Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 11/27/2020 in all areas

  1. https://community.fxtec.com/topic/2559-factory-restore-tool/ Give this a try, might work out for you //Per
    4 points
  2. First of all I would like to say I've been on quite the quest for a handheld device like the Pro1. I'm a Linux sysadmin and Linux enthusiast. I have Linux on both my home and laptop computers. I have a customised desktop environment containing my workflow made up of scripts and programs I created over time to make me more productive. My quest has been to find a device that let's me work in the Linux environment at an actual usable level while on the go. Well, I can safely say the Pro1 is that device! In the picture above is my Pro1 running Arch Linux inside a chroot with full r
    2 points
  3. It is a factory restore tool, not reset. It can be used to write stock data to flash. If it works, then your phone should work again. If your flash is faulty, then it can not write this data.
    2 points
  4. Okey dokey. Here's an update on my shenanigans. After digging about I found this in Windows after plugging the phone in via USB. But can't do nothing with it except check the "Properties" .
    2 points
  5. Getting a standard Linux install running on SailfishOS is pretty easy, thanks to containers. Hardware acceleration isn't available for those containers, as far as I know, so it might not be the best solution to play games.
    2 points
  6. Apps are using different ways to detect if the phone has been modified. Some apps check root and others bootloader or SafetyNet status. See my post earlier for more information. If you root your phone with Magisk and use Magisk Hide module you can make many apps to work. Then you can go even further and change the decive fingerprint to "Fxtec/QX1000_EEA/QX1000:9/PKQ1.190723.001/05500.20Q202:user/release-keys" from stock with Magisk Hide Props Config. After that trick the phone will pass SafetyNet check. There are also ways to patch custom ROM to pass SafetyNet but the trick has to be
    2 points
  7. I'd say LOS is probably your best bet, things are nicer without google services simply - no demanding your google account, no questions about how you liked the supermarket you just passed by, etc. Also it's probably more polished and stable than the stock rom at this point. Also keep in mind as long as you can use a computer, it isn't to hard to switch if you don't like the choice ordered and the only real difference ends up being the engraving :).
    2 points
  8. The main drawback of LOS over Android is that some apps may not work. Disney+ for instance or some app doing extra security checks, like banking app or Microsoft Authenticator maybe?
    2 points
  9. When you press the power button for maybe around 15 seconds, it should restart the phone. I mean restart by hardware, so even if the software stuck somewhere. What happened with your phone before you found the issue? So have you used it? What charge should it have by that time? I have not heard of similar issues but when my friend's phone produced a similar issue, I could switch off that phone by holding power button and it turned on, but it only appeared as a USB device after around 15 minutes. That was some kind of fallback to EDL mode (that is how it has identified by) and th
    2 points
  10. This is intended as a central entry point with links to known ROMs for the PRO1/PRO1X. You will need android adb / fastboot tools that officially can be found here (Windows / Linux / mAc) Important step BEFORE changing from Android initially!! If you want to ever be able to change the phone back to the state it had when you received it with stock Android, there is an important step that is needed before flashing any non android-based ROM, That is to backup the persist partition. If the device is unlocked and a recovery boot is present a fairly simple partition backup method (fo
    1 point
  11. Hello there, I've been using my Pro1 now for approximately four months and the input issues (ghost input) seems to get worse and worse. For some time I've been documenting the ghost input and it definitely shows a pattern (list below). It feels like somebody smashed my keyboard every now and then and it occurs very frequently that I have to write a word three times since ghost writing occurs repeatedly. Apart from ghost writing I have tab/alt keys pressed (tab+space is often enter/send since you get tabbed to the next button), key menu popup (í instead of i), missing keys or double s
    1 point
  12. A brief update... I've been working on a backup/restore solution for Linux (plus an Android app to drive it) that will be able to do full backup/restore, similar to TWRP. This is a bit of an involved project, but it will be well worth it in the end. It will be cosmetically similar to tar on the command line to make it familiar to use, but it is an entirely new code base. Some of the features include: A client/server mode for use in Android and other privilege sensitive environments. Built-in compression and encryption support. The Android app will mo
    1 point
  13. 1 point
  14. I've had a good read, but I don't think any of the first two methods would be of help, as I don't want to dismantle the phone at this stage, due to the warranty. The last method needs the phone to actually turn on and display the Fx logo. I'm not getting that even with both volume buttons held and the power button pressed.
    1 point
  15. Thanks Pebert. I'll give it a looksee. But doesn't the phone need to be powered up to perform a factory reset?
    1 point
  16. I really thoughht mine had a physical fault too as it too used to insert numbers into words or move the cursor around the screen-- it was often unusable. I thought one key was influencing another electronically but now on LOS 17 I would say it is 99.9% fixed with respect to the keyboard. Android is completely new to me and even I managed to do a non-destructive update to my Pro1 and keep all my data! Of course you could still have a physically damaged keyboard causing all of your issues but I would be interested to see if the update to LOS 17 helps your typing issues (I have no
    1 point
  17. Bad advice. There is a small connector on display part that can be damaged during the disassembly..
    1 point
  18. Damn thing! Was just getting used to using a hardware keyboard again. 🙄 There isn't any life from the caps lock light either. I'll keep trying once in a while until I get a reply from the guys at Fxtec.
    1 point
  19. What are the major differences between OS choices? Which would you recommend for a non-tech savvy user? I don't think Ubuntu has any use for me, so I'm deciding between Lineage and Android. I don't really care too much about the privacy differences. I do care about which is better supported and less buggy. I also care A LOT about any differences in ease of use, especially regarding handling keyboard inputs. For example, does one OS allow you to tap shift and capitalize the next letter pressed rather than having to hold shift? Stuff like that, which will hopefully make it feel more like my
    1 point
  20. I'm on Lineage and sticky shift works more on an app by app basis. WhatsApp, Messenger, Firefox, Discord... they all work fine with sticky shift. But then I write a mail in GMail and suddenly I have to hold down shift again to get the next keypress to be upper case.
    1 point
  21. How long did it take for them to replace it? As much as I understand many people haven't even received their phone yet so I don't expect them to hurry for replacement phones. I'd feel much more comfortable just opening it myself and maybe change some parts. Also it's strange that it mostly happens when the phone is under load, shouldn't it be a software issue then?
    1 point
  22. Grasping for straws here, but does the caps-lock button affect the caps-lock LED?
    1 point
  23. I had the same behavior with the stock camera app, clearing data/cache for it in settings->apps fixed that (it seems permanently). My best guess is that an updated version of the app can't cope with the data from the original version that comes on the phone. Also my friends never complained of video quality, but they're used to me using a potato cam so I'm not sure that means anything xD.
    1 point
  24. I would try a usb-Volt-meter, and see if any current are drawn. If I recall right someone had a device where the connector between the small usb-pcb and the main pcb had gotten loose, with a little luck it is similar. But all is rather strange if it was as high as (roughly) 75%, as this should last very long with the device/display off.
    1 point
  25. The LED is switched on by software, so for charging indication, some part(s) of the software should boot up. My friend's phone which had flash (UFS) problem also did not have charging indicator, but it was charging anyway.
    1 point
  26. Pressing the power button does nothing. I've held the button in for over 5 minutes. The battery had around 75% charge at the time of it shutting down. When the charger is plugged in there's no LED. It should at least light up red to indicate the phone is charging, even while it's turned off. The last thing I did with the phone was to check the time of the bus over mobile data. I had made 2 calls and received 1 prior to that as well as checked emails. Now it's deader than a dead thing.
    1 point
  27. Sounds like an electrical issue with your keyboard. I had something similar. They replaced my phone.
    1 point
  28. Yeah, I've seen seen between 9 - 13 days standby times reported by Kaspersky Battery Monitor. Worth a try to leave it for a week or two.
    1 point
  29. actually, this happens to me a lot on my nokia 6.1 ,,, the trick is you have to let it completely die .. don't charge it for few days and then connect the charger... but the standby time on the fxtec is like a good 10 days lol.... but maybe try this method? don't charge it for a few days and then connect the charger... even from different sources and cables?
    1 point
  30. I'd rather not whilst it's still in warranty.
    1 point
  31. sounds like they're out to get you.
    1 point
  32. If you have access to the battery I'd check the voltage of it. But I don't expect him to dismantle his phone while being in warranty.
    1 point
  33. The strange thing is, I had just used it on mobile data to check for bus times, boarded the bus then opened the case and there was nothing there. Kept trying to restart it then swapped the sim out into my Jolla 1. I then used mobile data on the Jolla, to check delivery of an Ebay purchase, then the Jolla died, but that restarted again and is still working fine.
    1 point
  34. Yeah, tried that one too. It's as the proverbial dodo. 😥
    1 point
  35. have you tried holding the powerbutton for a long time, like basically forever? (30sec or so irl)
    1 point
  36. Tried the PC first, then plugged it into the wall. Been plugged in for about an hour now. 🤔
    1 point
  37. How about going to the wall rather than a PC? This is kind of a repeat of the how long did you leave it question. 😉
    1 point
  38. Yup. Using both Pro1 charger and original cable. PC doesn't even pick it up when I connect it. Fired off an email to support, see what happens.
    1 point
  39. Are you using the charger it came with? If the battery got very low, it may not respond well to other chargers. How long did you leave it plugged in. Id leave it a few hours and see what happens.
    1 point
  40. Otherwise just sell it to me, I have realized that the QWERTZ keyboard is better for Swedish. And, I also realized that one device isn't enough for doing all the software evaluation I want to do.
    1 point
  41. I ordered mine on January 28 2020; still waiting.
    1 point
×
×
  • Create New...

Important Information

Terms