Rob. S.

Wow, seems I haven't been up to date with regard to Magisk... Looks like not only MagiskHide, but also everything related to SafetyNet is removed from current Magisk releases. (See John Wu's statement in https://topjohnwu.medium.com/state-of-magisk-2021-fe29fdaee458) now that he's working for Google, and also this XDA Developers thread: https://forum.xda-developers.com/t/discussion-magisk-the-age-of-zygisk.4393877/.) That said, MagiskHide seems to be in the state of being replaced by the Zygisk (Magisk running in the new Zygote mode) "deny list"... And the tools to ensure Safety

You also might want to remember that there still is a probably small, but unknown amount of unfulfilled Pro1 orders which were converted to Pro1X orders that I very much hope will be served first! 😉

Unfortunately, the battery doesn't seem to add anything new to help us source it as a spare part from somewhere outside Fxtec...

For what it's worth, for me, it doesn't.

I have the same problem but it has reached the state it mostly don't work and it is a pain to put it on a charger and it results in stopping after about 20-30%... I mean mechanically. I'm still not sure how much of my charging problem is mechanical and how much software. While applying some pressure in this or that direction mostly does either change between charging/discharging states or reduces/increases the charging current (I closely watch the AccuBattery app's current display when I do that), I frequently encounter a state in which such pressure won't make it charge again. Then,

Hooray! 🙂

That's where my self-replaced screen has developed a gap between the casing, too, after it had been the same with an earlier replacement that had been done by a repair shop. Looking at the phone closely, I now found that the casing bends backwards there. I suppose the usual glue (I've used T-7000) just isn't strong enough to resist the separating force applied by the bent casing. That said, I've never had any problems yet with touch-insensitive parts of the screen or something similar.

No, don't say that, please. I was still under the impression that the "before Christmas" that was communicated for my Pro1 in 2019 will at least hold true for 2022!!

Yes, there are. Then again, history is just repeating itself here. Fxtec's information habits were similar between announcement, development, and the several production and shipment phases of the original Pro1. While that doesn't help anyone and doesn't make anything better, it means any implications like they "ran out of funds" or "lost interest" are not warranted. Yes, it's the abominable way they've been doing communications right from the start – nothing less, but nothing more, either.

@EskeRahn I tried pressurized air, but to no avail... Both the USB socket and the magnet adapter seem clean... @VaZso Sounds very similar to how my issue developed over the last few months. Mine is still in the state that charging is mostly reliable (although sometimes varying in current...) once it has started, as long as I don't touch the phone... I wonder whether the Pro1X might still have the same connector board, which would increase the dim chance to ever get such a thing from Fxtec as a spare part... My soldering skills wouldn't be up to the task of replacing the connector on

By the way, regarding my several charging problems, new observations substantiate a suspicion that those cases in which my phone simply drops to 'discharging' and stays there are now caused by the USB socket slowly becoming unreliable, even though I've been using magnetic adapters all the time...

Now this is really sounding like progress for once!

[deleted]

Just for the record, with last Monday's update I again had several occasions of the phone not charging, but the state being "discharging" with a negative charging current and no flash symbol in the status bar, contrary to the usual "not charging" state with a small, two-digit positive current and the flash symbol showing. Downloading the new update now...

I can finally clear this up! It was indeed the latter. After yesterday's LOS update the animation was up for three hours or so until I stopped it by switching the phone off with a power long-press, after which it booted up normally—but without any trace of my 512 GB Kingston "Canvas Go! Plus" micro sd card. Seems a file system check was taking it so long. (On my laptop, I could read the card ok, but a file system check aborted with read errors.) Definitely one of the more expensive cards I bought, and it seems it doesn't do much (if any) wear levelling. Never happened to me before except with

Which I fear isn't likely to happen for the Pro1... The issue was one of the first reported bugs, and it isn't limited to T-Mobile networks, either, it's a general VoLTE thing. (I'm on Vodafone here in Germany, with the advantage that while some carriers in surrounding countries have already begun to switch off their GSM networks, there are no such plans here yet...)

Bummer; yes, I'm afraid it looks like it...

My solution to this was to disable "4G Calling" in Settings, Network and Internet, Mobile Network.

How do you make a smartphone battery? To the best of my knowledge it's nothing that could be done outside those big factories. And our problem here is that until now we could not identify make or maker of the one used in the Pro1...

I know of no other source than Aliexpress... That said, I haven't heard of any of those screen orders having gone wrong. I bought two screens myself from https://aliexpress.com/item/32956500815.html and they arrived as expected.

A while ago I've bought two of these: https://de.aliexpress.com/item/32956500815.html I've already had success installing one of them. The adhesive strips which are included don't suffice, though; I've used B-7000 glue (and still the lower right corner doesn't stick perfectly; next time I'll take more care especially with the corners.).

And this does not change after a regular reboot? If it would, it could be related to this (unsolved as of yet) issue:

September 2019, here (I probably was one of the very few original orderers who couldn't be served anymore off the last batch of the Pro¹) – plus an IGG order from October 2020. Just to put things in perspective 😉 Having found a pre-owned device in the meantime, I can of course be a bit more relaxed than others as to when those devices will finally be delivered. Reading F(x)tec's latest progress update, I would guess it will not be before March, more probably April.

As far as I remember, they don't let IGG backers cancel their orders (which I fear is also according to IGG's rules); they say you can sell the item when you get it...

I also got the same information as a non-IGG customer (strictly speaking, I'm a non-IGG customer and an IGG customer) on Feb 3rd.