All Activity

Too bad. Any special circumstances? Could it be water/moisture that got in and messed something? It sounds like a hardware failure of some kind to me. (Let us try to ping @CornholioGSM that got experience fixing PRO1/PRO1X)

I don't know if anyone still reads it - but I will share my experiences with dead Pro1 Yesterday it discharged and turned off - I connected it to a USB charger and got no reaction, black screen, no diode. I disassembled it and charged the battery to 3.85v on an external power supply, reconnected the battery and still the same, black screen, no reaction. The voltage on the VBAT pin is 3.85v, on the POWER ON pin is 1.8v both with USB charger connected and not connected. The voltage on 1.8v pin is 0 (0.7v with USB connected) When I press the power button the voltage on 1.8v pi

Lineage-23.2-20260727-NIGHTLY-pro1x with July 1st security patch installed smoothly via OTA. MindTheGapps16, and root was maintained. Changelog: https://download.lineageos.org/devices/pro1x/changes Another pretty small update, Wonder if they are working on Android 17 or if there's not much left to do because 16 is it. 😉

Lineage-23.2-20260720-NIGHTLY-pro1x with July 1st security patch installed smoothly via OTA. MindTheGapps16, and root was maintained. Changelog: https://download.lineageos.org/devices/pro1x/changes Not a big update, but I always test them.

Lineage-23.2-20260713-NIGHTLY-pro1x with July 1st security patch installed smoothly via OTA. MindTheGapps16, and root was maintained. Changelog: https://download.lineageos.org/devices/pro1x/changes

Lineage-23.2-20260706-NIGHTLY-pro1x with June 1st security patch installed smoothly via OTA. MindTheGapps16, and root was maintained. Changelog: https://download.lineageos.org/devices/pro1x/changes Apparently, the June 29th update last week included a major change to the updater. It's fine once you figure it out, but given that all you are doing is downloading and installing, the older, much simpler UI was easier. I hate changes in UI for no other reason than to make things look prettier. This is much better being treated as a terminal app. Sheesh. Lol. I'm just old an

Lineage-23.2-20260629-NIGHTLY-pro1x with June 1st security patch installed smoothly via OTA. MindTheGapps16, and root was maintained. Changelog: https://download.lineageos.org/devices/pro1x/changes

Lineage-23.2-20260622-NIGHTLY-pro1x with June 1st security patch installed smoothly via OTA. MindTheGapps16, and root was maintained. Changelog: https://download.lineageos.org/devices/pro1x/changes

Lineage-23.2-20260615-NIGHTLY-pro1x with June 1st security patch installed smoothly via OTA. MindTheGapps16, and root was maintained. Changelog: https://download.lineageos.org/devices/pro1x/changes

For the past few months, when I update LineageOS, I haven't been able to use Magisk to patch the boot partition directly in the inactive slot. I get an "unable to download bootctl" error, which is a network error according to GitHub, but I the error happens no matter what network I'm connected to. I have to export the update image, patch it, then flash the boot partition to boot_b manually using fastboot. Everything about LOS 23 works perfectly otherwise. Does anyone else have this problem?

Finally I can add something of value to this forum :-) This is Harry, he is a rescue and living with us since a good year now.

Lineage-23.2-20260608-NIGHTLY-pro1x with June 1st security patch installed smoothly via OTA. MindTheGapps16, and root was maintained. Changelog: https://download.lineageos.org/devices/pro1x/changes

Phew! That was close. Didn't get a chance to update until Tuesday night and discovered my Pro1x had been knocked loose from it's magnetic charging cable. It was rebooting and came up with 7% power. Was it in a boot loop because power was so low? Did I need my rubber bands. Apparently not. Don't entirely know why it was spontaneously rebooting, but it didn't start shutting down again. I connected the charging cable and turned off the screen and a couple of hours later it was full (Have it set to not charge over 85%. I think I was lucky. Lol. All's well that ends well. 😄 Lineage-23.2

Lineage-23.2-20260525-NIGHTLY-pro1x with May 1st security patch installed smoothly via OTA. MindTheGapps16, and root was maintained. Changelog: https://download.lineageos.org/devices/pro1x/changes

Helga is still here, but a whole lot more gray, just like me. 11 years old now...

Necromancing this thread with a dog I got yesterday...

Hi, Can't help with the parts you are looking for but i think I need one of the Cables for the pro1X. mine is only working when opened, screen freezes and has disorted display when i close it. have not checked if it's a connector issue but it really feels like it's the cable itself. please dm me! // edit: It is the cable. Molex connectors are fine and soldered. It's not the worn off insulation grounding the case, i isolated that, it's the cable itself. I am desperatly in need for a new one. Is anyone experienced in redesigning a cable to make a small order on PCB

Lineage-23.2-20260518-NIGHTLY-pro1x with May 1st security patch installed smoothly via OTA. MindTheGapps16, and root was maintained. Changelog: https://download.lineageos.org/devices/pro1x/changes

Lineage-23.2-20260511-NIGHTLY-pro1x with May 1st security patch installed smoothly via OTA. MindTheGapps16, and root was maintained. Changelog: https://download.lineageos.org/devices/pro1x/changes

No, I use only Magisk.

@TeZtdevice and please I want use apatch root... Did you try this root?

...you have PM from me 🙂 BTW i am searching for good condition back cover for pro1 and pro1x (blue).

Lineage-23.2-20260504-NIGHTLY-pro1x with April 1st security patch installed smoothly via OTA. MindTheGapps16, and root was maintained. Changelog: https://download.lineageos.org/devices/pro1x/changes

using los 22.1 with qx1000 and teams for work chat. it has never complained about root using magisk with play integrity fix inject, rezygisk, and tricky store+tricky store addon as the only modules. its not even on my denylist. all i did was install it from the google play store and it just worked. i did have to get rid of ms authenticator and switch to google authenticator. no idea if they ever resolved ms authenticator catching root but i figured using google authenticator was easier anyway.

yes thanks for your support..