david 921 Posted January 30, 2020 Share Posted January 30, 2020 38 minutes ago, sequestris said: Ah. I'll take a picture of it. I believe @EskeRahn means that if you got a second one and put it on the bottom, then they might bump into each other and not allow the phone to close all the way. I only have 1, so I can't test that. It certainly does protect the screen, but at the cost of clarity and the front facing camera would be affected too, but holes could be cut for that. Congrats on the most bullet proof screen protector known to the Pro1 world at this time. 😉 2 Quote Link to post Share on other sites
sequestris 710 Posted January 30, 2020 Share Posted January 30, 2020 15 minutes ago, david said: I believe @EskeRahn means that if you got a second one and put it on the bottom, then they might bump into each other and not allow the phone to close all the way. I only have 1, so I can't test that. It certainly does protect the screen, but at the cost of clarity and the front facing camera would be affected too, but holes could be cut for that. Congrats on the most bullet proof screen protector known to the Pro1 world at this time. 😉 Thanks and Thanks. I will hold off on getting a back one at this time - the front/screen are my primary concerns. Quote Link to post Share on other sites
sequestris 710 Posted January 30, 2020 Share Posted January 30, 2020 50 minutes ago, D1ggs said: I like how you time your melatonin. I'm guessing bedtime is 10pm 😂? That's when I totally take mine too! i have a reminder to feed my cat too. If I don't, I will forget, she will be mad, eat my face while I sleep...bad things will happen. 2 Quote Link to post Share on other sites
sequestris 710 Posted January 30, 2020 Share Posted January 30, 2020 And @david - take less selfies 😆 Quote Link to post Share on other sites
sequestris 710 Posted January 30, 2020 Share Posted January 30, 2020 Guess what else perfectly fits the phone?https://www.walmart.com/ip/Body-Glove-Large-Universal-Phone-Clutch-Pink/503728045 Quote Link to post Share on other sites
sequestris 710 Posted January 30, 2020 Share Posted January 30, 2020 Picked one up today. Go Wally World! Quote Link to post Share on other sites
sequestris 710 Posted January 30, 2020 Share Posted January 30, 2020 (edited) 2 hours ago, EskeRahn said: Yes please anyone, tell if you see them sans motive.. https://www.ebay.com/itm/New-PU-Leather-Flip-Wallet-Book-Case-Cover-Pouch-For-Samsung-Galaxy-Mobile-Phone/172299270135?hash=item281dd637f7:m:mY7eHPLTB0XdI5ogmFkTFkw Check this one out. Trying to find alternate views Edited January 30, 2020 by sequestris Quote Link to post Share on other sites
EskeRahn 5,421 Posted January 30, 2020 Share Posted January 30, 2020 1 minute ago, sequestris said: https://www.ebay.com/itm/For-Xiaomi-Redmi-Note-8T-8-7-6-Pro-Case-PU-Leather-Stand-Wallet-Flip-Phone-Cover/264556798735?hash=item3d98d0630f:m:mSqvOPooMWJa0eA5pb9czeg Check this one out. Ah sorry. what I meant was flip cases with the fancy slide function like the ones you found, but boring ones without a motive on the front. I haven't checked which of the Xiaomi ones you linked that fits best. Quote Link to post Share on other sites
david 921 Posted January 31, 2020 Share Posted January 31, 2020 27 minutes ago, sequestris said: And @david - take less selfies 😆 I'll try to cut back. :-) 1 Quote Link to post Share on other sites
sequestris 710 Posted January 31, 2020 Share Posted January 31, 2020 34 minutes ago, EskeRahn said: Ah sorry. what I meant was flip cases with the fancy slide function like the ones you found, but boring ones without a motive on the front. I haven't checked which of the Xiaomi ones you linked that fits best. Check out the second (edited) link - those are all blah. Quote Link to post Share on other sites
OliverTypes 152 Posted January 31, 2020 Share Posted January 31, 2020 Out of the box, love it! Could head accumulation become an issue? Quote Link to post Share on other sites
sequestris 710 Posted January 31, 2020 Share Posted January 31, 2020 Just now, OliverTypes said: Out of the box, love it! Could head accumulation become an issue? I would answer that if I knew what you meant :D Quote Link to post Share on other sites
Polaris 423 Posted January 31, 2020 Share Posted January 31, 2020 @OliverTypes I have quite the response, but I can't figure out how to get that hidden contents box in my response, so you are spared. 😁 2 Quote Link to post Share on other sites
Craig 1,435 Posted January 31, 2020 Share Posted January 31, 2020 16 hours ago, lameboyadvance said: ...And I just found the case type I was looking for on AliExpress, for $4.07 (cheaper than eBay, as usual). https://www.aliexpress.com/item/4000114115816.htm ...If only they made this version with a fold out card section like the earlier case, then removing it to add depth for the Pro1 would be a lot easier/neater. https://www.aliexpress.com/item/4000054782975.html Unless you're purposely trying to show of the Fxtec logo thru the case, the one above looks similar, available in lots of colors, but doesn't ahve that round hole in the middle, and also opens book-ways..... Quote Link to post Share on other sites
david 921 Posted January 31, 2020 Share Posted January 31, 2020 50 minutes ago, Polaris said: @OliverTypes I have quite the response, but I can't figure out how to get that hidden contents box in my response, so you are spared. 😁 I'm not even going to touch this one. Quote Link to post Share on other sites
sequestris 710 Posted January 31, 2020 Share Posted January 31, 2020 1 hour ago, david said: I'm not even going to touch this one. ME neither! 1 Quote Link to post Share on other sites
lameboyadvance 98 Posted January 31, 2020 Share Posted January 31, 2020 2 hours ago, Craig said: Unless you're purposely trying to show of the Fxtec logo thru the case, the one above looks similar, available in lots of colors, but doesn't ahve that round hole in the middle, and also opens book-ways..... The picture is likely a 'stock' image of one of the dozen or so other models they also sell in their listing. Also, the listing you linked is for the 'reversed' single latch design, that one might come in handy for people who might find the standard clip-over-the-front style latch gets in the way. The style EskeRahn apparently uses (and I'm considering) has a split latch design where half is on each side of the flip case, making it 'smaller' and less obtrusive. 1 Quote Link to post Share on other sites
everlast4308 30 Posted January 31, 2020 Share Posted January 31, 2020 @sequestris, you inspired me to try the clear case on front, and I was curious about @EskeRahn's concern of two cases fighting each other for grip in the gap between screen and keyboard, but at least with this combination of cases they seem to hold snugly while open, while closed, and while actively opening/closing! It's very promising! Also -- at least for me, this DRAMATICALLY improves my ability to casually flip it open, without having to think about it so much. 7 Quote Link to post Share on other sites
_DW_ 628 Posted January 31, 2020 Share Posted January 31, 2020 8 hours ago, sequestris said: Guess what else perfectly fits the phone?https://www.walmart.com/ip/Body-Glove-Large-Universal-Phone-Clutch-Pink/503728045 that ones not quite to my taste 😂😂 2 Quote Link to post Share on other sites
_DW_ 628 Posted January 31, 2020 Share Posted January 31, 2020 9 hours ago, EskeRahn said: Ebay won't let you Also won't let you ship to the UK from that seller 😞 Quote Link to post Share on other sites
_DW_ 628 Posted January 31, 2020 Share Posted January 31, 2020 8 hours ago, EskeRahn said: Ah sorry. what I meant was flip cases with the fancy slide function like the ones you found, but boring ones without a motive on the front. I haven't checked which of the Xiaomi ones you linked that fits best. Yeah it's the slide function which appeals as no case modification would be needed 1 Quote Link to post Share on other sites
EskeRahn 5,421 Posted January 31, 2020 Share Posted January 31, 2020 1 hour ago, everlast4308 said: @sequestris, you inspired me to try the clear case on front, and I was curious about @EskeRahn's concern of two cases fighting each other for grip in the gap between screen and keyboard, but at least with this combination of cases they seem to hold snugly while open, while closed, and while actively opening/closing! It's very promising! Also -- at least for me, this DRAMATICALLY improves my ability to casually flip it open, without having to think about it so much. Indeed it should be doable, and it certainly makes it even easier to open with the better edge-grip. But as can be seen on your first image, the two parts are slightly misaligned because the mechanism can not close completely, but is stopped 1-2mm short. Not a big deal, but not ideal either. But it is certainly an idea that could be worked on! I would suggest to have the upper part grabbing by the long edges and the lower in a stiffer material grabbing by the short edges. Interlocking inspired by what the below does on the full sides, we only need the 'lip' area shared for the Pro1. 1 Quote Link to post Share on other sites
lameboyadvance 98 Posted January 31, 2020 Share Posted January 31, 2020 1 hour ago, EskeRahn said: I have seen these cases for the P20, I am currently looking for a version for the Elephone U, since that is the screen that mostly matches the Pro1. I may end up having a P20 Pro case on the back of the phone an an Elephone U cover on the front. 😜 1 Quote Link to post Share on other sites
lameboyadvance 98 Posted January 31, 2020 Share Posted January 31, 2020 (edited) ...Sadly it doesn't look like they make that model of phone case for the Elephone U... ☹️ ...I did however come across a few 'universal' bumper covers. Any chance they could be modified to encase the screen (or even the rear) portion? ...Then again, if the P20 Pro rear case fits over the front of the Pro1, maybe the front half of those P20 cases would also fit? Edited January 31, 2020 by lameboyadvance 1 Quote Link to post Share on other sites
lameboyadvance 98 Posted January 31, 2020 Share Posted January 31, 2020 (edited) ...I keep coming across these 'universal' bumper cases that are basically rubber strips with extra padding in the corners. Think they could be modified to possibly fit both halves of the Pro1? https://www.aliexpress.com/item/32868048401.html Edited January 31, 2020 by lameboyadvance 3 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.