Logan 22 Posted September 1, 2022 Share Posted September 1, 2022 Good luck. I understand! I am still on the fence myself. Quote Link to post Share on other sites
Mysti-Que2020 20 Posted September 1, 2022 Share Posted September 1, 2022 (edited) 13 hours ago, Logan said: Good luck. I understand! I am still on the fence myself. Honestly I love it but when verizon shuts down the CDMA network then I'm screwed. I bought my phone on fx website so I already know I'm not gonna get my money back but I need to be honest about the phones issues for the future buyer. Seems like reading on here majority is experiencing the same issues as me. Fx as a company I wish them luck if they ever make another phone. Edited September 1, 2022 by Mysti-Que2020 Quote Link to post Share on other sites
aMomarch 1 Posted September 1, 2022 Share Posted September 1, 2022 So, with Verizon carrier as your service, you’re not having as good a connection as you did with previous phone? I’m really wanting to get this phone but my recently bought replacement phone is not getting good connection. I never had that trouble with older Samsung but the times are changing. Ugh Quote Link to post Share on other sites
Mysti-Que2020 20 Posted September 1, 2022 Share Posted September 1, 2022 (edited) 11 minutes ago, aMomarch said: So, with Verizon carrier as your service, you’re not having as good a connection as you did with previous phone? I’m really wanting to get this phone but my recently bought replacement phone is not getting good connection. I never had that trouble with older Samsung but the times are changing. Ugh Yeah I'm old phone is a Samsung s10e and I'm getting 4g/LTE with no issues. With the FX I was only getting perfect signal only using CDMA/EVDO auto setting but once I switch it global or CDMA/LTE it would drop about every 15-20 minutes and reconnect in less than a minute. When I emailed FX about this issue they said they are aware and trying to do a firmware update or try this beta testing firmware which I'm not to comfortable doing. I was hoping they had an update when they might fix this issue but with FX they never have a straight answer. If verizon wasn't taking away there 3g towers then this phone will be perfect but end of December it be gone and then what, wait for fx to fix it with firmware. Edited September 1, 2022 by Mysti-Que2020 Quote Link to post Share on other sites
aMomarch 1 Posted September 1, 2022 Share Posted September 1, 2022 Thanks for replying. I don’t know as much as I need to about those things. Worried Verizon carrier will crap out on that phone, too.. durn. I need to contact my third party (charity) company to see what they might know. Quote Link to post Share on other sites
Mysti-Que2020 20 Posted September 1, 2022 Share Posted September 1, 2022 1 hour ago, aMomarch said: Thanks for replying. I don’t know as much as I need to about those things. Worried Verizon carrier will crap out on that phone, too.. durn. I need to contact my third party (charity) company to see what they might know. Hopefully they can let you know and get you more information about the network or any updates that's part of FX. I loved typing on it and doing my emails. It was a great phone on wifi and shoot the battery is awesome. At the end of the day it got down to 30% and that's with 10 hours of screen usage watching videos and browsing the web. I was really impressed with it. Quote Link to post Share on other sites
Logan 22 Posted September 2, 2022 Share Posted September 2, 2022 That sold fast. 1 Quote Link to post Share on other sites
Mysti-Que2020 20 Posted September 2, 2022 Share Posted September 2, 2022 14 minutes ago, Logan said: That sold fast. I was shocked also 😳. But I was watching a few that were selling used/new and sold anywhere from $805-$950, heesh. But hopefully the person who purchased it from me enjoys it and if they feel comfortable doing the beta testing for better service or wait for FX to finally give everyone the update they deserve. 1 Quote Link to post Share on other sites
Logan 22 Posted September 2, 2022 Share Posted September 2, 2022 After testing mine with the Verizon SIM card in it mine has sat in it's box...waiting for a 3d printed case from a buddy. But as time passes I am again tempted to to sell. If Verizon stopped working I would be completely out of luck. No other cell provider covers my house (we have AT&T, T-Mobile, and a Regional carrier also in my area)... 2 Quote Link to post Share on other sites
Arkx 8 Posted September 5, 2022 Share Posted September 5, 2022 (edited) Hi everyone My Fxtec pro1X 8/256 has arrived safe and sound, finally My old phone died so I had to buy a new one, not counting on when the pro1 should be delivered to me But ... the prolonged wait for it has exhausted all the appeal I turned it on and tested the keyboard a bit but I lost every love for it So I'd sell mine for €.650 + expedition costs Please, let me know If everyone here is interested Edited September 5, 2022 by EskeRahn (edited pro1 to pro1X to avoid confusion) 2 Quote Link to post Share on other sites
EskeRahn 5,471 Posted September 5, 2022 Share Posted September 5, 2022 Pro1X, not the old Pro1 I deduce from the memory numbers 🙂 Too bad it is not for you. Hope it will find a new owner soon. Quote Link to post Share on other sites
Arkx 8 Posted September 5, 2022 Share Posted September 5, 2022 Yes Pro1X Indiegogo early bird 8Gb/256Gb 1 Quote Link to post Share on other sites
brunoais 334 Posted September 6, 2022 Share Posted September 6, 2022 650€? (The dot confuses) shipped from EU? 1 Quote Link to post Share on other sites
EskeRahn 5,471 Posted September 6, 2022 Share Posted September 6, 2022 3 minutes ago, brunoais said: 650€? (The dot confuses) shipped from EU? With the dot it would be a hell of a bargain 🤣 2 Quote Link to post Share on other sites
Arkx 8 Posted September 6, 2022 Share Posted September 6, 2022 Shipped from Italy 1 Quote Link to post Share on other sites
Slion 1,201 Posted September 6, 2022 Share Posted September 6, 2022 Which keyboard layout? 1 Quote Link to post Share on other sites
Arkx 8 Posted September 6, 2022 Share Posted September 6, 2022 QWERTY 1 1 Quote Link to post Share on other sites
Arkx 8 Posted September 6, 2022 Share Posted September 6, 2022 My contribution page 2 1 Quote Link to post Share on other sites
Cintá 2 Posted September 7, 2022 Share Posted September 7, 2022 I'm interested in buying this. How can I get in touch with you to arrange shipping? 1 Quote Link to post Share on other sites
EskeRahn 5,471 Posted September 7, 2022 Share Posted September 7, 2022 1 hour ago, Cintá said: I'm interested in buying this. How can I get in touch with you to arrange shipping? Click on the user-icon and send a personal message 🙂 1 Quote Link to post Share on other sites
Cintá 2 Posted September 7, 2022 Share Posted September 7, 2022 32 minutes ago, EskeRahn said: Click on the user-icon and send a personal message 🙂 Thank you very much! 😊 1 Quote Link to post Share on other sites
Arkx 8 Posted September 8, 2022 Share Posted September 8, 2022 13 hours ago, Cintá said: I'm interested in buying this. How can I get in touch with you to arrange shipping? Hi Cintà, where are you from? I found no personal message from you Let me know Regards Quote Link to post Share on other sites
Arkx 8 Posted September 11, 2022 Share Posted September 11, 2022 For Cintà ed everyone interested 1 Quote Link to post Share on other sites
Adamyno 13 Posted September 11, 2022 Share Posted September 11, 2022 If someone is really interested, I might sell it too. EU. If it remains, I might use it. For now it's in its box and I'm waiting because I have too much content on my current device. 1 Quote Link to post Share on other sites
xhajt03 27 Posted September 16, 2022 Share Posted September 16, 2022 Alright, my findings: First of all, I decided to use the model from https://community.fxtec.com/profile/8210-ubuntuscofield/ (and only the bottom part, because I intend to use it in a leather book case) instead of the one referenced in this thread. The person printing it for me used the FLEX filament, that was OK (in fact, he printed another using PLA and yet another using PETg as well, but only the FLEX filament ended up in something usable). However, I had to adapt (enlarge) several of the holes a bit - in particular the two speaker holes (both had to be extended a bit towards the middle), the hole for the jack connector (headset) and especially the hole for the microphone (the one used for calling - not sure if there's another microphone next to the camera, or what else the small hole there is). But that was it, it seems to work as expected now. :-) 3 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.