EskeRahn

This was NOT a Burglar...

Either method works with marginal difference equally well with and without a modified Note7 case. Though the push method gives an awesome clack when it opens, lifting the back is a more silent and more discrete method. So I tend to use the lift method

If you look in the bug thread he actually had troubles with the 2MB limit - so had to split *LOL* ...So now you have an excuse to use hi-res renders... 🥴 (I was not even aware there is a leaderboard. And it clearly shows I have troubles shutting up 😇)

You jumping, or having a large dog? 🤣 **OBS** Moved reactions into off topic thread here:

...and what about e.g. animals? There are no end to this off topic spin off.... 🥴

#MeToo

Yup, I've seen that too, but forgot to report it.😔

Yeah, sadly you are right. Have a look at @abielins link a few comments above

I'm quite sure that is the second batch, Strictly we do not even know if the second batch is large enough to cover all pre orders. See this from Erik some days ago https://community.fxtec.com/topic/2447-on-the-production-status/?do=findComment&comment=32973 but we are guessing again,

No no, your advise is fine, It was just a hint to FxTec, if they do not, they will likely get mails from people asking.

Yeah but if they sent out the info, they could save themselves a lot of support mails to handle...

...And you have likely already upset someone in a LGBTIQ+ segment trying to be political correct... 😜

Guessing here, but I assume they will send out a similar mail on "stock assigned" for the second batch, when it has left the factory. So that should clear any doubt on second or third.

I remember the Iphone 6-, it was close to impossible to hold without a case of better material, it was slippery as a piece of soap. When I got it and showed it to some friend, I always made sure they sat in a sofa, and they all (but one) dropped it while playing around with it the first time!! And we had a good laugh afterwards when I told that it was exactly why I was so keen on them sitting in the sofa when I showed it to them, as I did the same thing when I got it. *LOL*

And you should make sure to never have the sleeve with the opening upwards in your pocket, or you will be left with a sleeve in the pocket, and the phone on the ground, as the friction between the pocket and the sleeve is likely to be bigger than between the sleeve and the phone.... Unless it is so tight that it is hard to get out of the sleeve - and that would be a daily nuisance... In my experience most drops is in/out of pocket OR when a kid or dog 'bumps' into you while using the device. A jumping playful dog that wants to get your attention can cause havoc....

Sorry to mess it up, now it is 101 😜

Oh yes, but I take it for granted that it is handled in a couple of years when we want to upgrade the Pro1

....Just cut away the credit-cards pocket of the flip case. Reduced the thickness to 2.5cm, and reduced the weight from about 65g to 60g

You will have a hard time finding "plastic pieces"... 😜 Though of course there are plastic. I think the buttons and keys are plastic,

The cost is not what is worrying me either (£20 would be 3% of the device price). But the added clumsiness is not welcome. I have considered cutting away the credit-card pockets. Just extra thickness, and I can not imagine I would ever use them for anything.... So they could (please) skip those for a dedicated case. The whole idea of a flip case is not appealing to me. The extra steps to get to the device are hardly worth it for me in the long run. BUT the flip case looks less repulsive mounted, than the shell on the lower part only. ADD Also the function is dubious to me. The risk o

The changes that needs to be done are so small so any case maker could make a Pro1 case/shell, I see no special requirements, it is a matter of the volume they could sell if they would bother to do so, more than anything else. (Anyone could do the modifications similar to what I did to this £4(+2) flip case in less than an hour, unless they are REALLY clumbsy) I do not know what put a break on the dedicated Pro1 shell. Maybe they simply decided that they could not find a way where a shell would not make this slick and exclusive device look like cheap crap... They could fear that if t

The holes are for the speaker, so similar holes could be made in the other end for the Pro1, if you want to talk with the case closed - could make good sense. Well on next gen a few years ahead i assume all devices will have under the screen fingerprint sensor, so that goes away by it self for a Pro2. It is not the placement that is the issue though, it is how big a hole you can cut without the base part loosing the grip on the phone. I just took a chance and opened it up - problem gone 😁, and no reduction in the grip. I doubt I could do the same on a soft shell, but on a stiff shell it

I got the "Stock assigned" mail on nov 4. for the QWERTZ device I ordered with IGG coupon) Nov 15 13:24 CEST Got tracking code. UPS to Denmark 😎🥰 Nov 19. 13:15 CEST Delivered!

Did anyone say it would? 😲

Indeed, but the request i answered was for reviews, and though not on the released final product, they are there. And there are no reasons to expect that the released units are deteriorations over the prototypes. The "Final sample" I have been testing are in all but cosmetic details the same functionwise as the early prototypes - it 'just' got to be a more polished/finished product.