Leaderboard
Popular Content
Showing content with the highest reputation on 01/20/2020 in all areas
-
Just finished a quick sketch of the bottom part of the protective cover: Will run a test print tonight to get first dimensions with hard plastic to see how the shell fits, then adjust and further develop. The plan is that the fit should be about 0.5-1mm too tight. That way silicone will grab itself onto the enclosure :). The holes for the switches are temporary for allignment, on the end design these will be filled in with silicone aswell, that way the entire bottom is enclosed and the rockers will go slightly heavier from pressing the silicone layer between them.8 points
-
Stock assigned here, too, #16xxx, US QWERTY, order status has changed to "Completed". Hopefully we'll see tracking numbers this week.8 points
-
Stock assigned Order #321xx qwertZ EU/Germany IGG Coupon 19. August8 points
-
Stock assigned. Usa qwerty 15xxx non igg paid once option available for pre-order on Aug 2 pre-order may 297 points
-
Stock assigned. Order 11### QWERTY EU Paid 1.8.20197 points
-
Just got my stock assigned email. No IGG coupon. QWERTY. Order #19xxx. Paid on August 4th.7 points
-
Also just got a stock assigned e-mail - IGG order, EU, QWERTZ.7 points
-
Got the email. Canadian, non-IGG preorder.7 points
-
Got the "stock assigned" email. QWERTZ, Germany, IGG7 points
-
7 points
-
I did make one but i don't think it's perfect yet, especially the front part7 points
-
Stock assigned, paid August 20th by banktransfer. No IGG, QWERTY, Netherlands!6 points
-
qwerty Order #11xxx igg, happy to say i got my stock assigned letter6 points
-
It's like busses...... I received my Pro 1 stock assigned number. O/N 7XXX QWERTY Europe (UK) non-IGG and paid Wed, 31 Jul 2019. Also received my shipping/dispatch details for my Pine phone (Brave Heart) this morning (shipping from China). Looks like we've got a race on Mr postman 😄 \o/6 points
-
adding mine to the pile, stock assigned order#6XXX QWERTY Europe, non-IGG, paid 2nd of August. finally, my battery only lasts 4 hours per charge.6 points
-
I got mine. Order 14xxx QWERTY USA6 points
-
Is it even with replying considering how many replies this has gotten already? Oh well. Stock assigned, QWERTY, UK, #11XXX, non-IGG6 points
-
Also got Stock Assigned email 😁 EU, QWERTY, #8xxx, Non IGG6 points
-
Stock assigned EU, QWERTY, #8xxx, IGG6 points
-
Finally the stock assigned email! IGG, QWERTZ, Germany6 points
-
@Keyahnig I was planning to draw a 3d printed design for the Pro1. Do you happen to have the files in Fusion360 format (.STEP or other), I would love to customize it and see if I can make a decent mold for it to pour them out of silicone. If that works out properly I might be able to do a "small production" run on those for who needs a bumper 😁.6 points
-
Just got the "stock assigned" email. QWERTY, Austria/Europe, 2x IGG-backer6 points
-
Got the "stock assigned" email.6 points
-
The back turned out quite good thought. You all can do with those files whatever you want. CASEBOT6.stl6 points
-
Hehe, same for me also. 🙂 However, PinePhone's courier told usual shipping time as 10-14 days and I think F(x)tec uses a more expensive shipping company with pre-paid TAX, so Pro1 should arrive earlier I think. 🙂 However, if you expect both of them early February then it will be a real race. 🙂 Anyway, two different phones to play with takes much more free time. 😄5 points
-
The first test molds will be transparant to make sure it all is a good fit. After that I will likely only produce them in black unless there is alot of interest in other colors (Every one of them will be produced at home and I do it purely as a hobby 😁.5 points
-
Received stock assigned email about an hour ago. EU, QWERTY, #8xxx, non-IGG. Paid in second week of August .5 points
-
Same, stock assigned this morning. Looking like lots of people have! US model (Canada), QWERTY, #7XXX, non-IGG. Order status still saying "Processing" though, hope this changes soon...5 points
-
just arrived in my mail box : stock assigned - ordered from Montréal Canada - QWERTY - order #62** - non-IGG - payed 2019-07-01 :5 points
-
While the afternoon is indeed ending in Hong Kong, it's still the morning in the EU (and the UK). Depending on who sends the notifications, we might still have to wait for 10 hours or so before their work day is over. Also, come on, it's F(x)tec we're talking about here. There should still be at least a small 24h delay, to stay on brand.5 points
-
Got stock assigned email also! Order late 4xxx, IGG coupon, QWERTY... Destination: Canada!4 points
-
Got the email as everyone else here, IGG, QWERTZ EU 12XXX, checks out. But my order status is still "Processing"... really hope that's nothing to be worried about at this point.4 points
-
Stock assigned Order #78xx QWERTY USA No IGG coupon Paid 7/31/20194 points
-
Thanks for the quick response. In that case I will draw one out from scratch with my caliper when I have the time 🙂 or perhaps @Erik knows someone at F(x)Tec who is willing to share a 3d model of the outer shell of the Pro1?😏4 points
-
That I cannot answer yet, considering it all depends on how well the mold works out and the wear/tear on it. I dont own a vacuum chamber currently so when pouring I have to pour very slow to prevent a buildup on air bubbles. Once I got the first casts done I can give more information on how many I can produce on daily base next to my day job 😄4 points
-
Got the stock assignment mail! It feels like the best Monday ever. Order number: 11xxx Paid 1st of August Indiegogo coupon QWERTZ EU Order status: "Completed" Thanks for the team!4 points
-
4 points
-
stock assigned mail is in. shipped in the coming days it says, if everything i ever bought from china is any indication, the phone will take somewhere between 2 days and 2 months to get here.4 points
-
Screen arrived in perfecr condition and looks like a perfect fit. Will report once I got to replacing it.4 points
-
The front part is definitely not perfect yet. It even covers the notification LED. CASETOP1.STL4 points
-
Looks good! Though I think the flat part is a bit wider, that is the curved part is less. I would say about similar to your drawing but on the other side of the flash. And I think you should try to narrow it a bit towards the top, that is not a straight side. ADD: tried to take a picture against a grey screen, with the other Pro1, stock camera-software, slightly rotated and cropped.3 points
-
Order #48xx, ordered February 27th, paid August 1st, delivery to Finland/EU, no igg coupon, qwertz, got stock assigned email today. Thank you a lot!3 points
-
Stock assigned, QWERTZ, #5XXX, Germany Yeah!!3 points
-
I got a "Pro1 shipping update January" email, hoping thats the "assigned" email I've been waiting months for. [Order #225xx] (July 15, 2019), QWERTY, IGG Backer.3 points
-
Stock assigned, QWERTY, #4XXX, IGG3 points
-
Finally got one! (Stock assigned) Order number #16xxx (USA)3 points
-
Actually I am of the opinion, that I might not have to open the lower part of the phone. In theory I would open the upper part with just the screen. But I will take pictures regardless of whatever I have to open to replace it.3 points
-
“The product is currently in our fulfilment warehouse awaiting to be packaged up and shipped to you in the coming days. Our warehouse is processing the queue as quickly as possible before their shutdown for the Chinese New Year holidays.” loophole?3 points
-
No problem with opening and closing. It's pretty ugly but it seems to do its job. Iused with TPU. I don't think a hard material will work but I haven't tried it.3 points