VaZso

I have read this sentence from Clove months ago and I found it strange. I don't know what they build this information on, but discontinued should generally mean something exact thing and I don't think it is true for Pro1 or at least they still fulfilling pre-orders and new orders can also be taken on their website. So I think writing "no longer available" is fair but writing "discontinued" is unfair at Clove's side or at least it can be misunderstood. However, on the other side - in my profession, we have some big wholesalers where we buy electronic parts. Sometimes I see some pa

I use PocoPhone F1.

It can take very good photos even in low light conditions using GCam mods, so it is possible...

I had a similar problem on stock Android when I had Button Mapper installed. It slowed down keypresses and I even had repeating keystrokes occassionally. I don't think the issue is Button Mapper itself but the way it subscribes too much possible keys - anyway, I don't have this issue since I removed it. Any similar applications may have the same issue I think. So I suggest to look at your installed apps and try to temporarily remove those which could be related (in handling keystrokes) and you may find the guilty one but generally the OS does not have such a problem...

Right. A lot of us have already received their order - including me - and they are still sending out units. I hope they can fulfill all of their current orders soon. This is a really good phone, so I hope others will also have this piece of rare style but very useful phone with a great keyboard (especially the non-shifted QWERTZ variant but this is only my own opinion as never used the shifted QWERTY one).

Long story sort, my problem seems to be a software / SD Card handling issue and not hardware-related. A few days ago, I have noticed my phone lighted up its display a few minutes fter I have connected it to charger, but in the morning, it seemed okay, however, it wrote I have to give my passcode after reboot - hmm. Later, it also restarted after charger connection and it was not able to boot up for a few hours (Android tried it again and again, so it is not a cold boot.) Then the latest update came on the very same day - I have installed it late evening / early in the morning, the

We don't know the background, be it a mistake (which are definitively also happened), contract-related or other considerations. Earlier, they may thought they will be able to produce pre-orders much earlier but they had some unexpected conditions like having light-bleeding problem, some other problems with earlier displays, some other quality problems, slower production scaling than expected, etc - these are affected manufactured device count and earlier contracts may had some clauses which may highly affect profitability. We know very few information regarding this, but unexpected c

Hmm, unsure. ☺️ You are right that his / her nickname is self-speaking. 😄

Do you know what you are talking about? I understand you can do something DIY but to design a phone (both electronically and mechanically), do correct measurements, design antenna system, design manufacturing process for mass production, do certifications, etc are another matter. It is a long and costly project and you also have to work on software side which also has some stages. Anyway, they have also reached that stage what you are speaking about a long time ago but it is only one part of the whole process. Also, you had a phone to work with and not counted the time and eff

Anyway, I am unsure, but may the low brightness colour issue improved? Maybe I was not looking at appropriate photo, but I have a feeling it may be better now. Also, I am not at home (so it is not latest firmware-related), but at this place, I have "4G+" sign in status row.

I have also called service provider's IVR system and I haven't noticed call is quieter than before... or at least it is still too loud.

I also feel the Pro1 hardware is more than enough and the keyboard is a huge plus, so I would not trade my Pro1 for anything else... However, about photos... have you tried GCam mods like "Poco F1"? It takes really good photos even in dark environment - so basically also its camera is good, just need a better software than stock one.

That is also not bad anyway. 🙂 I don't know how about stock Android, however, if a mail client also runs with IMAP Push and two SIM cards and also a relatively active usage, it lasts about a day for me...

...and another thing which is good to know is the Pro1 hardware itself seems to be not eating the battery too much when the phone is switched on. 🙂 So its power management / power handling seems to be good anyway.

Do you mean your Pro1 was able to survive almost a week in deep sleep and still has 25% capacity left? That is really impressive although the system doesn't really do anything in this state, but RAM refresh and maybe some wakeups happened during this period. Anyway, the UBTouch for Pinephone has recently improved to last about a day if I understood well. The ~1 week capability of Pro1 is really good anyway - does it wake up on phone call in this state (does it ring)?

That is also my hope as it is the closest successor of Maemo which may also have Android app support.

Right, that is what I did so far when I wanted to reach my files. However, I usually ended up using a more convenient and faster solution (I mean without using MTP).

Thank you. Unfortunately, it was written in C#, so there is no much chance to be compiled to run under Linux. However, maybe also MTP/PTP handling would be also different otherwise. ...but it should be a useful program for Windows.

For me, an up-to-date Maemo with Android app support...

Right, FinQwerty is mandatory for proper using of international layouts. Interesting... it seems I use both of them as small. ...maybe that was why I was wondering one of the web pages I often visit loads in a mobile-like outfit (it is a Drupal system which moves sidebars to the bottom if resolution is below 1024 pixels). However, it seems logical resolution is still below this value. I have tried this application and it looks good, but I had problems with my keyboard when it was installed (slower appearing of characters and unintended repeat of characters). Maybe it is b

Yes. I use "Poco F1" port anyway. I think not all versions were compatible with Android 9.

Thank you your detailed reply. Apart from these symptoms, when the phone starts properly, I don't feel any defects. Phone calls come up delayed but the phone works well otherwise. I will try the bugreport / logcat but I am happy it is currently working and I am afraid if I restart it, then I may not be able to boot it up again. Also, I am currently a bit busy and it is my daily driver, so if it becomes unbootable, that is a really bad situation for me. Maybe when my other Pro1 comes back from RMA, then I can start to experiment a bit more and find out what is the cause of my

Hi, I have a Pro1 since late December. I like it, I like the keyboard, it does not rattle more than it should and I have no problems with the screen apart of an always-on, but hardly noticeable pixel. However, since a while, I have noticed if I restart it, the starting of the system is hard (it is the stock Android). If I start using it, it complains about "system" is not responding, lock screen does not come up after unlocked, restart / shutdown does not work and not all applications are available... but it goes black after maybe a minute, then it restarts (it does not asks for

It may happen the system they use thought your message is spam with higher chance if you use your own (or corporate) domain which does not have proper SPF / DKIM records set. Maybe try to contact them using their web form.

This is a Lesser stag-beetle taken with my Pro1 on Saturday. I have cropped the photo. So it is the small variant of stag-beetle, maybe around 1.5-2 cm only.