ahunter 108 Posted April 8, 2020 Share Posted April 8, 2020 This One Works Perfect: https://www.ebay.com.au/itm/153298929217 Wallet closes perfectly (No Mods required). A little thinker than some other cases. Phone is removable while still protected in removable case. Cutting required to access charge port, finger scanner, top speaker and headphone jack. No cutting required for power and volume. The raised buttons on case are slightly mis-aligned but work perfectly. 2 Quote Link to post Share on other sites
Slion 1,200 Posted April 8, 2020 Share Posted April 8, 2020 1 hour ago, ahunter said: This One Works Perfect: https://www.ebay.com.au/itm/153298929217 That looks awesome. I like that detachable feature too. What about rear camera and mic access? Moreover since this is detachable I wonder if you could use the P20 Pro variant of the inner case together with the P30 Pro variant of the outer case to get larger camera cutout. 1 Quote Link to post Share on other sites
ahunter 108 Posted April 8, 2020 Share Posted April 8, 2020 1 hour ago, Slion said: That looks awesome. I like that detachable feature too. What about rear camera and mic access? Moreover since this is detachable I wonder if you could use the P20 Pro variant of the inner case together with the P30 Pro variant of the outer case to get larger camera cutout. Camera lines up perfect. Does need small hole for the rear mic. But you can take the phone out of the flipcase with the magnetised back. 1 Quote Link to post Share on other sites
Slion 1,200 Posted April 8, 2020 Share Posted April 8, 2020 (edited) 12 minutes ago, ahunter said: Camera lines up perfect. Does need small hole for the rear mic. But you can take the phone out of the flipcase with the magnetised back. How is the quality of the leather? Could you provide pictures? How long did it take to deliver? What's the brand? Could it be sourced from somewhere else? Edited April 8, 2020 by Slion Quote Link to post Share on other sites
Slion 1,200 Posted April 8, 2020 Share Posted April 8, 2020 (edited) Those are looking good too: https://www.etsy.com/listing/670775213/huawei-p20-pro-detachable-wallet-case https://bouletta.com/products/magnetic-detachable-leather-wallet-case-for-huawei-p20-pro?variant=28893637017652 However it's a bad time to order anything these days. https://www.burkley.de/Handyhuelle-WALLET-ID-fuer-Huawei-P20-Pro-Lederhuelle-mit-Kartenfaecher-Antik-Braun Edited April 8, 2020 by Slion Quote Link to post Share on other sites
ahunter 108 Posted April 8, 2020 Share Posted April 8, 2020 2 hours ago, Slion said: How is the quality of the leather? Could you provide pictures? How long did it take to deliver? What's the brand? Could it be sourced from somewhere else? Sorry it is in Tasmania where Ilive and I am locked down at work in Western Australia, It is reasonable quality, probably not real leather but pretty good for the price. 1 Quote Link to post Share on other sites
Craig 1,435 Posted April 8, 2020 Share Posted April 8, 2020 (edited) 14 hours ago, ahunter said: A little thinker than some other cases. Depending which letter I change, that can mean thinner or thicker. It's like trying to perfect the ideal combination of T and F on a true/false test when you're not sure. Edited April 8, 2020 by Craig 2 Quote Link to post Share on other sites
lameboyadvance 98 Posted April 8, 2020 Share Posted April 8, 2020 19 hours ago, ahunter said: This One Works Perfect: https://www.ebay.com.au/itm/153298929217 ...Which variant did you purchase? They have a list for a whole bunch of them. Was it the P20 Pro like everyone else has been buying? ...And the auction has ended anyway... Quote Link to post Share on other sites
ahunter 108 Posted April 8, 2020 Share Posted April 8, 2020 yes P20 Pro is what I ordered 1 hour ago, lameboyadvance said: ...Which variant did you purchase? They have a list for a whole bunch of them. Was it the P20 Pro like everyone else has been buying? ...And the auction has ended anyway... Quote Link to post Share on other sites
ahunter 108 Posted April 8, 2020 Share Posted April 8, 2020 6 hours ago, Craig said: Depending which letter I change, that can mean thinner or thicker. It's like trying to perfect the ideal combination of T and F on a true/false test when you're not sure. lmao Thicker. Could be made thinner by cutting card holder out but folds around phone without modification. Quote Link to post Share on other sites
EskeRahn 5,421 Posted April 9, 2020 Share Posted April 9, 2020 I got another variant from here: https://www.ebay.co.uk/itm/163816498496?var=463367316516 that is not quite as good as these https://www.ebay.co.uk/itm/254181243108?var=553543447253 mentioned above The first is a bit thin/flapsy (and have a minor fabrication flaw on both I bought), the second is stiffer, and with partly matted edges. 1 Quote Link to post Share on other sites
DieBruine 397 Posted April 10, 2020 Share Posted April 10, 2020 Does this bumper include holes to attach a cord? Quote Link to post Share on other sites
EskeRahn 5,421 Posted April 10, 2020 Share Posted April 10, 2020 https://eskerahn.dk/?p=3620 59 minutes ago, DieBruine said: Does this bumper include holes to attach a cord? The P20 Pro cases (practically) all need simple modifications, that anyone can do with a pair of scissors, see earlier in thread or https://eskerahn.dk/?p=3620 1 Quote Link to post Share on other sites
DieBruine 397 Posted April 11, 2020 Share Posted April 11, 2020 Yeah, I understand I could puncture two holes. But it looks to me that pre-fabricated ones are a bit tougher and less prone to tear. I'm actually happy with the one I have now. But it is very bulky and thick. I would like a thin/slim case, because, well, the phone is a ridiculously slippery. That's one of two reasons I prefer a bumper case. My current case comes with pre-fabricated holes in the left lower corner. I always use an carrying cord. It helps me not damage the phone and provides a great tool to get the phone out of pockets easy. I think I will order a few of these cases. Still waiting for the other Pro1's... Has anyone ordered the Hiveskin flipcase? I'm curious about the fit. Pretty sure my daughter would like that one. Quote Link to post Share on other sites
EskeRahn 5,421 Posted April 11, 2020 Share Posted April 11, 2020 1 hour ago, DieBruine said: Has anyone ordered the Hiveskin flipcase? I'm curious about the fit. Pretty sure my daughter would like that one. Yes, there are photos earlier in the thread, just search the brandname 🙂 And opviously you are right, prefabricated holes are better, but i have not have any of the many different types of cases i attempted to modify tearing, so I guess the risk is more in theory than a practical problem, none of the cases have been extremely thin though. Quote Link to post Share on other sites
illie-vanilli 58 Posted April 13, 2020 Share Posted April 13, 2020 (edited) On 4/8/2020 at 5:21 AM, ahunter said: This One Works Perfect: https://www.ebay.com.au/itm/153298929217 Wallet closes perfectly (No Mods required). A little thinker than some other cases. Phone is removable while still protected in removable case. Cutting required to access charge port, finger scanner, top speaker and headphone jack. No cutting required for power and volume. The raised buttons on case are slightly mis-aligned but work perfectly. The ebay version is no longer available, but I noticed this is also available on the wish app (and perhaps therfore also on Ali Express, but can't check that yet). Pictures are very similar to these and colorscheme is the same. Going to order one to see how the quality turns out, but if someone else want to check it out, it's described on Wish as follows (see attached picture) (just noticed part of the description is missing, but it's also available for the huawei p20 pro) Edited April 13, 2020 by illie-vanilli Incomplete screenshot 2 Quote Link to post Share on other sites
illie-vanilli 58 Posted April 13, 2020 Share Posted April 13, 2020 Here it is on Ali Express:https://www.aliexpress.com/item/32957954956.html?spm=a2g0o.productlist.0.0.2a1f11f03lqaxl&algo_pvid=3e242e70-dec9-4389-aa33-3cb60a4bb0a6&algo_expid=3e242e70-dec9-4389-aa33-3cb60a4bb0a6-26&btsid=0ab6fb8315867917149457448e4611&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ 1 Quote Link to post Share on other sites
lameboyadvance 98 Posted April 14, 2020 Share Posted April 14, 2020 ...I'm somewhat wary of 'magnetic' cases. How strong is the magnet? most of them seem to be very weak and the phone will go sliding with any amount of force. Quote Link to post Share on other sites
sequestris 710 Posted April 16, 2020 Share Posted April 16, 2020 2 1 Quote Link to post Share on other sites
sequestris 710 Posted April 16, 2020 Share Posted April 16, 2020 3 Quote Link to post Share on other sites
sequestris 710 Posted April 16, 2020 Share Posted April 16, 2020 Still loving this thing. I don't think I shared the images of it in actual use. Best thing ever. Having the slide-up for the camera is great and it doesn't interfere with the image quality or flash at all. Perfect for videos too. And damn that thing is sticky. 2 Quote Link to post Share on other sites
Slion 1,200 Posted May 11, 2020 Share Posted May 11, 2020 (edited) My latest creation: Based on Snakehive for P30 Pro from which I removed the layer with card slots to replace it with a thin layer of leather from a Wiiuka case for P30 Pro too. Hand stitched them together. Replaced the cheap Snakehive TPU case with this one. It's a case made of 4 different cases, I call it the Frankenstein case. Edited May 11, 2020 by Slion 1 Quote Link to post Share on other sites
Slion 1,200 Posted May 11, 2020 Share Posted May 11, 2020 Front side: 1 Quote Link to post Share on other sites
lameboyadvance 98 Posted May 15, 2020 Share Posted May 15, 2020 (edited) On 4/14/2020 at 1:33 AM, illie-vanilli said: Here it is on Ali Express:https://www.aliexpress.com/item/32957954956.html Well I finally received one of these cases. The phone cover magnet does seem stronger than I was expecting, however I still doubt it will survive a decent drop. That combined with the barely holding magnetic latch means I expect the case will just fly apart as soon as it hits the ground. The latch may hold better if I remove the card holder from this case like I did my previous one, but at this point I'm holding out for a 3D printed bumper case anyway. Edited May 15, 2020 by lameboyadvance 3 Quote Link to post Share on other sites
EskeRahn 5,421 Posted May 15, 2020 Share Posted May 15, 2020 2 hours ago, lameboyadvance said: Well I finally received one of these cases.,,,,,, How thick is the whole thing closed? The simple flip cases (with removed credit card holder) I'm currently using is 21mm thick (157mm long and 81 mm wide at the clasp, 79mm elsewhere) Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.