Tsunero 215 Posted June 5, 2020 Share Posted June 5, 2020 2 hours ago, EskeRahn said: I'm not sure who you were replying. The Dux ducis is plastic. See their own page Yeah it's not "real" leather. By the way it seems putting some weights on it will work in the long run to keep the shape. Compared to yesterday there was already a big improvement. 1 Quote Link to post Share on other sites
EskeRahn 5,460 Posted June 5, 2020 Share Posted June 5, 2020 5 hours ago, Tsunero said: Yeah it's not "real" leather. "PU leather" Reads: Phew 'leather' 😇 2 Quote Link to post Share on other sites
mv 85 Posted June 9, 2020 Share Posted June 9, 2020 On 6/5/2020 at 9:53 AM, EskeRahn said: I'm not sure who you were replying. The Dux ducis is plastic. See their own page ah sorry about that missed quote. I see that link though the options in the US from what I found are first not this item but all listing leather. If i can find a way to get in the US i think i might get it. Though my phone is in london at the moment getting fixed. Wonder if I could ask fxtec to throw one in on the way back. Course I would pay for it. Quote Link to post Share on other sites
Raksura 270 Posted June 10, 2020 Share Posted June 10, 2020 (edited) I bought a nice magnetic case that seemed very sturdy, but it ended up not being usable, since the phone holder is rigid (and it would need like 1 or 2 extra millimeters). I also had a rather rubbery phone holder for a flip case that was not sturdy enough for my tastes. I tinkered a "best of both worlds" version: I used some strong glue to get the magnet attached, so that it's not just held by tape. Some laundry clips straight out of the garden. By pure coincidence, my mom actually brought prawns for dinner while I was working on the cover, so I knew I had to take a picture. Also had to explain and translate the inside joke. There's not enough feedback on that button, I don't like it. The fingerprint reader is hidden, but that is on purpose. It ends up working as well as I hoped. I still need to make a hole for the notification led. Edited June 10, 2020 by Raksura 3 Quote Link to post Share on other sites
MvBoe 31 Posted June 13, 2020 Share Posted June 13, 2020 If you are interested in a fitBAG bag: https://www.ebay.de/itm/303595116751?ul_noapp=true Shipping is also possible to Europe. Quote Link to post Share on other sites
EskeRahn 5,460 Posted June 15, 2020 Share Posted June 15, 2020 Tried this flip case for Nova 5T and Honor 20 https://www.ebay.co.uk/itm/352897154905?var=622151625395 The shell fits fine, but the flip is too tight to close around the Pro1. 😥 Quote Link to post Share on other sites
marmistrz 93 Posted June 20, 2020 Share Posted June 20, 2020 Could we have some community wiki about the protective cases? I know about the blogpost by @EskeRahn, but I saw that others recommended some other cases... and I don't think I have the time to get through 34 pages of the thread 🙂 2 Quote Link to post Share on other sites
Raksura 270 Posted June 20, 2020 Share Posted June 20, 2020 26 minutes ago, marmistrz said: Could we have some community wiki about the protective cases? I know about the blogpost by @EskeRahn, but I saw that others recommended some other cases... and I don't think I have the time to get through 34 pages of the thread 🙂 Great idea. We could definitely use a community wiki, in general. 2 Quote Link to post Share on other sites
illie-vanilli 58 Posted July 9, 2020 Share Posted July 9, 2020 On 4/13/2020 at 4:52 PM, illie-vanilli said: The ebay version is no longer available, but I noticed this is also available on the wish app (and perhaps therfore also on Ali Express, but can't check that yet). Pictures are very similar to these and colorscheme is the same. Going to order one to see how the quality turns out, but if someone else want to check it out, it's described on Wish as follows (see attached picture) (just noticed part of the description is missing, but it's also available for the huawei p20 pro) Okay so this took 3 months to finally arrive 😅, but now that it is here and since I don't think ahunter shared photo's yet, here are a couple of pictures I made. Adjustments are fairly easy, I just used a sharp nail scissors to both pierce and trim holes. I didn't make holes for the volume buttons, because the outer-'buttons' on the side can be used for those (power is volume down, volume down is up). I did have to cut holes for the following entrances: charger entrance (this one I just 'connected' to the two holes that were already present there, gave a cleaner result really) fingerprintreader (ended up cutting off the side, see picture, it made using that easier) power button 3,5mm jack-entrance made the existing hole for the speaker on the top a little larger A tiny hole next to the back-camera for the mic there if you use the shutter button a hole is needed for that, but I left it like it is since my current camera-app doesn't respond to the button Taking photo's works perfectly, the flash is only a problem when the phone is in the wallet (but I think that is pretty common). I demonstrated that with taking pictures of the scissors. Sound is working very well, no difference in or out of the case. I cut a tiny hole for the back-mic, and it appears to be working as well. The magnet is actually more sturdy than I expected. I made some videos of the usage of it but I don't think it is possible to upload them to the forums. If anyone has a tip as to share those videos I'm more than happy to. All in all a pretty decent case, especially regarding the price I am very happy with it. You can use it both in and outside the wallet fine. 1 Quote Link to post Share on other sites
FlyingAntero 871 Posted July 14, 2020 Share Posted July 14, 2020 I am using a PURO 1-in-2 magnet flip case for Huawei P30 Pro with my Pro1. See the pictures below. https://imgur.com/a/a8A7iZT I am not using the separate hard case so the Pro1 is attached to leather flip case with double sided tape. Also, a small magnet is added under the leather where you normally place a credit card so flip case can be used with Fx Service. I think that the end result is pretty neat. Later on, I might try to create a magnet hard case that can by used with my flip case. However, I am not sure if the thickness is enough for separate hard case. 3 Quote Link to post Share on other sites
EskeRahn 5,460 Posted July 14, 2020 Share Posted July 14, 2020 13 minutes ago, FlyingAntero said: Also, a small magnet is added under the leather where you normally place a credit card so flip case can be used with Fx Service. Note that your image indicates you placed the magnet a bit away from the sensor, so if if you experience problems, you might want to try to move it a bit. See the image I added here 3 Quote Link to post Share on other sites
FlyingAntero 871 Posted July 14, 2020 Share Posted July 14, 2020 18 minutes ago, EskeRahn said: Note that your image indicates you placed the magnet a bit away from the sensor, so if if you experience problems, you might want to try to move it a bit. See the image I added here I am aware of that but so far everything is working great. I will move it a bit if I face issues. PS. Actually, the case is not made by me. It was made by previous owner of this Pro1. 2 Quote Link to post Share on other sites
MickH 211 Posted July 15, 2020 Share Posted July 15, 2020 I guess I was lucky with my case. It was a freebie off Wish.com, (can't post a link, sorry), took about 2 months to arrive, but the phone fits perfectly and the cover closes completely. Just used a hole punch to make holes where they were needed and "voilà". The shutter button isn't very accessible, I don't use it anyway. There's 2 blisters near the volume buttons, but these are for the Huawei P20 so don't line up with the Pro1 controls, but with a bit of groping about along there the volume buttons do work. I've softened the PU of the magnetic clasp so when the case is open it falls down behind the case rather then falling down in front of the screen. 1 Quote Link to post Share on other sites
DieBruine 397 Posted August 3, 2020 Share Posted August 3, 2020 (edited) Since our phones are on the way I took the liberty of unpacking the Snakehive wallets as suggested (by Slion) in this topic. Pffff those bumpers are a real piece of 💩. First of all, the phone doesn't fit very well. Apart from that, it's the lowest quality silicone I have ever dealt with. I started modding all the current and required holes with a Dremel. These bumpers have some flex! It took me hours to mod them. But, I still don't trust them. The phones come out to easily. So, I've ordered the Ebay bumper noted earlier by EskeRahn, which I also purchased previously. For the time being I will use double sided tape to make sure the phones stay in the current-Snakehive bumper. But as soon as the Ebay bumpers are delivered, I'm swapping them. I've dropped my Pro1 multiple times. That Ebay bumper has kept the phone inside. And the BSE screen protector has done it's job very well so far. So the Snakehive+Ebay bumper and maybe an BSE screen protector should be a very good combination. Edited August 3, 2020 by DieBruine 1 Quote Link to post Share on other sites
pistikem 85 Posted August 4, 2020 Share Posted August 4, 2020 i wrote - like others too - a few months ago a few words about my experience with the Snakehive wallet, see here and here. so far i am pretty happy with the result, no major complains about this new wallet & case (TIYA P20 Pro TPU) combination. Quote Link to post Share on other sites
EskeRahn 5,460 Posted August 4, 2020 Share Posted August 4, 2020 Half a year ago (Feb. 2.) I ordered some full body P20 Pro cases that despite the Corona mess arrived Friday!!https://www.ebay.co.uk/itm/254225379991?var=553618778779 The bottom half is of no use to us, but the top half fits the screen half of the Pro1 almost PERFECTLY, so can be used with any of the usual cases on the lower half. The combo is not a perfect fit, as it does not close completely, but gives a VERY good protection, and SUPER easy to open, at the cost of the edge-usage as some disables anyway.... Simply lifting in the top half opens the device by pure gravity. Or held in the bottom half, only a slight push is enough to open it, and the material dampens the sound Quote Link to post Share on other sites
belletrist 59 Posted August 4, 2020 Share Posted August 4, 2020 17 hours ago, DieBruine said: I've dropped my Pro1 multiple times. I've done the same thing. I've found that a strip of Duct tape across the back and one side works wonders in solving this issue. 1 Quote Link to post Share on other sites
Slion 1,201 Posted August 4, 2020 Share Posted August 4, 2020 (edited) 18 hours ago, DieBruine said: Snakehive wallets as suggested (by Slion) in this topic. Pffff those bumpers are a real piece of 💩. First of all, the phone doesn't fit very well. Apart from that, it's the lowest quality silicone I have ever dealt with. Which one did you get P20 Pro or P30 Pro? Regardless, the TPU case from Snakehive is really poor quality indeed. I've since replaced mines with that one using that glue. Even on high quality TPU case making a cutout for the camera button can compromise stability so you may want to give up on your camera button. Edited August 4, 2020 by Slion Quote Link to post Share on other sites
DieBruine 397 Posted August 4, 2020 Share Posted August 4, 2020 (edited) 29 minutes ago, Slion said: These two: https://www.ebay.de/itm/254181243108 And yes the P20 Pro versions. The first one is pretty thick. The second one feels thinner but also cheaper. Nonetheless, it (2nd) will fit the Snakehive and suit it well I think. I'll probably just drill a small hole in the back for the NC-mic on the back. And afterwards maybe use some epoxy or something alike to protect the hole. I'm certainly not going to sow that small hole as Snakehive has done 😅. I am still using the second one (Ebay/right on in the picture below) because overall it's thinner. I think it is 0.6~0.8mm thinner. And I personally do not use a wallet. Wife and kids... Edited August 4, 2020 by DieBruine Quote Link to post Share on other sites
Hook 3,020 Posted August 4, 2020 Share Posted August 4, 2020 Just thought I'd resurrect my solution for all the newcomers. I hate cases and, going back to my Palm PDAs, have never used cases. However, the back of the Pro1 is pretty slick. So I put a black matte textured skin on and it gives it just enough grip that I never drop the phone in the first place (haha famous last words. 😄 ) The skin is very snug and months later shows no wear or coming loose at the edges. Perfect solution for me, YMMV. 1 2 Quote Link to post Share on other sites
Tsunero 215 Posted August 4, 2020 Share Posted August 4, 2020 I am still kinda sad there is no official silicone case (or third party) and we have to DIY from Huawei P20 Pro cases. lmao 1 Quote Link to post Share on other sites
DieBruine 397 Posted August 4, 2020 Share Posted August 4, 2020 Yeah, well with less than 2000 devices out there, we won't get any cases soon. Which is pretty strange since I'm pretty sure the factory should have some shells they could hand-off to the any of the manufacturers within a square mile... 2 Quote Link to post Share on other sites
EskeRahn 5,460 Posted August 4, 2020 Share Posted August 4, 2020 2 hours ago, DieBruine said: Yeah, well with less than 2000 devices out there, we won't get any cases soon. Which is pretty strange since I'm pretty sure the factory should have some shells they could hand-off to the any of the manufacturers within a square mile... Actually they DID plan a shell, and even had prototypes shown in here. But the result was not exactly good looking, And let us be honest. None of the DIY designs could give a slick result, even if made for a perfect fit. They all look more or less bad, and certainly in no ways as slick as the Pro1 by it self. Sure some of the flip cases looks OK closed, but that is hiding the phone, not a slick result while using the phone. Quote Link to post Share on other sites
DieBruine 397 Posted August 4, 2020 Share Posted August 4, 2020 I would be very happy with half a bumper for just the back tailored to Pro1-spec instead of P20 Pro 😑. 2 Quote Link to post Share on other sites
EskeRahn 5,460 Posted August 4, 2020 Share Posted August 4, 2020 1 hour ago, DieBruine said: I would be very happy with half a bumper for just the back tailored to Pro1-spec instead of P20 Pro 😑. Oh it sure would be better than a modified P20Pro case. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.