bundyo 32 Posted February 4, 2020 Share Posted February 4, 2020 57 minutes ago, sequestris said: Thanks. Seems to be fixed now 🙂 Unfortunately it dislodges again with every harder keyboard open. I'm beginning to suspect there is no screw under that cap. 😞 Quote Link to post Share on other sites
sequestris 710 Posted February 4, 2020 Share Posted February 4, 2020 6 minutes ago, bundyo said: Unfortunately it dislodges again with every harder keyboard open. I'm beginning to suspect there is no screw under that cap. 😞 I'll need to use the phone more to find out. I work from home and have a landline, so I haven't had quite the opportunities to play with it that others have. 1 Quote Link to post Share on other sites
Hook 3,020 Posted February 4, 2020 Share Posted February 4, 2020 3 hours ago, spence fx serial 809 said: anything on here about the keyboard backlight not lighting up about 30 to 40 perfect of the time...only an issue at night and currently cause still learning a few of the keys but i cant find a pattern to it just randomly 30 to 40 percent of the time and im poking in the dark Right now there is a known bug that when the screen goes off and the backlight does too, the backlight doesn't come back on with the screen. You have to close and reopen the keyboard. I believe it is being worked on. I don't know if that applies to all your cases or not. 1 Quote Link to post Share on other sites
Hook 3,020 Posted February 4, 2020 Share Posted February 4, 2020 3 hours ago, bundyo said: Unfortunately it dislodges again with every harder keyboard open. I'm beginning to suspect there is no screw under that cap. 😞 Look at your screws behind the screen-- they are covered by round black stickers. If any of those stickers aren't flush, you may need to pry off and tighten the screw. Quote Link to post Share on other sites
bundyo 32 Posted February 5, 2020 Share Posted February 5, 2020 (edited) 14 hours ago, Hook said: Look at your screws behind the screen-- they are covered by round black stickers. If any of those stickers aren't flush, you may need to pry off and tighten the screw. The back moves around 2mm outwards on hard close. The sticker stays in place regardless. This doesn't happen with any of the other stickers/panel edges. Keyboard-wise stickers are also almost a mm inset in the panel, so hard to pry off without destroying them. I'll take a closer look tonight, but my guess is that some screws were skipped while the phones were assembled. The other possible option is that the hard open slams the screen part to the keyboard part so hard, that it breaks the plastic that the screw is screwed in. Hoping that the screw is just missing. Edited February 5, 2020 by bundyo Quote Link to post Share on other sites
DieBruine 397 Posted February 5, 2020 Share Posted February 5, 2020 (edited) Not sure if this should be designated as a bug. But I myself do have issues with speaker volume (in call) being too high, even on the lowest setting. Anyone else who shares this opinion? If so I would describe the bug/issue a a way too high volume. Should have checked, it's in the bug tracker...🙄 Edited February 5, 2020 by DieBruine Quote Link to post Share on other sites
VaZso 1,998 Posted February 5, 2020 Share Posted February 5, 2020 33 minutes ago, DieBruine said: Not sure if this should be designated as a bug. But I myself do have issues with speaker volume (in call) being too high, even on the lowest setting. Anyone else who shares this opinion? If so I would describe the bug/issue a a way too high volume. As far as I know, it is a known bug... at least it works the same for me and I have also wrote it here. 1 Quote Link to post Share on other sites
Wasmachineman_NL 99 Posted February 5, 2020 Share Posted February 5, 2020 FinQwerty bug report: the Sym key does not turn the keyboard backlight back on when unlocking the Pro1. Â Quote Link to post Share on other sites
Benni 183 Posted February 5, 2020 Share Posted February 5, 2020 18 minutes ago, Wasmachineman_NL said: FinQwerty bug report: the Sym key does not turn the keyboard backlight back on when unlocking the Pro1. Â Please check the current version:Â https://github.com/anssih/finqwerty/releases And file finqwerty issues on github 1 Quote Link to post Share on other sites
david 929 Posted February 5, 2020 Share Posted February 5, 2020 (edited) I tried a USB-C to ethernet adapter with the Pro1 and it doesn't work.  https://www.amazon.com/Cable-Matters-Ethernet-Adapter-Gigabit/dp/B00X4S587K I tried it on a Pixel 1 and it worked fine. People on Amazon reported it working with a variety of android devices (Samsung Galaxy Tab A 10.1 (2019), Samsung A50, Pixel 3XL, Pixel XL, and a customized version of LineageOS 16.0 (Android Pie based) on an older Moto Tab). All of these were Android 9 or higher. Also works on Nexus 5X running Nougat. From what I can tell online, the drivers for the ethernet chipset are probably missing in the Pro1. It looks like it uses Realtek. I'm on stock firmware with the Pro1 (no OTA updates done yet).  Edited February 6, 2020 by david Quote Link to post Share on other sites
EskeRahn 5,460 Posted February 5, 2020 Share Posted February 5, 2020 3 hours ago, Wasmachineman_NL said: FinQwerty bug report: the Sym key does not turn the keyboard backlight back on when unlocking the Pro1. It is Alt+Sym (it emulates a Keyboard-Open, that for unknown reasons sends F6 key code) 2 Quote Link to post Share on other sites
adflau 13 Posted February 6, 2020 Share Posted February 6, 2020 Hello all IGG supporter from Canada, just received the pro1 and all things considered it was worth the wait, the only issue I would consider reporting is the tinting effect that has been mentioned elsewhere in the forum. The default colour temperature is already cooler than I prefer, (thankfully this can be adjusted to taste via apps) however about 1/3 down the brightness slider the colours appear to suddenly get pulled even cooler (bluer?). It is noticeable when the auto brightness slides around. Other than that, fantastic device I'm glad Fx team put in the effort to build such a device! Cheers! 1 1 Quote Link to post Share on other sites
FlyingAntero 871 Posted February 6, 2020 Share Posted February 6, 2020 On 2/3/2020 at 3:26 PM, FlyingAntero said: This happened to me 2 times yesterday. However, I have faced this issue only in Chrome so far even so I have been writing alot with other apps as well (mails, notes, docs etc). I faced this "one key reapeating" issue again. This was 4th time and it happened during writing a doc so it is not related to Chrome (like other ones have reported also). 1 Quote Link to post Share on other sites
VaZso 1,998 Posted February 6, 2020 Share Posted February 6, 2020 11 minutes ago, FlyingAntero said: I faced this "one key reapeating" issue again. This was 4th time and it happened during writing a doc so it is not related to Chrome (like other ones have reported also). It may be related to high CPU load... Quote Link to post Share on other sites
EskeRahn 5,460 Posted February 6, 2020 Share Posted February 6, 2020 56 minutes ago, J_P said: Is there actually a concise list of bugs being kept somewhere or are we just using this enormous thread? I am experiencing the issue with all learned fingerprints being forgotten. On build QX1000_EEA_20200106110245 . That was the purpose of the bug-thread, and there is this parallel discussion thread, but unfortunately the discussion end in the bugs-thread as well, And I have not found the time to clean up the mess, And no other mods seems to have either... Quote Link to post Share on other sites
EskeRahn 5,460 Posted February 6, 2020 Share Posted February 6, 2020 28 minutes ago, kontakt said: There is an unofficial list:Â https://docs.google.com/spreadsheets/d/15uE12Yv5nMvIF42U33cY5FQoF6M66QIn00cC876uf7Y/edit#gid=0 Interesting, thanks, May I suggest to expand that with a column of the Status with some 'fixed' values like "By design", "Known fix, next OTAU", "Will be fixed ASAP", "Will be fixed by/with Android 10", "Will not be fixed" And a Known workaround with Yes/No Quote Link to post Share on other sites
Benni 183 Posted February 6, 2020 Share Posted February 6, 2020 14 minutes ago, EskeRahn said: Interesting, thanks, May I suggest to expand that with a column of the Status with some 'fixed' values like "By design", "Known fix, next OTAU", "Will be fixed ASAP", "Will be fixed by/with Android 10", "Will not be fixed" And a Known workaround with Yes/No Done. Feel free to edit the doc yourself though 😄 1 2 Quote Link to post Share on other sites
rejujacob 77 Posted February 7, 2020 Author Share Posted February 7, 2020 Note sure if this was discussed before.. At the moment the "Ring Volume"Â controls both Ring and Notification volumes. But I need to control them separately. Maybe it can be incorporated in next update? Quote Link to post Share on other sites
EskeRahn 5,460 Posted February 7, 2020 Share Posted February 7, 2020 4 hours ago, rejujacob said: Note sure if this was discussed before.. At the moment the "Ring Volume"Â controls both Ring and Notification volumes. But I need to control them separately. Maybe it can be incorporated in next update? It has Quote Link to post Share on other sites
rejujacob 77 Posted February 7, 2020 Author Share Posted February 7, 2020 10 minutes ago, EskeRahn said: It has You mean it has been discussed before? Quote Link to post Share on other sites
Craig 1,435 Posted February 7, 2020 Share Posted February 7, 2020 Even if it has been discussed, it hasn't been added to the community buglist yet.  I didnt know ring volume and notification volume couldn't be controlled independently; is that standard android pie behavior? Or a bug fxtec somehow introduced? Or user error? Quote Link to post Share on other sites
Rob. S. 1,661 Posted February 7, 2020 Share Posted February 7, 2020 @Craig Interesting question. On my Moto Z3 Play running Pie I have media volume, call volume, ring volume, alarm volume, but no notification volume. I This is my first phone that gives me the impression that i can't seem to find the optimal sound volume for all the different noises it makes. Quote Link to post Share on other sites
EskeRahn 5,460 Posted February 7, 2020 Share Posted February 7, 2020 58 minutes ago, Rob. S. said: @Craig Interesting question. On my Moto Z3 Play running Pie I have media volume, call volume, ring volume, alarm volume, but no notification volume. I This is my first phone that gives me the impression that i can't seem to find the optimal sound volume for all the different noises it makes. The same I so on Pro1 as your Moto Z3, so must be stock android... Under notification I can select the noise but not the level. Quote Link to post Share on other sites
Rob. S. 1,661 Posted February 7, 2020 Share Posted February 7, 2020 (edited) I've done some more 'research' and there are volume apps which offer separate control of notification volume, and I now tried two (arbitrarily selected "Volume Manager" by ByteHamster and "Volume Control Panel Pro" by LeeDrOiD Apps), but at least with the Moto Z3 Play both the ring volume slider and the notification volume slider move when I move either of them. It seems, though, that there actually are some devices which do not physically combine both, even with Android 9 (see this thread on Reddit which is about a different subject but proves that someone managed to control ring volume and notification volume separately with Tasker), so I guess it might make sense to try it with the Pro¹, too, before dismissing the idea. If it doesn't work for the Pro¹ at this time, perhaps it might still be somehow implemented in the Pro¹'s Android? From what I've seen now, by the way, Android 10 doesn't seem to offer separate ring volume and notification volume controls, either; perhaps someone could confirm this with the Android 10 test builds for the Pro¹? For the time being, I can only think of one workaround, which is editing the audio file for the desired notification sound, lowering the volume and saving it as a new notification tone, then selecting this new sound as a notification sound. Edited February 7, 2020 by Rob. S. 1 Quote Link to post Share on other sites
John Veness 57 Posted February 8, 2020 Share Posted February 8, 2020 On 2/2/2020 at 9:42 PM, EskeRahn said: One could argue that used in portrait the arrow-functions should be rotated counter clockwise - but that might not be easy to make orientation dependent. My Sony Xperia Pro worked like this, so it's certainly doable in Android. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.