EskeRahn

Oddly I can not recommend the FIRST post, but I can recommend a specific reply, like I just did here for the test. So when we want to make a thread that can be handled this way (one of) the first replies can be used to point to the original post.... If it is say the second comment and just refers people to read the initial post just above, we would have same functionality.

NO it was not, you remember wrong, sorry... That is a MUCH OLDER screen dump, as can clearly be seen by the "Shipping globally is estimated to be July 2019" that was changed around mid June. I do not remember the exact day, but on June 17 it had been changed to "Summer 2019", see e.g. this. So you dump is older than that... We got a newsletter on July 2 saying "We anticipate that payment will be requested at the end of July, ahead of an expected shipment date in early September." Unfotunately the WayBackMachine has no points between April and August of this page. But your dump matche

That would be the "Hal_a" sensor. See also this

Amazing stretch, 10mm. Have you got a link for it, or did you buy it in a store?

But that is only 14.4 cm long, is the bottom so elastic that it could stretch almost a whole cm extra? Or did you heat it?

@Jfrelish, Nice. What device was this case originally designed for? It looks like it is a better fit than the P20 Pro, is it a thinner device?

So in mid June they say they will extend it for a week, and you buy mid July... The order page was changed at the latest June 19. as a comment that day quoted what it said. But sure it was not clear at what exact day the extended offer ended.

Interesting. If you want to take this to the ultimate, you could even consider the ORDER they are pressed. That is there is nothing that says E.g. Alt+Sh should do the same as Sh+Alt This would give us a shitload of keymaps.... An my suggestion (if it is doable) would be that releasing a modifier-key-combo without pressing a key after would display an overlaid keymap for what each non-modifier would give. And if sticky, the same after the last modifier is held down for a while without release.... Just Ideas 🙂

Some are reporting aptX working, even in HD variant. see this. But several reports issues, so it works to some extent, but not perfect.

The Pro1 got two Hall-probes, one for detecting Slider open&close and one that seems designed for detecting a Flip-case! See this. Now THAT was a nice surprise! It does not seem to be part of the BOE screen assembly looking at their imges, so a nice Easter egg from F(x)tec! It does not currently seem to have any action (yet), But I hope an OTA will add a functionality similar to the power button, to turn off&on the screen. Any comments from @Waxberry here perhaps? Suitable magnets we can inject in a flip-case are by far expensive. e.g this. Sen in portrait It

...For those that want a short-cut, it is available as an activity also, that can be launched by some launchers directly, or by tools creating a short-cut for 'any' launcher.

The more functionality they would add, the longer we would have to wait. But sure I too hope that more functionality is coming in later OTA updates.

Those that have not yet received the ordered phones should have a mail like this on the Coronavrus-situation.

There is a heavy pull on the battery in idle with absolutely nothing installed. Connected to WiFi doing nothing, over 2% per hour!!! ADD: It is the WiFi that seems to be the culprit, If I put it in Aeroplane mode, it is much much better. Fallen from 74% to 65% in 19h (or 0.42%/h to 0.53%/h - could in best case be from 73.50 to 65.49, or worst case from 74.49 to 64.50) I then in Aeroplane turned WiFi ON, and it has fallen from 65% to 10% in just 24h (or 2.25%/h to 2.33%/h - could in best case be from 64.50 to 10.49, or worst case from 65.49 to 9.50)

Well it might... See this 🤣

On the first, some have reported this too. It has been suspected to be related to what networks band is in use, and perhaps switch between these bands, though this is not confirmed. One reported the issues when parsing a partiular place by train (if I recall correctly) The second is new. 😥

That is the four glyphs long one no three after the GPS (after the battery and charger). It gives NO warning, but calls directly on click!!! "Hall_a" is in keyboard half close to camera button, "Hall_b" is in the display half, slightly above the volume rocker (ssn in portrait). I guess it is intended to detect a Flip-case closed!

Indeed, that have been changed to home. But tried Alt+Arrows with a lot of layouts including the four us intl, and can NOT get that to doing Back? I tag @Anssi Hannula here, to hear if this has accidentally been removed or moved to somewhere I can not guess,...

Maybe we shall find a better place for this windows talk. But that said it is still a mess with some settings in the new flat hell, and some in the good old control panel.

Let us not spin too much into specific other launchers. That we already have in other threads, e.g. this. This thread was intended to be on the build in and the pros and cons of it over others. Maybe we should just merge them completely?

Ah I see, well no imei, so.... (being super optimistic i gave it an active sim, but as it can not use it, it made no difference)

As @Hook said you most certainly can use many launchers out there. The most lousy ones does not support landscape at all. For many it is in a menu settings (some rather deep in!!!) to select it not to be portrait only. Most of the ones that DO support landscape, has their mind back when screens were in a 4:3 aspect ratio, so they just stretch&squeeze the grid. Still having full functionality, but often looking a bit odd in landscape, and many widgets does not handle it well to be twice as wide and half as high as they were originally designed for... A few launchers had taken th

Installed SFOS after all... And I can see it looks cool.😎 I have browsed through the thread, and maybe I overlooked something. But is it a known issue that I can not set the date&time, or I just being thick? When ever I try and click accept, it ignores it and selects a day two months back, and roughly 8 hours off . If I try to set it to automatic, I get the same time adjusted to Finnish time zone. This prevents my from logging on, as it gives me an errormessage. It also prevents me from using https, as the handshaking fails, and as MTP does not seem to be working, I can

And they did end it abruptly on June 18 (or short before), but then extended it, so the pre-order page said And that was mentioned in the forum too. I do not recall when they actually ended the limited offer, but I think it was late July. ...But if you browse back in this thread, you will find this has been discussed before.

How odd htat you are not allowed to request the device-info?!? Can you send a "fastboot reboot" ?