VaZso

For me, it is absolutely good as it has needed keys for international language and also for terminal use. So those extra keys are very useful for me - in extra you mean basically everything else except alphabetical and numerical keys I think.

Anyway, also the amount of workers in the factory may be a real problem in China (as travel restrictions are still apply as far as I read).

That was the reason for me to buy the QWERTZ version (however, it was only available in Europe). However, I see similar signal strength like my Moto G6 had - but it may highly depend on the actually used frequency band. One of the networks I use is relatively weak at home. When I set it up, I was connected to a relatively far WiFi AP (the one what I use for quick setup / testing). It worked, but there was a position where it frequently reconnected. Moto G6 also does not have high signal but have not experienced reconnecting in such situations. However, I have not noticed simila

I had an IGG coupon and a pre-order here. When I was waiting for my pre-order to be shipped, I saw a Pro1 to be sold at DragonBox website, so after thinking on it a while, I have bought another Pro1 which is the phone I currently using. I knew my January and February will be very busy which was also part of my decision - It has arrived in the very last days of 2019 and only one working day separated me to receive it before Christmas (although FedEx showed it will arrive on 23th even after Christmas). Later (in the end of January), my pre-order has been also arrived but it has a crack on

No. He doesn't really like to completely restart setting up the phone (and also that is why I miss a functioning backup / restore solution). Currently Android does not support it (even though it tries to reinstall apps and restore some settings but it is absolutely not a fully working solution). I was thinking of trying it on my 2nd Pro1 but I currently don't know what to do with that phone because I am not convenienced with it and I had a really few spare time in the last weeks... it is sitting in its box since I received it and F(x)tec told me they will send a new display then to send

On his phone the LED works when it is charging (red) or has charged (green) state but nothing else. Even with notification app installed or uninstalled.

As far as I know, no - it did not work. I am absolutely sure we also tested this colour but I was not 100% sure about missed calls.. but I have called him to test and it did not work. However, he removed the application as it did not work at all. I wanted to say him to test it again as I saw this application had an update maybe a day ago. It may be related to your problem anyway or another possibility is that I have installed it prior last OTA but I doubt if it was installed after last OTA may cause problems...

It remembers me the Windows method where initially they didn't even use permissions, then (by NT) they built up a proper permission system but practically nobody used it in a proper way so they started to restrict root (Administrator) permission and started using popups. Linux also has a proper permission system but it seems Android goes the wrong way by restricting user (giving no root) but the hacked root has no proper permissions. ...this is the worst possible scenario in the means of security I think...

...but if I understand well, I would not have an option to enter a password for root every time. I mean root should not be used automatically in any case... if necessary, some permissions may be granted, but not a general access. If (and when) root access is really needed, one should authorize. ...and not allowing root access (in general) like Android's official behaviour is the opposite side of the horse which is also a really bad restriction. Ps: (falling to the) opposite side of the horse is a Hungarian phrase which I don't know if it is a local phrase or something came fro

Is it serious? Why? That case I understand why people don't like rooting methods... Is there a correct method which gives root access but not for every apps and not for everybody who has access the phone? I really hate Android handles all of its users as an idiot not giving access to their phone for them but I don't like to be treated as an idiot - and that is why I hate Android.

Yes, but manufacturer may just released an update about unknown production time (at least for us)... So, currently it is not simple at all to say any meaningful information... so yes, an update about no update is possible but nothing more unfortunately.

I think they don't know it - also their manufacturer doesn't really know that I think. Even our PCB production partner can not predict when they are able to assembly our panels - not related to F(x)tec.

I don't know, I have just installed and it works well for me... ...but it does not work on my friend's phone. Basically one can assign a colour to a notification of an application. You can even test it and it should display appropriate colour then... Anyway, it seems for me those values are digital 1 or 0 so I have not really noticed any change in brightness - I wanted to lower the brightness of notifications without any success. Also, RGB LED is a bit uneven, if I was F(x)tec, I would put some light diffuser on top of them...

It had the same accesses enabled and application's version was also the same. The only thing I didn't dare to do is to remove Light Manager from my own phone then reinstall it again to see if it still works...

I don't know but I haven't seen any related apps installed anyway. That AMOLED app was suspicious because it provides an on-screen display (which would be good to be enabled by default anyway), but that was also uninstalled which had no effect...

Today I have also experienced the Fingerprint sensor is not available error message on lock screen - I had to restart the device to work again. Then I had to set fingerprints again - as usual... ...however, a few days ago, I have restarted the phone several times - first to see if system starts when I connect a charger cable, then I went to fastboot mode and enabled offline charging (sorry for not appropriate wording) then restarted again. I have wondered because this was the first time it did not loose my fingerprints... otherwise I always had to set them again and the same situation

That is also what I thought but I could not find any applications that I thought it may affect it... Also we are on the latest OTA...

We did it in exactly the same application but not on a system status but an application - so selected a colour, clicked on test, then on OK, turned the screen off and... It works perfectly with my phone but not with his phone - side by side each other... Does "System status" change anything related to its test function? I thought "AMOLED" as a suspicious application, but disabling did not help, removing it did not help and I could install it while notification app still working (when display is not active, but it can be configured). So this app did not work with his phone e

Unfortunately, he don't have root access and also I have not gained root as it may cause problems with OTA - this is one reason why I don't like Android. Also, he has closed bootloader while I have opened it in case a reliable backup solution will come up. (I would like to have a real backup / restore solution later.) Basically LED is working for him, at least red and green can be controller by system but not by a user application which is strange as it works for me using the same software version...

My friend having trouble using notification light on his Pro1. I have told him to install a program like "Light Manager 2" but it does not work for him. When charging, red light works. When charged, green light also works... ...but none of the settings of Light Manager 2 works - even "testing" of specific light has no effect. I have told him to try Textra which also has notification setting, but it also did not work. As far as I know, he tried another notification app without any effect. We have cleared cache, removed application, restarted phone, reinstalled applicatio

I have these adapters tested:

Now I have installed it but I have not found this option in it either. Yes, it should work but without root rights it is not an option - that is one thing why I don't like Android...

My phone is not rooted and camera app works well.

I agree it produces really good photos in dark environment. Just experiencing it the second day and it seems to be really good. My main problem with it that it does not have an option of saving to SD Card. There is a Gcam Tool which can copy/move (when payed) them to SD Card but it is a later operation so it still uses internal flash which I wanted to avoid. In night mode the image is strange but taken photos are good. It also has a really working HDR function which can capture good photos.

It may be related to high CPU load...