EskeRahn

What ever it was, it fixed it self about 3d after install.... See this collage of roughly 2x5 days stitched together. (So must have been an app-issue, or net glitch after all) Note the slope of the two added green lines. 10 percent point a day idle consummation is not bad. :)

On the Pro1 *#*#4636#*#*

@Dean disagreements are fine, but personal attacks on other forum members are not!

Update to March 16, with March 5 security patch using OTA went smoothly. Known keyboard bug still there (see lineage thread) (The stage after download and install called "Finalising package installation" is surprising slow though - like it is on LineageOS)

There might be something rotten in the new version, it eats battery at an alarming rate while idle. (same programs running, most killed with Greenify as usual, and according to Gsam, the apps is responsible for less than 1%. No phone connection, WiFi only - it is the preproduction unit with no Imei) (Before charge was the old version. charged and upgraded)

The short answer is No, not out of the box. The longer answer is that the feature is inside Android, and is a matter of wether the keyboard-setup file defines the keyboard as a full keyboard or a reduced one. And the full one does not have the 'sticky' feature, but the partly does. See e.g. this. I'm not aware if some software on top, e.g. SwiftKey might offer an option for sticky shift even on a full keyboard.

Interresting. I have never found a pattern to actively provoke it, so could not tell if it is luck you did not see it or if fixed. But let us hope it has been fixed.

(lineage-18.1-20220314-nightly-pro1-signed.zip on March 5 security patch installed smoothly using OTA ) ...But the reintroduced (early August) Accessibility / keyboard bug is not (yet) fixed. The stage after download and install called "Finalising package installation" is surprising slow though)

When opening and mounting a new display, consider to also add a slight diffuser for the LED. @SCΛRECROW reported good result with simple mate tape here

Update to March 9, with Februrary 5 security patch using OTA went smoothly. Known keyboard bug still there (see lineage thread) (The stage after download and install called "Finalising package installation" is surprising slow though - like it is on LineageOS)

I think you should start to see what models you can get a HK wallet for. And then start by ruling out the too short and too narrow ones. Most likely you will have to end up buying one slightly too large, with ROUGHLY similar camera holes, and carefully remove the holster part, and then find a simple tpu-case that suits the pro1, and glue that on the inside of the wallet were the old sat, and do any cuttings/adjustments for camera etc. Here is a list of currently known devices with roughly similar dimensions as the bottom half. https://www.gsmarena.com/results.php3?nHeightMin=153&

Yes, I guess it would have been a bureaucratic mess to make an infinitesimally small change to the Pro1X, say black housing, and called that say Pro1W and have that been for pre-orders and the other IGG-perks - with individuals preferring the other than what they were in for. Of the major changes they were forced to make after they got swindled, the drop of the 'IGG exclusivity' of the Pro1X variant was one of the least ones IMHO.

(lineage-18.1-20220307-nightly-pro1-signed.zip on February 5 security patch installed smoothly using OTA ) ...But the reintroduced (early August) Accessibility / keyboard bug is not (yet) fixed. The stage after download and install called "Finalising package installation" is surprising slow though)

The Priv, as well as the Pro1, and some Samsungs, is only curved in one direction. So it is fairly easy to make a real tempered glass screen protector for them. And I used them on the Priv. Despite searching quite a bit, I unfortunately have not found similar for the Pro1 or Elephone U (pro) using the same screen. I tried with a glass cutter to cut some intended for a Samsung S8+ with practically same width but longer - but was unable to, they all broke. ...You can still get them for a Priv. e.g. here

Thanks for the hint. I DO have the same problems, though it does not seem to help opening the keyboard. Sometimes the scanning works, but have not been able to do it in a reproducible way, nor do I see any pattern.

Yup. Especially if you use a dark theme, you will seldom see it.

Update to March 2, with Februrary 5 security patch using OTA went smoothly. Known keyboard bug still there (see lineage thread) (The stage after download and install called "Finalising package installation" is surprising slow though - like it is on LineageOS)

Sounds sad, but could be that they are merely saying that all that are in the pipeline for batches with shipping before that are allocated. But that could also be just my over-optimistic guess.

(lineage-18.1-20220228-nightly-pro1-signed.zip on February 5 security patch installed smoothly using OTA ) ...But the reintroduced (early August) Accessibility / keyboard bug is not (yet) fixed. The stage after download and install called "Finalising package installation" is surprising slow though)

All this driver stuff should be in a different thread. Any suggestions of a good thread? Then I will move it. 🙂

Would guess it is a bit tough to repair with home-stuff as it is supposed to be carrying significant currents, above 1A

Never actually used them. It was mostly a proof of concept. The touch worked as such though obviously not at the side edges

Update to February 23, with Februrary 5 security patch using OTA went smoothly. Known keyboard bug still there (see lineage thread) (The stage after download and install called "Finalising package installation" is surprising slow though - like it is on LineageOS)

Even the hugest players have problems getting components for their goods, so no big surprise that it goes for a tiny player too... If they are guilty of anything here, it is being over optimistic in these harsh times.

The big difference (for some companies) is that that the stock version has been certified by Google.