the phone call before I can even see who it was. I can’t find anything in the basic settings for this. Is there a way to set it up so that the screen will automatically turn on when a phone call is coming in? Have you checked the options for "When the screen in off" under the "Custom restrictions" menu? Mine behaved the same way until I unchecked the "Don't turn on screen." I also unchecked "Don't wake for notifications," but I think it was doing that anyway...? Edited February 19, 2020 by Polaris 2 Quote Link to post Share on other sites
Uncledingo 25 Posted February 22, 2020 Share Posted February 22, 2020 On 2/18/2020 at 3:31 PM, EskeRahn said: Hmm. Mine does, so sounds like something conflicting. Does sliding open the keyboard wake the display as it should, or only pressing power? Yes it does On 2/18/2020 at 5:45 PM, Polaris said: Have you checked the options for "When the screen in off" under the "Custom restrictions" menu? Mine behaved the same way until I unchecked the "Don't turn on screen." I also unchecked "Don't wake for notifications," but I think it was doing that anyway...? i just unchecked all of the options and it didn’t fix it Quote Link to post Share on other sites
Uncledingo 25 Posted February 24, 2020 Share Posted February 24, 2020 New update. I’m not even getting a call screen when The screen is on and open and I’m scrolling through apps. No drop down or anything. My phone just rings and there’s no way to see who’s calling or answer the call Quote Link to post Share on other sites
VaZso 1,997 Posted February 24, 2020 Share Posted February 24, 2020 31 minutes ago, Uncledingo said: New update. I’m not even getting a call screen when The screen is on and open and I’m scrolling through apps. No drop down or anything. My phone just rings and there’s no way to see who’s calling or answer the call I haven't noticed this problem, however, I use Nova launcher. ...but I have checked it in Guest mode with official launcher and it worked for me, however, it showed only a few applications in that mode. Quote Link to post Share on other sites
elvissteinjr 359 Posted February 24, 2020 Share Posted February 24, 2020 36 minutes ago, Uncledingo said: New update. I’m not even getting a call screen when The screen is on and open and I’m scrolling through apps. No drop down or anything. My phone just rings and there’s no way to see who’s calling or answer the call I've had this issue, but no idea why it defaulted to that. Well, it defaulted to a silent notification here. The solution is to go to the notifcation settings for the phone app and change the behavior for the incoming call notification back to allow screen notification (or whatever it is in the English UI). 1 Quote Link to post Share on other sites
Uncledingo 25 Posted February 26, 2020 Share Posted February 26, 2020 On 2/24/2020 at 3:04 PM, elvissteinjr said: I've had this issue, but no idea why it defaulted to that. Well, it defaulted to a silent notification here. The solution is to go to the notifcation settings for the phone app and change the behavior for the incoming call notification back to allow screen notification (or whatever it is in the English UI). This fixed it. Thank you Quote Link to post Share on other sites
EskeRahn 5,421 Posted March 6, 2020 Share Posted March 6, 2020 31 minutes ago, VaZso said: I have installed this OTA before it was suspended. Now I have tried a test Youtube video and left / right speakers are in appropriate positions However, in loudspeaker mode, it still uses bottom speaker near microphone which I think should be also changed to top one. So still there is a bug somewhere at audio routing I think. It also uses bottom speaker in handsfree mode of Linphone, so it may be also a setting somewhere which is not related directly to drive left and right speakers in normal audio playback. Maybe @Erik or @Waxberry knows who can solve it. Hmm I see this as a feature not a bug.... It can make a lot of sense to put the device on the desk with the bottom pointing towards you. It would be rather odd if the far speaker was used. And it is also dangerous if it is the one closest to the ear used, if you pick up the phone from the table during a pause in the conversation and accidentally forget it is in speaker mode... As long as they can handle any feed-back between the close speaker and microphone, it is the better option IMHO. So using the far speaker I would see as a potential workaround for handling lacking de-coupling, not as in anyway optimal. Quote Link to post Share on other sites
VaZso 1,997 Posted March 6, 2020 Share Posted March 6, 2020 1 minute ago, EskeRahn said: Hmm I see this as a feature not a bug.... It can make a lot of sense to put the device on the desk with the bottom pointing towards you. It would be rather odd if the far speaker was used. And it is also dangerous if it is the one closest to the ear used, if you pick up the phone from the table during a pause in the conversation and accidentally forget it is in speaker mode... As long as they can handle any feed-back between the close speaker and microphone, it is the better option IMHO. So using the far speaker I would see as a potential workaround for handling lacking de-coupling, not as in anyway optimal. I thought it is the desired behaviour because some of forum members are complained about noise filtering problems. If bottom speaker is the desired one for loudsfree mode, then I suggest to _also_ enable top one to have a much louder output while it is farther from the bottom microphone. Quote Link to post Share on other sites
EskeRahn 5,421 Posted March 6, 2020 Share Posted March 6, 2020 2 minutes ago, VaZso said: I thought it is the desired behaviour because some of forum members are complained about noise filtering problems. If bottom speaker is the desired one for loudsfree mode, then I suggest to _also_ enable top one to have a much louder output while it is farther from the bottom microphone. It is clearly having several issues that needs to be adjusted when used as speaker phone, as discussed elsewhere. Quote Link to post Share on other sites
VaZso 1,997 Posted March 6, 2020 Share Posted March 6, 2020 3 minutes ago, EskeRahn said: It is clearly having several issues that needs to be adjusted when used as speaker phone, as discussed elsewhere. Basically a sound output a few centimeters away of the main microphone doesn't seem to be a really good decision. Maybe if it has a really good filtering algorithm then it may distinguish its own noise and voice signal but it may not be an easy task... So I would no wonder if handsfree mode has some problems this way. I have checked my colleague's phone which also has two speakers but the opposite one is working in handsfree mode anyway. 1 1 Quote Link to post Share on other sites
lzb 43 Posted March 7, 2020 Share Posted March 7, 2020 Wasn't sure where else to put this, but I have a bit of a nitpick (and sorry if this was already mentioned elsewhere): the wifi icon has the two little UL/DL arrow icons, but when the "Do Not Disturb" icon is displayed, it shifts left and right as the wifi arrow icons come on and off. It is annoying AF. I mean, could that not have been done better? Is this something that can be fixed? 2 Quote Link to post Share on other sites
vnipicom 1 Posted March 11, 2020 Share Posted March 11, 2020 Due to the frameless display when you press the top row sometimes (or rather, very often) I touch the rounded edge of the display. In some applications there is a set of window closing, or other unexpected actions. Is it possible to limit the sensitivity of the rounded bottom of the display strip in the "open position"? Quote Link to post Share on other sites
Hook 2,940 Posted March 11, 2020 Share Posted March 11, 2020 2 hours ago, vnipicom said: Due to the frameless display when you press the top row sometimes (or rather, very often) I touch the rounded edge of the display. In some applications there is a set of window closing, or other unexpected actions. Is it possible to limit the sensitivity of the rounded bottom of the display strip in the "open position"? Edge Block using Tasker in this post is the best solution I have found. Works really well. An App called Edge Null also works, but not quite as well. Quote Link to post Share on other sites
Polaris 423 Posted March 11, 2020 Share Posted March 11, 2020 (edited) 3 hours ago, vnipicom said: Due to the frameless display when you press the top row sometimes (or rather, very often) I touch the rounded edge of the display. In some applications there is a set of window closing, or other unexpected actions. Is it possible to limit the sensitivity of the rounded bottom of the display strip in the "open position"? You might want to consider trying LineageOS, @tdm has implemented a slider to stop this very issue. There are also numerous other reasons to use Lineage, but I'll digress and just mention this one here. Edited March 11, 2020 by Polaris 3 Quote Link to post Share on other sites
vnipicom 1 Posted March 12, 2020 Share Posted March 12, 2020 On 3/11/2020 at 9:07 PM, Hook said: Edge Block using Tasker in this post is the best solution I have found. Works really well. An App called Edge Null also works, but not quite as well. Many thanks! I am now using patiaul screen. But he is not free. https://play.google.com/store/apps/details?id=ich.andre.partialscreen&hl=ru Quote Link to post Share on other sites
auvo.salmi 135 Posted April 2, 2020 Share Posted April 2, 2020 I don't know where I should post this, and I guess I am too lazy to search the forum for similar issues. But my main camera doesn't focus anymore. It tries though and rolls the focusing back and forth, but never gets anything in focus. Seems like auto exposure is also gone with the focus. I am running Lineage and the problem exists both on Lineage stock camera and Open Camera. Focus still works on front camera, so I believe this is more like a hardware issue. I have taken some otherwise great photos during this week, but they all look like this: 2 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.