EskeRahn

The crucial steps here are these, to start right fastboot flash boot_a [TheImageNameGoesHere] fastboot --set-active=a

I bet it is a matter of setting the right slot active before flashing - your data should still be there. I use this script, to help me remember what to do... With the images as parameters 1 and 2, e.g. LineageFLASH.BAT LineageOS\lineage-16.0-20201012-recovery-pro1.img LineageOS\lineage-16.0-20201012-nightly-pro1-signed.zip @ECHO off if %1.==. goto :EOF ECHO * Wait for boot to bootloader to finish (or do manually holding VolDown+Power) adb reboot bootloader pause fastboot flash boot_a %1 fastboot --set-active=a REM fastboot reboot recovery does not work, so do manually:

Interesting thing, I still did not immediately spot it even in you cropped image. I guess we simply do not expect Download to be top right? Allow me to suggest a little waste of screen estate:

Oh sorry, I completely forgot you made this. 😔

You think a phone with a good old hardware power off for the battery? That would be awesome. For my spare&emergency phones with removable batteries, I put in a small piece of plastic between the battery and the contacts, and this allows the battery to keep its charge for many many months

Just to make sure, please note that the side buttons as well as the small front support arm can rattle a bit, so try to put a finger on the arm of the opened Pro1, and 'shake' the phone, to make sure this arm is not what you are hearing. (that sound is easily remedied with a small piece of self adhesive rubber or felt in the 'groove' of the arm)

Alain Grange made a specific "Keyboard Browser", I must admit I haven't used it for quite a while. but it is clearly designed with a real keyboard in mind.

We know from elsewhere that contacting again make their mail system put the pending mails from you to the back of the queue. So if their mail back-log is longer than a week, they might not have seen your mails. (others more knowing in support-queues might better explain why it is set up this way. My guess is that if you found a solution to an issue yourself, and mail to say so, it makes sense to push back the original message so the two mails can be handled as one with less urgency. That is you can move yourself backwards not forwards in the queue)

Just tried it. Works fine here, both stock and LineageOS (not rooted) I uninstalled it again, as it requires a terrible amount of high privileges requires a REALLY long pull up of the 'pill' to work (as does default Android if you do not disable the "Swipe up home button" gesture)

Indeed, they can also be bad in the lack of shielding or twisted data-wires, not allowing high speed data... But the impedance obviously matter for fast charging.

Similar goes for USB-A to USB-C cables. It is not always that the vendors ratings translates directly. Especially for stuff from 'unknown' brands, this can be quite a jungle. My 'answer' has been trial-and-error...

Some apps allows the bar to be hidden, so a launcher might do that as well I guess.

Indeed things are likely to be improved, but this particular aspect seems to be the same. At the least it was until the last keyboard I checked.

As far as I have been able figure out studying the two offered keyboards, they have an identical base, with some coloured yellow squares (green for caps), and then finalised with different layers of black on top. If you look carefully at the top left of the Q, W and E keys on the shifted qwertY, you will note a square that looks slightly different when the light hits at the exact right angle. I'm 99% sure that this is the square for the symbols on W, E and R on the qwertZ. that is hidden by the black paint. (On the preproduction-unit the green dot for caps was quite small, And was e

I took the liberty to move yours and a few other comments over here. I guess the problem is that we do not know the volume needed to make a layout profitable. I have previously mentioned that I would find it a very good subject for crowdfunding. If enough what to fund it then make it. In principle one rich guy might want to fund the layout he prefers, despite no one else shows any interest.... I doubt we are enough Pro1-owners in Demark to sustain a Danish layout, but including all of Scandinavia, we might be able to fund a Scandinavian layout. But a much larger numb

The first is nice, thanks. The second sounds really odd, I bet it is something else that 'ate' your Pro1's stamina. Though the percentages we see are estimates and not something that can be measured accurately, I have not seen them being substantially off, no matter what charger I have used. So when it is above 90% it is practically full. But apps I would not expect to use substantial amounts of power can do so. I would suggest to install a battery-monitor app, to hunr the culprit(s) eating the battery. I use GSAM and 3C Battery (well I use the larger toolbox, but the standalone tool wi

As I understand it they sent out a new batch a short while ago 🙂, so I guess handling that might well have been prolonging the support queue 😥, as the same people fills multiple function in this start-up company.

This part is a general thing, and I advise people to ONLY use fast charging when strictly needed, for any device with a not easy user-replaceable battery. (see other threads) The Fingerprint-reader-issues sounds like a hardware failure, I suggest you to contact Support https://fxtec.com/support

(lineage-16.0-20201012-nightly-pro1-signed.zip including Ocotber security patch installed smoothly using sideload, with and without addonsu)

Unless the app is 'key aware', my guess would be that the app should expose taking a picture as an "Activity" (sub-part of an app), and then to get the key associated with that. See e.g. the app "Activity Launcher" that can create a short-cut for an activity, to use as an icon in your launcher. But in offering this, it gives an overview of "activities" available from each app. Unfortunately we only get a name, not a description of the activity, so sometimes it is pure guesswork to search for something interesting... The snapdragon app offer five "activities", where e.g. OpenCamera on

Apart from alternative apps already suggested, you might also try to go into Settings, Apps find Snadragon Camera and under Storage and Clear the cache and storage

Just tried still (again?) says "Out of stock"...

Never noticed it bwfore, but looking carefully, I got it too on the "Final Sample" unit, (but not the Retail unit).

Yes, this (sadly) sounds like a plausible explanation. However there also seems to be a substantiai gab between the two halves in the last ten seconds? That does not look right to me.

The corner of the camera button and the usb-plug, to avoid confusion on how you hold it talking top, left etc...