Leaderboard

Thomas Bonde Pedersen has at IGG posted a fix for the not charging Pro1! ADD: This has been confirmed to work by other users! Please try it, before disassembly (or send in for service)

Soo yesterday i have madded my battery refurbishment . It was simple process - remove kapton tape, cut old battery cell contacts from pcb, littlebit shorten contacts on new cell, solder new cell to pcb with spot welder, isolate, bend pcb to correct place and then new kapton tape. It looks like original and whole process was for 5 mins 🙂 I am now inside testing - charged to full - lineage batt info shows approx 2900mA after full charge. I have now 66% on battery after 10 hours usage (lineage update, yt music for 2 hours in car, 40 mins on browser, some calls e

Today a Pro1-X arrived at my place. IGG-Contribution around #4000, July 2022. (Enthusiast Pro1-X bundle) Pro1-X 8GB + 256G, Keyboard Layout: QWERTZ , Pre-Installed OS: LineageOS. IIRC no engraving, black. A sapphire blue QWERTZ-device was shipped (the color looks great, btw). S/N < 7000. XDA-engraving on the back. Seals of the packing where already broken. The battery was approx 1/3 full at arrival. it was no problem to recharge it. The device was shipped with stock android. Screen protectors, spare batteries and screens where not included. Importtax to Germany was 28,50 EUR,

For anyone in Australia using 3G and worried about the impending shutdown of Telstra's 3G network, I finally figured out how to enable VoLTE. I am with Aldi Mobile (Telstra) and have been using the "GSM/WCDMA preferred" up until today (and have needed to use dodgy hacks as mentioned in this thread of enabled/disabling speaker phone when performing a call). So I've seen many places where you put this code in the dialer: *#*#4636#*#* But its VoLTe is always greyed out no matter what. I am not sure if Telstra have some whitelisting going on or what. Anyway, what finally ended up work

Soo yess...my phone have stuck on 10% (battery saver) for more than one hour with youtube playing. Final time on battery was approx 34 hours and 6 hours on display. After second charging my phone charges up to 3138mAh but after few seconds after disconnect chager it shows again 2900mAh. It looks like i can be happy with new cell. Question is for how long. BTW cell looks exactly same as original with contacts on exactly same place.

I send yesterday a request because my FXTEC 1 plus was not starting (empty battery). I received the cellphone one week ago. Today i received an email with the hint to recharge the phone with a rubber band (it worked!), and my question for the spare screen and the spare battery i ordered was also answered: After all devices are shipped. Just like a real company! Very sad the Phone is now already out of fashion. Hopefully there will be a new try to make a real state of the art slider again... call me insane, but i will order again!

Ok, so, good news! After some pondering, I decided to open the thing up. It was actually not that hard to take apart, the official Fxtec instructions for disassembling Pro1/Pro1 X (https://vimeo.com/483552998) were easy to follow. Note: I did not use a prying tool, as I found it easier to do with my fingers (as the plastic frame is fitted to the metal quite snuggly, I found it hard to get a prying tool in there). And a word of caution: the black paint on the back of the display chips really easily when removing the 5 screw covers. Once I had the display frame removed and the ribbon

We seem to have confirmation from someone else in Discord. The Pro1x is just kinky and needs to be tied up to get it's juices flowing.

You are lucky, mine doesn't boot, with a battery at 3,2 V, and a dumb red light who said to me : Not charging, you will have to completely dismont your brand new pro1x ...😑 Edit Ok works in LOS21 now, but what a sh... it's tricky to apply a bit more voltage directly on the battery connector, and also dismounting the whole thing.... What's a very big surprise, is to find a typical french AZERTY keyboard with é è ç , wich I had mailed fxtec for more as two years to switch in a standard qwerty but well... I'm going to try this beautiful-blue-things, at least the keyboard works good, and th

...I must admit I had given up all hope. and "3/4" sounds a lot better than what I had feared.

Another unofficial build of LineageOS 16.0 (for qx1000) is here, celebrating 3 years of support beyond its AOSP EOL. 🥳 At https://findus.zwergenschaenke.net/~puma/linux.html#lineagepro1 Go for the ROM dated 20250203. Changes since last release: Backported fixes up to the "1 January 2025" Android Security Bulletin. Updated system WebView and browser engine to Chromium 132.0.6834.122. Have fun.

Hi @drcp, @Hook has written down all the essential information already. I just want to add that, while the black spots in the corners are standard for these screens, they do not worsen over time. I own three Pro1 and one Pro1-X: All have the black corners to some degree, but even for the oldest device they have been stable over time. Concerning QWERTZ vs. QWERTY: F(x)tec lost many QWERTY devices to unauthorized grey marketing by their Chinese logistics partner company, which is likely the reason they ran out while shipping to backers. If you are really unhappy with the keyboard

I'm not sure how to approach the word "Fair" in all of this, Neither what backers have had to go through, nor all of what FxTec was hit with producing these phones, resulting in what the backers had to go through, are fair. I'm not arguing you are not entitled to feel as you do, or dismissing your concerns, but there is a lot of backstory to this, contained in the IGG updates and in the production thread on this forum. First, note, when you back a project on IGG you are not even guaranteed a product. You are investing in hope of a return, not buying. Despite being hit by disaster after

Think it’s time for me to join the action. I’ve got a Pro1x in daily use since July, stock Android 11. I’m located in Denmark, ’Telia/Telenor’ network if anyone wonders. In the time I’ve had it, I’ve been on vacation driving through both Germany, Austria and eventually Italy. I haven’t had a single connection issue anytime, other than sending MMS from Italy didn’t seem to work. Positives: No network issues No hardware issues No issues calling/receiving calls. Texts also fine. Build quality is decent. Only the buttons on the side are a bit flimpsy. Batter

To be honest with you, I didn't believe this hold-power-button-5-hours hack will work, but it did! Thanks a lot everyone! 🙂 After 14 long years I've finally changed my Nokia E73 to something new. 🙂

Hi all, I am late to the party. I didn’t expect to receive this device and it showed up at my door late last week. I am really struggling to install Sailfish on the qx1050. I followed the instructions in the first post of this thread and I can’t get past the “Powered by Android” boot screen. I tried both the March 2023 (Sailfish 4.5) and October 2022 (Sailfish 4.4) releases. I booted to the bootloader, ran the flash.sh script. Each time it states the script has completed successfully but no joy. Can anyone advise me as to what to do? UPDATE: I figured out what I did wrong. When I fi

They seems to finally be sending out the form-request for IGG. Got this

by FX Technology Apr 23, 2024 • 1:48PM 25 minutes ago Resuming Shipments & Perk Confirmation Dear Backers, First and foremost, we extend our apologies for the delay in updating you. We have been diligently working behind the scenes to move our Pro1 X stock from our previous logistics provider to a new one, ensuring reliable storage and fulfillment of our devices, which we are pleased to announce is now secured. This previous logistics provider took some of our stock without agreement, sold it onwards to th

This is my final phone. As mentioned, I've used a fishing line to hold the top part in place. This makes the entire phone much stiffer. https://www.youtube.com/watch?v=pUZs2xNawWE Keymapping: Play/Pause = fixed landscape mode Play Next = enable auto rotate Play Previous = toggle flashlight Win (Meta) = ctrl right # = Shift right since I used # key for right shift, we have to find a substitute: Ctrl left + Ö = type text: # Ctrl left + Ä = type text: ' So far, I'm very happy with it and I fully switched from my Pro1 to the self-assembled phone. Slowly

Official Release: https://download.lineageos.org/devices/pro1x/builds Changelog: https://download.lineageos.org/devices/pro1x/changes First Build: LINEAGE-22.1-20250101-NIGHTLY-PRO1X-SIGNED.ZIP How-To upgrade v.21 to v.22.1: https://wiki.lineageos.org/devices/pro1x/upgrade/ Gapps (ARM64!) https://wiki.lineageos.org/gapps/

Hello, it looks like LineageOs 22.0 from #npjohnson is out 🙂 As always (i mean) updates will be every month. https://updater.oddsolutions.us/devices/pro1/builds So official will be within two months. Maybe will be good to test it and post bugs to npjohnson before official los release because npjohnson is official los developer 🙂 * i will test it within few days

Slightly off-topic: My browser has been flagging this site as insecure for weeks. Could someone please just run 'certbot -renew' once? 🙄

Hello, same as for Pro1 is LineageOs 22.0 from #npjohnson out for Pro1-X🙂 🙂 As always (i mean) updates will be every month. https://updater.oddsolutions.us/devices/pro1x/builds So official will be within two months. Maybe will be good to test it and post bugs to npjohnson before official los release because npjohnson is official los developer 🙂

Thank you Hook for bringing this to my attention. I have now updated all the links in Documentation tab. Everyone should be able to access now.

Another DOA phone that wouldn't charge here. I was relieved to find this forum and that I was not the first to have experienced the problem. And I am happy to confirm that the rubber band hack worked for me also... Phone was still unresponsive after six hours, but the following day (after a total of 18 hours) it sprang to life. DigbyT

Updated via OTA to 21-20240928-NIGHTLY-pro1 without problem. Camera and flashlight function is back 🙂

I once tried to swap-in the screen assembly of a Pro1-X into a Pro1. They fit mechanically and connector-wise. The result was that the Pro1 was able to boot into a (working) Lineage recovery, but not into the full OS. I thus assumed the selfie camera was different. Of course, the top half of the Pro1(X) includes more than the (touch)screen and camera. There is the indicator LED, the ambient-light photodiode, a speaker and (I guess) a mic for handheld audio. But somehow I had assumed those were analogue devices that could not cause a crash upon boot.

Today I got an email notification from my US based mail forwarder. "You have a new package". I was baffled as I didn't remember having ordered anything recently... To my surprise, when I checked the package photos, there it was. "Sender: FX Technology"... So here I am, another customer who finally has had their phone shipped. Contribution #21XX

More stuffs are working now. I have submitted patches to Linux Kernel Mailing List which may get picked up soon by the maintainers. Thanks @zstas for their work on postmarketOS 🙂

Rubber band worked for me! I had a power meter attached. During the process, there was a 150mA pulse approximately once every 10 seconds while the power button was depressed. After about 5 hours, the LED turned into a fast blinking red light, and charging rate increased to 500mA. When I saw this, I removed the rubber band. A short time later, the screen turned on, Android booted and charging rate went up to 2000mA.

Sure do hope it works... Edit: it works - i just used a couple of rubber bands and paper towel to protect the screen.

This actually works. Thanks for this hint. Took me some hours to realize the screen was already turning on and off again. 😅 Well, now I'm stuck with starting it (link). Anyway, helped a lot to fight first resignation after opening a package I waited for more than 2 years, facing it seems broken.

I just came here to share my report of replacing a screen assembly. After replacing, I now have a working screen. Two corners of the screen exhibit the black corner problem that is common with these replacement screens. These black corners are not intrusive and don't hinder normal use. Since most of the Aliexpress links in all the threads have rotted, here's a new one: For F(x)tec Pro1 QX1000 LCD Display Touch Screen Sensor Digiziter Assembly Replace F(x)tec Pro 1 LCD Touch. I bought that whole assembly part instead of just a screen + digitizer, as my plastic screen frame had cracked a bi

Pro1 uses a display originally manufactured for Elephone U Pro. Here is an original display (my handwriting of the amount of black spot problem was blured) made for Elephone U Pro: Here are the displays arrived today: No, the original display I had in my hands was the original display of my Pro1 (early version). It looked like the top/bottom displays in the photo above. However, looking deeper of the most right one which is installed in frame, I suspect its sticky part was not covered with black tape (like the display in the middle). I think it may be a repl

I have no clue where the original thread ended up. I posted a couple of cases I got a while back that are perfect, but y'all didn't want the funky designs and colors. I finally found a black one on Amazon https://www.amazon.com/gp/product/B085B37D84 All you have to do is GENTLY remove the rubber phone holder, use a few pieces of double sided carpet tape (lemme know if you want a link) and mount the phone. Camera hole is perfect, no button interference, and great protection.

I received the USB adapter so my QWERTY phone is pretty much ready. It was quite a tight fit to add the adapter so I had to shave it little bit. You can find picture attached. Regarding software, I made an automation with MacroDroid that changes the virtual keyboard based on orientation. For landscape I am using NoKeyboard app so there is no virtual keyboard at all and Gboard for portrait. It is working very well. You just need to perform easy ADB hack to allow WRITE_SECURE_SETTINGS. And the funniest thing is that I ended up using FinQwerty app for the keyboard layout. After te

I'm not disagreeing with your main point. You are right. But for someone who doesn't like using their phone in portrait and abhors touch-screen keyboards, there are work-arounds that, if you don't mind a little more scrolling (I don't-- that's one of the trade-offs I'm willing to make) make it not so bad. Here is what Newpipe (I had to download it) looks like with my display settings on my Pro1x: And it gets better if I actually just search... And while I don't want to show you my calendar, I can't tell you how wonderful it is to see an entire month on screen and

https://liliputing.com/sugar-cubes-n97-elite-reimagines-the-nokia-n97-smartphone-as-a-handheld-game-console/

I've just uploaded build '20250309' of LineageOS 16.0 for OG Pro1 (qx1000) to https://findus.zwergenschaenke.net/~puma/linux.html#lineagepro1 Changes since last release: Backported fixes up to the "February 2025" Android Security Bulletin. Updated system WebView and browser to Chromium 133.0.6943.137. Have fun.

They report that they have fixed it 🙂 Thanks @Casey 👍

HMD Global (used to be known of Nokia Android phones) is now trying similar thing what Motorola did with Moto Mods. https://www.hmd.com/en_int/hmd-fusion https://nokiamob.net/2024/09/05/ifa-2024-introducing-the-modular-hmd-fusion/ Maybe we see keyboard mod as well?

No no no claude0001, I'm not gonna read this! :)) BTW the psychologist appointment has been canceled - fxtec promised me to send new screen!

You can use app called Round corners and Hide notch to make the curve of the corner bigger (there are other apps too). It is not a perfect fix since it does not work in the settings or the drop down menu. However, it can help little bit. Maybe with root you are able to make better fix? https://play.google.com/store/apps/details?id=round.screen.corner.hide.notch

14 years--that has to be a record! Though I did use 2 paper cups and a string as a phone during my first 8 years on the planet. Never ran out of battery, either 🙂

Finally, upgrade to LOS21 rooted with MindGapps. Very easy to do. All is working fine ! The azerty layout provided directly on LOS21 is perfect ! No missed char ! Even AltGr access char available by the right yellow arrow key ! 😎👌 Next step ... Dual boot to try a Linux distro.

Same explanation as here:

Have the same issue. Hoping it will work. It's really frustrating waiti g for so long and then finally you receive the phone and it's not charging/turning on Update: After leaving the phone in the battery loop over night it turned on this morning. THX for this post

I've uploaded my latest build of LineageOS 16.0 for Pro1 (SD835) at: http://findus.zwergenschaenke.net/~puma/linux.html#lineagepro1 Go for the ROM dated "20240620". Changes since last month: Include backported Android security patches up to the June 2024 ASB. Update bundled version of WebView to Chromium 125.0.6422.165. As usual, the full patchlog with respect to the unmodified, official LOS 16.0 tree is available at the link above. Have fun.

https://www.fxtec.com/smartphones/pro1x https://www.fxtec.com/smartphones/pro1