RalphKey 0 Posted May 19, 2022 Share Posted May 19, 2022 Fxtec Pro1 for sale! https://swappa.com/listing/view/LWFI10539 Quote Link to post Share on other sites
OKSun 103 Posted July 5, 2022 Share Posted July 5, 2022 (edited) I am selling my pro1. See the other thread for details. Sold Edited July 14, 2022 by OKSun Quote Link to post Share on other sites
Spider-Dan 25 Posted July 14, 2022 Share Posted July 14, 2022 (edited) I have a factory refurbished QWERTY Pro1 for sale. $650 shipped within the US. edit: SOLD Edited September 30, 2022 by Spider-Dan sold 1 Quote Link to post Share on other sites
Spider-Dan 25 Posted July 14, 2022 Share Posted July 14, 2022 For some additional detail on the above: I was having a screen issue and I sent my phone in for repair back in April 2021. I received "my phone" back late last month, but it has a different IMEI and the few cosmetic scratches I had on my phone are gone. If I had to guess, I'd say they just gave me a brand new phone instead, but it didn't come in a retail box so I can't say that for certain. So I'll go with "factory refurbished." 2 Quote Link to post Share on other sites
DieBruine 397 Posted July 14, 2022 Share Posted July 14, 2022 5 hours ago, Spider-Dan said: For some additional detail on the above: I was having a screen issue and I sent my phone in for repair back in April 2021. I received "my phone" back late last month, but it has a different IMEI and the few cosmetic scratches I had on my phone are gone. If I had to guess, I'd say they just gave me a brand new phone instead, but it didn't come in a retail box so I can't say that for certain. So I'll go with "factory refurbished." At least now I know who has my phone. This phone was used for one week, indoors, by my daughter. She then decided it was time to abandon the physical keyboard. A year later I tried to boot it, it wouldn't. FxTec replaced the screen and battery. Same mark, look at the picture. Pretty annoying you have my phone. But, I wish you and/ or the new owner the best of luck with it. I'm not going through the shipping idiocracy again... 2 2 Quote Link to post Share on other sites
Spider-Dan 25 Posted July 15, 2022 Share Posted July 15, 2022 I'm not sure what you're saying. You never received a phone back from them? Or you got a different phone back instead? Quote Link to post Share on other sites
DieBruine 397 Posted July 15, 2022 Share Posted July 15, 2022 I'm saying that I received two different phones. And that the phone that is now in your possession, is actually mine! I would have to look at the box or dig up the original image. But if you look at the upper right corner at the back, you will see a scuffmark. It is identical to the one on the phone you now have in your possession. Also the two dots on the back and I think a third next to the sticker. I had it stored in a PU case, that's how those dots came to be (size of a grain of sand). Anyway, it should help you get it sold. I was told they replaced some cables, the screen, and the battery out of service/ courtesy. And I'm telling anyone interested, this is the most unused Pro1 you will likely find. This is the one (out of four) I was planning to keep. But because my phone died I had to start it up. And I am still waiting for my Pro1x. Good luck selling it 😉 Quote Link to post Share on other sites
DieBruine 397 Posted July 27, 2022 Share Posted July 27, 2022 (edited) Sold Edited May 14, 2023 by DieBruine 1 Quote Link to post Share on other sites
EskeRahn 5,421 Posted July 27, 2022 Share Posted July 27, 2022 54 minutes ago, DieBruine said: Pro1 with Snakehive handmade leather cover € 675,- including track and trace shipping insured up to € 500,- anywhere in the world. Now that is a tempting offer.... Had it been qwertZ it would be been hard to resist it... My keyboard is beginning to act up giving double strokes on several. But after almost three years daily usage that is acceptable, and a Pro1X hopefully should be delivered soon here too... 1 Quote Link to post Share on other sites
DieBruine 397 Posted July 27, 2022 Share Posted July 27, 2022 16 minutes ago, EskeRahn said: Now that is a tempting offer.... Had it been qwertZ it would be been hard to resist it... My keyboard is beginning to act up giving double strokes on several. But after almost three years daily usage that is acceptable, and a Pro1X hopefully should be delivered soon here too... So I should have kept the previous one they sent me 🤣. 4 Quote Link to post Share on other sites
Logan 22 Posted August 19, 2022 Share Posted August 19, 2022 I'm debating if I would be better off selling my Pro1-X new in box or open box. Thinking that maybe I should open and make sure it works (as much as I can test) before selling it off. That way I would know before selling it it had to be sent in for RMA. Right now it's just sitting on my desk in the carrier box still. I peaked in the box to make sure I knew what it was then closed it back up. Thoughts? No matter what I only plan to sell it for exactly what I have into it (much less than the other one I saw on ebay) as I want someone who will use it to get it and am not looking to make a profit. So NIB vs. Open Box would be sold at the same price imo. Thanks in advance. 2 Quote Link to post Share on other sites
EskeRahn 5,421 Posted August 19, 2022 Share Posted August 19, 2022 Sad that you do not like it. Well if the box has been opened anyway, I see no potential drop in value by you having tried it out also. From the experiences with the Pro1 we know that FxTec has the policy that the warranty follows the device, so should it be somehow faulty, the new owner will have the same rights as you have.. But obviously if you have tried it and it works flawlessly, it reduces the risk of a DOA device for the new owner. 1 Quote Link to post Share on other sites
Hook 2,940 Posted August 19, 2022 Share Posted August 19, 2022 (edited) If you really aren't interested in the phone, leave it closed box. As @EskeRahnsaid, FxTec will honor the warranty for the new owner. If you don't know if you want the device or not, but are worried that open box and tested will lower the value, I wouldn't worry. Take it out, try it out, see if it might be something you want after all. I don't think there is any reason to charge less for open box and tested (again, the warranty will still be good for the new owner), and, who knows, maybe you'll change your mind. 😉 Edited August 19, 2022 by Hook 3 Quote Link to post Share on other sites
VaZso 1,997 Posted August 19, 2022 Share Posted August 19, 2022 @Logan, right, as others say, it is nothing to lose if you try it out. 🙂 It may also worths waiting for a firmware upgrade anyway before a final decision. One advice based on earlier experiences with Pro1 is to handle the back sticker with care, your hand may easily worn its text - and that is what you don't want if you may want to sell it to somebody. I have removed my sticker of Pro1 and put it back to its box anyway. Otherwise it does not matter if you try it out I think. 2 Quote Link to post Share on other sites
Logan 22 Posted August 19, 2022 Share Posted August 19, 2022 Thank you everyone! I've wanted a new keyboard phone ever since my Droid 3 was retired, and I expect LinageOS/firmware will fix many of the issues talked about on here. Really it's the lack of a solid hard/rubber case to protect the phone that keeps me from being able to find any use for it (even an official CAD file to get one 3d printed by a friend). The environments I work in pretty much demand that kind of protection. I crack a screen protector 2-3 times a year and my phone and between work and children the phone does find it's way to the ground at least once a year. Quote Link to post Share on other sites
Logan 22 Posted August 19, 2022 Share Posted August 19, 2022 After seeing all the quick replies I decided I would open it up and just check it out (after finding a thingiverse possible case solution). Everything works perfectly (well I haven't tried to charge it yet, or traveled away from my home): wifi seems as good or better than my 2XL, Verizon works when swapping SIM from my old 2XL (calls in/out, text in/out), speakers sound good, screen rotates as expected... Really I am starting to feel good about this device...I still want LinageOS so I don't need to have all the Google default cruft, but still being ASOP basically the phone is quick and smooth. I installed all my Apps, and for now turned it off and put it away until I solve the cause issue (buddy with 3D printer will look at what I sent him). If that case solution works I may actually keep this phone (https://www.thingiverse.com/thing:4617029 and https://www.thingiverse.com/thing:4618945) 6 Quote Link to post Share on other sites
resister 10 Posted August 22, 2022 Share Posted August 22, 2022 https://www.ebay.com/itm/403845178041 1 Quote Link to post Share on other sites
EskeRahn 5,421 Posted August 22, 2022 Share Posted August 22, 2022 Sad that it is not for you, hope you get a good price. 🙂 Quote Link to post Share on other sites
Doktor Oswaldo 904 Posted August 22, 2022 Share Posted August 22, 2022 I really wonder. The ebay says unused, so I suspected scalping. But joes account seems to had some valid questions. So may we ask why it gets sold? 1 Quote Link to post Share on other sites
MrPib 31 Posted August 22, 2022 Share Posted August 22, 2022 Definitely interested in this. Have you tried out the unit at all? Specifically, bad wifi/gps/cellular & crackling speakers. 1 Quote Link to post Share on other sites
xhajt03 27 Posted August 30, 2022 Share Posted August 30, 2022 Hello Logan, do you have any update on this? I see that the linked case design was for Pro1 rather than Pro1x. I wonder if all the controls, sensors, etc. are exactly the same size and location on both models (otherwise some updates would be necessary). Quote Link to post Share on other sites
VaZso 1,997 Posted August 30, 2022 Share Posted August 30, 2022 2 hours ago, xhajt03 said: Hello Logan, do you have any update on this? I see that the linked case design was for Pro1 rather than Pro1x. I wonder if all the controls, sensors, etc. are exactly the same size and location on both models (otherwise some updates would be necessary). Basically sensors and buttons are at the same positions, only camera has a small difference (camera of Pro1X is out a bit by design). 1 Quote Link to post Share on other sites
EskeRahn 5,421 Posted August 30, 2022 Share Posted August 30, 2022 2 hours ago, VaZso said: Basically sensors and buttons are at the same positions, only camera has a small difference (camera of Pro1X is out a bit by design). From what I could mesure, the camera 'island' is a 0.8mm 'bump'. So would have to be a really tight fit covering the camera, to make any difference 2 Quote Link to post Share on other sites
Mysti-Que2020 20 Posted August 31, 2022 Share Posted August 31, 2022 (edited) The time has come for me to sell and get a more reliable phone. I do love texting/sending emails but where I live my connection is not great. Fx support did email me that they are trying to fix the connectivity with a firmware about but how soon will that take. It's a love/hate relationship with the phone. If all the bugs are fixed then I'll reconsider purchasing it again but right now back to my old phone 😞 https://www.ebay.com/itm/225142189554?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=6kQlNQXpRxq&sssrc=2051273&ssuid=6kQlNQXpRxq&var=&widget_ver=artemis&media=COPY Edited September 2, 2022 by EskeRahn (added to the title that it is sold) 1 Quote Link to post Share on other sites
xhajt03 27 Posted August 31, 2022 Share Posted August 31, 2022 OK, thanks - the hole for camera seems to be big enough to cover for a slight difference in the position. 🙂 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.