Leaderboard

test8 is up, you know the drill by now. * a2dp should be working. * Added touchscreen margin/deadzone. * Added settings UI for keyboard and touchscreen (Settings -> System -> Advanced). NOTE: if you use a custom keymap (looking at you @Craig) note the keymap file has moved. The reason is that /persist should only be used for things specific to the device that are invariant, eg. physical properties. So it is now read from "/data/system/keyboard/keymap". The file contents are the same, just "mv" the file over to the new location (creating the directory first,

I believe I've found the issues with both the WiFi signal strength indicator and the notification lights. Both are broken because there are some Lineage specific changes that need to be applied to the kernel. So I'll try to get those working early next week. Details: The 1+5/5t (which is what I copied to start the pro1) has the WiFi driver built into the kernel and a couple other minor surrounding changes. The pro1 has the WiFi driver as a module (as the BSP does). The wlan sysfs node is in a different place for built-in vs. module, which is why the signal strength is broken.

Really glad to report back that after just couple of minutes under clear sky, it found some satellites and from there on it was quite smooth sailing as you would expect. For anyone interested what exact steps I took: went outside to make sure that nothing was between phone and sky (while staying connected to my home WiFi) used GPS toolbox (or is it GPS Status?) to reset my data and download new A-GPS data -- at this point I still was not able to find anything went for a walk to see if anything changes and after 1-2 minutes (or leaving my WiFi network coverage?) my phone

Parity....if you don't include those things LOS does that stock doesn't do. 😉

I took some time today to organize the issue list, add labels, and such. Things are looking pretty decent. For example, here is what remains for parity with stock: https://github.com/tdm/android_device_fxtec_pro1/issues?utf8=✓&q=is%3Aissue+is%3Aopen+label%3Abug+-label%3Astale

I am abslutely agree with you. He alone made a lot of progress for Pro1 to also have a perfect software. He is also active on this forum so we can see what happening and also can check his work - while we don't even have information about progress of stock firmware (if there is any progress at all currently). So, @tdm, thank you your work.

Okay I'll put that on my todo-list.

Glad I could help. First GPS fix after moving to the other side of the planet can be tricky.

Looks like we have quite a few lurkers... https://stats.lineageos.org/ 😀

BTW it would be great if the two edge margins were handled independent. The Keyboard-edge can take a lot more margin than the opposite without affecting functionality. And it is the side that is most prone to accidental touches both opening by pushing, and for entering numbers.

The keyboard driver only polls when at least one key is pressed. When no keys are pressed, it uses interrupts. So there should be little concern for the CPU usage. I could even get rid of the option and always use 20ms. I just preferred the longer delay because I could not detect any keyboard lag at all with 40ms. Also note that there is still one more optimization that I would like to make for the keyboard, which is a hybrid interrupt/poll mode. In this mode, the driver would only poll on the rows that have keys pressed (it is currently all-or-nothing). This would reduce the work

Maybe it does not like that window. Ideally go outside with a clear view of the sky and stay put until you get a fix.

I looked at the fingerprint stuff briefly today. Unfortunately most of it is closed source (even in the BSP -- the OEM tossed binaries into the device tree). So I need to come at it from either the kernel side or somehow override/shim the frameworks side.

That is Pie. There are no warning that you forgot to turn off Bluetooth. Same on a galaxy S8-

For whatever reason it only appears when it is actively paired - not in standby. Is that the same for everyone?

Stupid Pie. Is that something that was fixed with Quinoa?

It's not so much a matter of the work involved. It would be very quick and easy to provide four sliders. But I think that makes the UI way too complicated. My criteria for options is not just implementing something that somebody wants or even needs. It is more like: (1) is this needed and/or reasonable? if no, reject. (2) is this something that everyone needs or is benign if always set? if so, just do it without an option. (3) make an option in the simplest, clearest way possible. I'll look into adding a visual indicator in the settings widg

I think it is much a user-dependant thing. When opened I'm yet to experience accidental touches clicking the numbers. But it requires more care opening. Personally I ONLY have problems with the edges when it is closed. Not when opened. Others have huge problems clicking the numbers. I would say the thumb-width is what matters. So I would prefer a setting. But when you got one slider, would it be much work to copy and paste to four? Giving the user complete control of the two edges, opened and closed. You MIGHT even add a tick-box (default set) "Same margin", that links

Actually I think increasing the left margin when the slider is out might be a better solution. I'm just wondering if it should be a multiple of the user margin setting (1.5x? 2.0x?) or a fixed number.

Sad to hear you don't like it. 😥 But glad to hear you are not in it for the profit. 👍

When doing images comparing the toning of either white or black, I strongly suggest doing it at a real white background, as the white balance of the camera can easily get confused and show things either better or worse than they actually are. I often use a bright red table for background of device photos, for the nice effect of it. But the downside is that it can come out in the digital images as anything from pink to burgundy, and even orange some times. Sorry to hear, hope you come back at a later time. 🙂

I have a very early prototype that has reduced edge sensitivity... a built-in margin. 🙂 It also has zeros for IMEIs which makes it unsuitable for testing radio things. So I was provided a near-production prototype that has valid IMEIs and also better edge sensitivity. I use the earlier one for stock and the later one for lineage.

@tdm fyi, the a2dp commit also fixed the crackling audio problem. Makes sense as one of the things I noted when the issues was occurring was an error stating "AUDIO_FORMAT_PCM_16_BIT" was an invalid format. Bad-ass.😎

Working well here. Thanks again.👌

You should see the options in the system section when you select "advanced".

Hi Just registered an account here since Fxtec support (info@fxtec.com) seems to be ignoring me and I thought maybe community can give some tips here. I am having trouble getting any GPS lock on my Pro1 and am wondering if its a hardware issue. I've tried restarting the phone, switching the location on and off, switching airplane mode on and off, switching battery saver on and off. Today I downloaded GPS Toolbox and A-GPS data using it but it just says that it is searching for GPS location and does not find anything. I have run out of ideas what to do here. Am I missing som

Yeah, could be a faulty assembly, in which case you will have to wait for support to come back to you.

Yes, Wifi was enabled and during those minutes I was walking outside of my home wifi network coverage and back in again. Also connected using 4G so phone itself had internet access at all times. Let me check, I'll walk for couple of minutes, see if the GPS Toolbox thing did something or not. I never had any GPS problems with other phones though 😕

Your internet connection is working right?

Where do you live? How long did you wait for a fix? First fix can take up to 15 mn without AGPS.

A unique ID is generated at first boot after a wipe. When you opt-in to stats, it sends the ID and device model every 24 hours. I believe the page counts the last 90 days. So this is the count of active devices that are opt-in, with duplicates for each time you wipe.

So, does that mean 98 downloads or can it tell how many unique Pro1 devices are running it?

What happened to the idea of printing a 2 pieces case with a 3d printer? Seemed to be the best idea for a case? 2 times the same Idea, sorry didn't See this Post before

I have an SD card installed in the big slot and the sim in the smaller slot. My phone seems to show that as sim1. So that would mean that sim1 is deeper.

No rush. Just thought I'd ask, in case (no pun intended) I missed any info. :-)

It might not be so, it COULD be that the exact same issue would show it self on another specimen. What worries me here is the warming up. The SIM2 SIM1 sits deeper in than the SIM1 SIM2, so it will feel the heat first, and it just MIGHT put it outside its working limits. corrected, it is the other way round, so that is not the explanation. But one SIM might be more robust than the other? Reading for 40 minutes should not really make the PRO1 warm. I have not tried to use it for reading that long though...

Good thinking there.

For the BB Priv it works really well BUT that is because the Priv got two chrome strips above and below the display, that protect the protectors(!).

Just keep in mind that this app only works because SELinux is not enforcing. Normally apps wouldn't be allowed to do that (side note: why are the discretionary permissions even allowing this?). So when the build goes official, that app won't work anymore.

Incase tdm doesn't or until he does implement, JJB has written an app that does just that (add quicksettings toggle), specifically for lineage on our device. Of course I'd also prefer it as a built-in feature, but this does do the job nicely. https://community.fxtec.com/topic/2721-kb-backlight-manager-for-lineageos-builds

There once was a man from Ohio While in search for a phone he went psycho He then found a brand new one When he thought that there were none But he did not at first know the logo. Its full keyboard laid out so neatly The potential for typing so clearly F(x)tec they were called They were new from abroad "I must have it!" he exclaimed emphatically. Pictures and videos began to emerge Diligently the man did his research One day his said "Screw it" His budget, he blew it For this phone he decided to splurge.

I thought of one other. Some dos games use control or shift keys separately. So, an option to make the right slant arrow into right shift or right control could prove useful in some situations.

The BSP uses a feature called "split a2dp" and handles a2dp in the audio HAL. This is proprietary and does not work with the open source audio stack. So Lineage does not use it, a2dp is handled by the AOSP code. In order to make this work, the audio configuration needs to be updated. Because of the way audio works in pro1 vs. 1+5/5t, the audio configuration file is in a different place (/vendor/etc/audio vs. /vendor/etc). I neglected to update the correct file. As soon as I updated the correct file, it started working. There are a couple other related changes but that's the big one.

Hi! Yes, it is something we are looking to use in the near future - in fact I would be the one looking after it 🙂. It will be out as soon as we can allocate more workforce to post-launch support tools.

I just tried swiftkey. I was hoping/expecting aosp keyboard and/or gboard would provide suggestions once we were set to alpha, as thats what the documentation seems to imply. However, it doesn't seem to be doing it so far (under lineage which sets it that way), so I finally gave swiftkey a try. Swiftkey seems alright so far for suggestions, but one looses the emoji and symbol keyboard shortcuts available in aosp/gboard. So if I wanna type £ with aosp/gboard I could press sym then select it on-screen, but cannot with swiftkey. Fortunately, I can still longpress $ and select it

As a preorderer I would easily pay 100€ more for no accessories but the phone itself.

As a pre-orderer [sic] I would easily scrap the earphones for a proper case or discount towards a case.

My biggest concern is that fxtec goes bankrupt because of corona. 😞 They can't produce and therefore sell phones and earn money right now. Who knows when the factory is able to start producing again... And no, it is not because of money, I just want my pro1.. And I hate my dying Priv every day a little more..😫 ( sry for the last part, I just had to vent 😌 Btw. I preordered on May 17th, paid on Aug 13th and received an "order received" mail on Aug 20th. QwertZ)

Thanks to @Raksura for posting this in another thread, but let me put it here too, for more to see the progress.

Thanks for including the link to the dev page. Installing a "random" APK from a google drive that requires root doesn't seem safe. Not that I particularly trust it now that I have the dev page though, would've preferred to see the source code or something. But thanks.